We found the following complaints for PLYMOUTH VOYAGER (1993)
Read complaints for PLYMOUTH VOYAGER (1993)
My girl friend and i wher voming home from portland,meon themaine turnpikeand she started getting tiredso she pulls in to the next rest area and i took over driving . As i started to gain speed turning out of the rest areaon to the turnpike i felt the steering wheel catch upand i had to give the steering wheel a good jurk to get the steering wheel to streghten up . Then i heard a snapabd the air bag light came on and i lost my horn and cruise control.when we got homethe next day i took the air bag out for fear it might go off.
Clock sping is a wire harness located in the steering column that controls the driver side air bag, horn & cruise contol . When damaged from no fault on part of the driver the horn will not work the air bag will not deploy when needed or might deploy without any impact . I feel that this is a safty defect that should be repaired by the manufacturer at no cost to the consumer.
Consumer states that while driving the air bag light is on,the dealer said that there was a short in the computer.
Airbag light came on, and horn/cruise control stopped working. Dealer determined clock spring assembly needed to be replaced.
Dealership refused to send a mechanic to repair 3 recall notices, including recall 99v113000/ air bag failure; recall 97v148000/ seat belt failure, and 96v099ooo/ abs brake failure.authorized another mechanic to perform work to repairrecall, or provideconsumer withnecessary parts to repair the defects.consumer was informed thatdealership wasunder no obligation to perform these functions. The consumer had asked the manufacturer for assistance in repairing the steering wheel, the windshield wiper pivot and lift gate supprt bolts, because theparts were defective, but the manufacturer refused to help.
Consumer's vehicle was hit at 35 mph on front driver's side. Upon impact,front air bags did not deploy.dealership was notified, but did not resolve the problem.
Consumer states that air bag indicator lightis inoperable, the light does not go off,giving the consumer the indication that the bag might deploy. Dealer says that air bag has to be replaced with a $500.00charge.
Consumer was in an accident rear end and the air bag didn't deployed.tt
While backing out of parking space driver's airbag deployed. No injury.
While driving about 30 mph vehicle was struck on the front inhead to head collision, and air bags did not deploy. *ml
Struck a pole and passengers side air bag did not deploy.tt
While moving from a stop sign was struck by another vehicle on the passenger's side,and driver's air bag did not deploy.
Van was in an accident the front driver side seat belt didn't restaint consumer throw her on the passenger side air bag didn't deploy and bent the steering.
Hit a pole in the front and the airbag did not deploy. Please describe.tt
Consumer was in an accident and driver side air bag did not deploy.tt
The air bag light remains illuminated, indicating malfunction exists within system.cause is unknown.please give further details.
Harness/straps on the integrated child seat did not lock into place. Van was taken to the dealership. Dealer stated that the entire seat would have to be replaced at owner's expense. *ml
Css integral seat, chest latch on css popped open when applied brakes real hard.
Electrical failure.
Airbag light came on, and horn/cruise control stopped working. Dealer determined clock spring assembly needed to be replaced.
My girl friend and i wher voming home from portland,meon themaine turnpikeand she started getting tiredso she pulls in to the next rest area and i took over driving . As i started to gain speed turning out of the rest areaon to the turnpike i felt the steering wheel catch upand i had to give the steering wheel a good jurk to get the steering wheel to streghten up . Then i heard a snapabd the air bag light came on and i lost my horn and cruise control.when we got homethe next day i took the air bag out for fear it might go off.
Clock sping is a wire harness located in the steering column that controls the driver side air bag, horn & cruise contol . When damaged from no fault on part of the driver the horn will not work the air bag will not deploy when needed or might deploy without any impact . I feel that this is a safty defect that should be repaired by the manufacturer at no cost to the consumer.
Vehicle has low rpm transmission has been replaced three separate times.the transmission shifts sporadically and stalls at lower rpms.tt
Vehicle stalls out while in motion.
While driving the engine cuts off and also the vehicle stalls without any warning. This happens while driving in hot weather and low speed.
Two spark plugs cross threaded/improperly gapped, causing engine to shake at idle.
Bolt failure of serpentine belt tensioner which resulted complete loss of all power/functions. Please describe details.tt
Consumer was driving when making a turn car cut off .tt
Distributor rotor failed.
While driving, vehicle will shut down with no warning. Corrections from dealers didn't change condition. Please describe details.tt
The vehicle stalls at any speed. Stalled at 55mph on a highway and almost caused a serious accident. Please describe.tt
At various levels of speed the vehicle will stall/die without hesitation.
During vehicle operation the vehicle stalls without warning. This has been a continuous problem and the dealer is unable to find the problem.
Poor spark plug cables. *sd
Vehicle stalled out with no warning.and rolled into house. Tt
While driving the vehicle the engine cuts off and the vehicle also stalls. This happens at low speed and hot weather.
Vehicle steering belt tensioner broke and lost all concerning controls.2nd occurance.(pe95-012).tt
The belt tensioner broke , there was a short in the electrical ignition and vehicle caught on fire. Please describe .
Vehicle stops without warning, problem will not duplicate for dealer.tt
Vehicle stalls out at anything, resulting in braking and steering ability loss.
Automatic transmission failed. Vehicle slips out of gear at high speed and then shift and sticks in first under 40 mph.several electrical problems mainly with ignition.ignition has been replaced several times.
Vehicles stalls out intermittently with no warning.tt
On rainy day while driving, vehicle stalls out when slowing down, resulting in steering and braking ability loss.
While driving, engine suddenly died without warning; loss all vehicle power; cause unknown; speed 35 to 40; curvey roads.tt
Coil ignition replaced.
Vehicle can be driven for about 5 minutes and than dies.tt
Intermittent computer failure.
Main computer module has blown out, causing the vehicle to die out. Will only stay running for couple of seconds. Dealer stated that main computer module is on national back order for at least 8 months or more.
Engine dies while driving, replaced computer chip module.tt
Computer failed.
Vehicle would just cut off while driving. All the power would cut completely off. Dealer replaced ignition switch.
The vehicle was in the park position in the garage area of the house,vehicle was sitting for one hour when the vehicle caught on firedue to a faulty starter, consumer has contacted the dealer.
Wire front intake manifold sensor looped down on brake line nut and vibrated, causing insulation to rub off, resulting in vehicle shorting out/stall. *skd
While driving smoke was coming fromdash and passenger's compartment.consumer tried to start car, and horn kept honking/ lights would go off at night, and brake sending wiring system burned up, and mixed up everything.
While parked vehicle started to smoke and then caught on fire.
Wiring harness caught fire.
The main concern is the transmission, not under warranty that cost $2500 to fix.the fusable link for the a/c actually burned, smoke was emitted (and also when the fan motor burned on the engine system).these are road hazards when the vehicle stops functioning with no warning.
While driving smoke was coming fromdash and passenger's compartment.consumer tried to start car, and horn kept honking/ lights would go off at night, and brake sending wiring system burned up, and mixed up everything.
Fuel leaked onto the exhaust pipe.*dtthe recalls weren't adequately covering the design flaw in the captured seal swivel joint in the fuel rail of the engine.*scc
The main concern is the transmission, not under warranty that cost $2500 to fix.the fusable link for the a/c actually burned, smoke was emitted (and also when the fan motor burned on the engine system).these are road hazards when the vehicle stops functioning with no warning.
Steering belt tensioner broke, loss of power steering and water pump.tt
When driving consumer noticed smoke coming fromengine comparment. Vehicle overheated. Consumer contacteddealer, dealer noted that electrical fanwent bad, causingvehicle to overheat, dealer replaced the fan. Please provide any further details.
Engine gasket failed, causing oil leak.
The belt tensioner was replaced five times keep falling off when raining,accelerates .tt
Throttle body gasket failed.
Repeated serpentine belt failures.vehicle is now on third belt.
The transmission failure nearly caused by wife to be in an accident trying to get the van to the side of the road.my understanding is these types of failures are common, though chrysler is not admitting it.in addition, the mounts holding the transmission in place also required replacement.previously the engine mount on the van failed.failure of the transmission and motor mounts pose a serious safety concern for riders of the vehicle.the other failures, though costly and time consuming to repair, did not seem to pose a major safety risk.
Consumer had replaced the belt tensioner a week ago its making the same noise that it make when the first tensioner broke .tt
Pulley that holds the tension for the belt snapped off.tt
Whi le driving consumer noticed that there was white smoke coming from underneath the hood and manifold pipe.vehicle smoked badly when it came to a complete stop.
Noticed noise, as if something was loose under vehicle; had vehicle checked; found belt tensioner loose; replaced.tt
Motor mount failed.
Motor mount replaced.
Oil leaking from engine, caused by failed valve covers.
Engine block stud snapped off, causing loss of power.
Defective head valve cover gasket and engine cylinder rear head gasket cause a major oil leak which may result ina fire if there is a source of ignition.please provide further information.
When coming to a stop the vehicle had to be placed in park so it wouldn't stall.the engine emitted smoke.*tc
While driving on the highway the bolt on the belt tensioner broke.please describe.tt
Van vibrate so bad, causing parts to fall off, vehicle hard to control, replace struts/axle/fix auto transmission and replaced it/pulley broke off the belt.tt
Bolt failure of serpentine belt tensioner which resulted complete loss of all power/functions. Please describe details.tt
You name it, it has broken.the rear wiper motor quit in the middle of use.when it rains and i turn right, the whole van just stops.right now, can't turn right without constant noise and jerking.have had the front axle replaced 4 times.something keeps tearing it up.i was told motor mounts, but that is expensive to replace.i was also told the engine, the transmssion, the wheels.i get different stories from each person.can't contact plymouth manufacturer.car stalls between gears then jerks into next gear.people at dodge place where i bought van are not nice, and won't even look at vehicle without charging 50.00.they overcharge for everything.wish the thing would blow up so i could get a different vehicle, and not lose so much money.many, many problems with this year make and model.know many people with exact problem.manufacturer needs to replace at his cost!!!i do not know all the names of exact components to place on questionnaire to give more help.i would be happy to discuss this case with anyone.
When ever turning around corners in venicle, the vehicle would stall or die out. It would occur sometimes in traffic. Took to dealer to check and could not find the problem.
While driving, the tensioner arm belt broke, causing the vehicle to lose power steering and brakes. Please describe details.
Engine failure.
Engine failure.
Intermittent stalling without warning when air conditioner is on.this happens very quickly, sometimes with foot on, sometimes with foot off the gas pedal.
While driving engine stalled, consumer took the vehicle to the dealer. Dealer said the throttle body was the main cause of the problem and so they cleaned it.after one week the engine stalled twice on two separate days while driving and it would not restart so the vehicle had to be towed. Possible engine problems.*yd
During vehicle operation the vehicle stalls without warning. This has been a continuous problem and the dealer is unable to find the problem.
Engine oil replaced frequently. *sd
The engine blew only 3 months after buying the vehicle.
Engine races and jerks at low speed.
While driving at various speeds, usually during times of deceleration engine will stall, causing shut down of all systems.this has occurred on the highway as well as during city driving.i have taken it to the dealer and all they tell me is it must do it while their monitoring it to troubleshoot it.
Our vehicles motor will shut off during rain or when the air conditioner is on. We have brought the vehicle to two dealerships and they can find nothing. Our neighbor has the same year with the same problem. This has created a very hazardous driving experience for my wife.
Vehicle stalls at low speeds especially when making left hand turns and when coming off a long interstate drive.nlm
Intermittent stalling. *sd
While the vehicle was parked in the garage a fire started in the engine compartment, resulting in the vehicle and the house burning out.please give any further details.
Vehicle stalls intermitently.very dangerous as it sometimes stalls while making left turns into traffic.serviced once by dealer - was ok for 6 months.
Motor would shake whenevervehicle has been started. Also,engine would burn oil excessively while driving.
Vehicle continually stalling which causes loss of power steering and braking ability, consumer replaced fuel filter, cleaned injectors and had a tune up without any improvement. *mjs
The engine blew only 3 months after buying the vehicle.
Vehicle loses power at deceleration.
While driving engine stalled, consumer took the vehicle to the dealer. Dealer said the throttle body was the main cause of the problem and so they cleaned it.after one week the engine stalled twice on two separate days while driving and it would not restart so the vehicle had to be towed. Possible engine problems.*yd
Intermittently while driving the van in rainy weather, it loses all power. This has happened 8 times in the last year and 6 months, mostly when making a right hand turn. On may 10, 1998, this happened while driving on the highway in heavy traffic with vehicles moving slowly due to heavy rain.the dealer has not been able to determine what causes this to happen.
Noisy drive belt.
Tensioner andserpentine beltbroke, loss of power steering.tt
While driving vehicle, came upon a stop sign, steering wheel locked up & lost steering control. Could not move steering wheel. Had vehicle towed to dealer & informed belt tensioner bent & large belt had fallen off.
Belt tensioner bracket failed. ( 2nd vehicle on 509690)
Serpentine belt tensioner cracked, causing belt to slip over pulley, resulting in loss of steering control/accident.
Belt tensioner broke and fell off, this makes the vehicle difficult to control.
Belt tensioner broke while driving, causing a loss of power steering, and overheating
The serpentine belt came off while driving because the belt and tensioner broke.nlm
While driving, serpentine belt tensioner failed, causing loss of power steering.tt
Transmission failed, serpentine belt failed, support rod to hatch failed causing injury to consumer when hatch fell on head.
Power steering problems.tt consumer was driving and heard a loud bang and lost power steering, tensioner blet had to be replaced, also consumer having problems with back latch on trunk.
Nhtsa recall 00v305000 concerning steering wheel separation. Consumer requesteda rebate in the amount of $242.98 for the steering wheel assembly repairs due to a recall.consumer was informed the vehicle was not covered under recall due to the vehicle identification number.. There were other problems with the vehicle such as a malfunctioned air condition, driver's seat, transmission, and a paint defect.
The motor on the rear windshield wiper failed.i have had numerous system failures on this vehicle, including transmission, air conditioning, rack and pinionsteering.most of the failures were within the first couple of years of ownership.most were not of the ordinary variety.
Air conditioner evaporator leak.
Replaced leaking a/c evaporator core.
Condensor coil on the air conditioner failed.
Airconditioner malfunctioned while driving.
Evaporator failed/leaked had to be replaced.according to a bulletin board on www.aircondition.com many others have had the same problem.
Oil leak at top head gasket area of compressor, causing air conditioner/defroster failure.*aw
Gasket for a/c wore out in 1995. In1996, compressor went out, and in 1997, condensorwent out. In1998, compressor went out once again. Then, condensor failedin 1998,and in july of 1999 , evaporator also went out.*ml
While drivingabs brake light came on. Went to apply brakes & had no brakes. Vehicle failed to stop right away. Took to dealer & mechanic replaced abs pump. Later, brakes failed again & took vehicle back. Brakes repaired once more. However, problem has reappeared. Dealership has gone out of business. The am/fm cassette stereo system also malfunctioned. In addition, sliding door never closed appropriately.
While jacking the vehicle upthe jack collapsed, barely missing the consumer. The manufacturer was contacted, and stated that jacks aren't to be used that much.
Third brake light inoperative due to bulb failing.
Headlight plastic is fogged reducing headlight distance and clarity.
Plastic on the headlights has started to fog up,reducing the amount of light that driver received through the lens.moisture found inside of lens. Dealer has been notified. *ml
1993 plymouth voyager brakes engaged while accelerating causing brakes to burn and get really hot. Upon inspection mechanic determined the master brake cylinder needed to be replaced. The consumer independent mechanic could not get a replacement master cylinder because the part had been recalled.the consumer could only have the replacement made at the dealer.the vehicle was taken to the dealer and the technician there said the recall was on the pressure piston not the master cylinder.any part damaged by the recalled part was the responsibility of the consumer.the dealer replaced the boost pressure transducer and actuator.they also replaced some recalled parts.when the vehicle was returned to the consumer she noticed that the vehicle mpg was reduced and that the brakes felt different.the vehicle was returned to the dealer several times for brake problems.eventually the dealer replaced the master cylinder and everything was fine for a while.the brakes light illuminated an the consumer had to apply excessive for to tthe brake pedal to get the vehicle to stop.to avoid the hassel withthe dealer the consuerm purchased another vehicle.
Poor engine performance. *sd
Strong smell of gasoline at stop(s). Owner inspection found intermittent fuel spray from fuel railjoint(front) near exhaust cross-over.dt
Fuel leaked onto the exhaust pipe.*dtthe recalls weren't adequately covering the design flaw in the captured seal swivel joint in the fuel rail of the engine.*scc
Gasoline leaks from fuel rail.nlm
Consumer states problem with fuel leakages from the underhood injection fuel rail o-ring, dealer and the manufacturer were notified at this time. Feel free to provide any further information.
C96v099000, campaign bulletin was for abs braking system, consumer was concerned because repairs were done, and he had no brakes,dealership charged consumer $217.21 for repair of a pump. Consumer stated that there was no problem with brakes, dealer replaced faulty accumulator.*yd
First fuel injector failed 07/14/99 and second failure occurred 12/30/2000.second failure included an injector as well as leaking fuel rail.
The left side of the gas tank hanger strap is cracked 3/4 of the way through and will fully fail shortly.this will result in the plastic gas tank dropping to the road.i feel this is a serious and hazardous condition.fire or other likely catistrophic failure will ensue.
A loud noise is heard when fuel tank is full but noise subsides as fuel is used up.yh
Driverunable to opendoor after closing.repairs made at dealer's shop at consumer's cost. Please feel free to provide any further details.
Side door comes open while vehicle is in motion. Please explain.tt
Went to the dealership to get the latch replaced after he recieved a letter from chrysler. Please describe.tt
Design of door locks not safe for passengers; can open door by pulling on handle without manually unlocking door.tt
Doors do not lock properly.they lock up from the outside & insidewhentryingto get out of vehicle. Dealer has not cooperated.has givenconsumer the run around to replace the part.
The sliding door does not latch properly or tighten enough.nlm
Defective passenger door is stuck which wont allow anyone enter or exit the vehicle on the passenger's side.please provide further information.
Sliding door isn't locking properly, and the bell keeps ringing that the door is open dealer can't determine the cause of the problem.
Driver's and passenger's side doors have the rubber worn offwhich makes it hard to close. Dealer has seen.
While drivingabs brake light came on. Went to apply brakes & had no brakes. Vehicle failed to stop right away. Took to dealer & mechanic replaced abs pump. Later, brakes failed again & took vehicle back. Brakes repaired once more. However, problem has reappeared. Dealership has gone out of business. The am/fm cassette stereo system also malfunctioned. In addition, sliding door never closed appropriately.
Owner has a complaint in reference the length of time chrysler has taken too long to repair the rear liftgate latch.
Received notice of recall on the rear lift gate latch, no repairs made due to inavailability of parts.
Received notice of recall on the rear lift gate latch, no repairs made due to inavailability of parts.
The defective liftgate bolts on the right cylinder sheared off, causing the liftgate to slam down and broke the back window. Also, resulted in injuries.
Structure,door assembly: recall #951001 .received recall notice in february for liftgate latch. Called to make an appointment and has called several times and can't get his vehicle repaired. Deal stated that he will call him when the parts are received.
Ea94-005 active, rear liftgate latch failure, when closing liftgate becomes veryhard to latch.tt
Received notice of recall on the rear lift gate latch, no repairs made due to inavailability of parts.
Structure, liftgate latch: received recall notice in feb. 1996, called to make an appointment for repairs, was told they would notify him when they could get to him. Has called several times since and still has not gotten his vehicle repaired.
Liftgate latch recall repairs refused due to lack of dealer notification.*aw
While driving and attempting to slow down, rear door clicks with warning light possible illuminating. Driver got out to reclose.tt
Rental vehicle, lost control of vehicle rolled over, rear latch liftgate came open.tt
Sometime the rear hatch latch light come on it hard too close.tt
While driving rear door latch failed, allowing stroller and other articles to fall out. This has happened more than once.tt
Rear hatch latch opened while driving, no impact involved, ea94-005 active.tt
Rear hatchback latch come open while driving.tt
Does not believe that putting a new improved latch is the solution.tt
Had a rear end collision, rear door popped open.tt
Rear liftgate opened up while driving.tt
When hit in the rear the rear latch broke and the tailgate flew up on impact. Please describe.tt
Rear hatch latch hard to close.tt
While traveling 65mph hood flew up and obstructed driver's view.hood/windshieldwaere damaged.parked vehicle in garage.
Due to the deterioration of bolts attached to liftgate, latch was loose which caused the bracket to fall on top of consumer's child, causing bodily injury.
Emergency parking brake released, causing accident.tt
Upon entering vehicle, foot accidentaly hits emergency brake pedal, releasing brakes.
Transmission failed.
Nhtsa recall 00v305000 concerning steering wheel separation. Consumer requesteda rebate in the amount of $242.98 for the steering wheel assembly repairs due to a recall.consumer was informed the vehicle was not covered under recall due to the vehicle identification number.. There were other problems with the vehicle such as a malfunctioned air condition, driver's seat, transmission, and a paint defect.
When driving on an incline the vehicle will roll backwards withfoot offthe brake, just like it were a stick shift. Dealer contacted and aware of the problem, replaced the transmission and the problem still exists.
The transmission went out at 10,000 miles. At 25,000.tt
Belt tensioner broke and fell off, this makes the vehicle difficult to control.
Transmission locked in 2nd gear.
Transmission stuck in first gear. Also snap ring and clutch plate pieces came off.
When vehicle won't go into reverse till its warmed up. When going forward between 2 and 3 gears, it won't shift into 3rduntil it's warmed up.
The motor on the rear windshield wiper failed.i have had numerous system failures on this vehicle, including transmission, air conditioning, rack and pinionsteering.most of the failures were within the first couple of years of ownership.most were not of the ordinary variety.
The housing for transmission developed a crack, causing the bolt tofall out and the whole transmission to drop. This happened while the vehicle was being driven, causing the vehicle to make awful noise. Transmission had to be rebuilt.chrysler refuses to take any responsibility because the van is out of warranty..et.
While driving vehicle on highway and trying to change lanes the vehicle becomes very sluggish, owner also notes that automatic transmission causes vehicle to jerk while waiting at light; also,transmissionsometimes gets stuck in gear.
Automatic transmission failure, transmission will shift out of gear.tt
Transmission failed. *sd
When driving at any speed the vehicle isn't shifting properly due to the transmission slipping and jerking, and vehicle hesitating.
Van vibrate so bad, causing parts to fall off, vehicle hard to control, replace struts/axle/fix auto transmission and replaced it/pulley broke off the belt.tt
You name it, it has broken.the rear wiper motor quit in the middle of use.when it rains and i turn right, the whole van just stops.right now, can't turn right without constant noise and jerking.have had the front axle replaced 4 times.something keeps tearing it up.i was told motor mounts, but that is expensive to replace.i was also told the engine, the transmssion, the wheels.i get different stories from each person.can't contact plymouth manufacturer.car stalls between gears then jerks into next gear.people at dodge place where i bought van are not nice, and won't even look at vehicle without charging 50.00.they overcharge for everything.wish the thing would blow up so i could get a different vehicle, and not lose so much money.many, many problems with this year make and model.know many people with exact problem.manufacturer needs to replace at his cost!!!i do not know all the names of exact components to place on questionnaire to give more help.i would be happy to discuss this case with anyone.
Vehicle has low rpm transmission has been replaced three separate times.the transmission shifts sporadically and stalls at lower rpms.tt
About every 30,000 miles transmissionwent out. Consumer's wife was petrified entering the beltway as vehicle gradually picked up speed. Transmission has already been replaced.
The main concern is the transmission, not under warranty that cost $2500 to fix.the fusable link for the a/c actually burned, smoke was emitted (and also when the fan motor burned on the engine system).these are road hazards when the vehicle stops functioning with no warning.
Power train-auto trans. After having the auto trans. Serviced, the trans. Goes out w/in 2000 miles.1st. Time in 1995 was covered by warranty. Because of this i was afraid to have it serviced thereafter, now for the 2nd time it happen w/in 1000 miles.
Auto-tran: transmission locked up in second gear; would not automatically change gears; vehicle in motion; no warning.
At approximately 44,000 milesautomatic transmissionhad to be replaced under a manufacturer's warranty.just recently, automatic transmission failed again while attempting to park.a private mechanic has examinedvehicle, and determined thattransmissionneeded to be replaced again with 91,000 total miles on vehicle.please provide any additional information/attachments.
Transmission overdrive failed. *sd
While driving up a ramp at 25mph the transmission blew. Will be taken vehicle to dealer.
Transmission will not go in reverse while engine still cold (approximately 10 minutes under normal conditions).intermittent in winter of 1998-99, increasing to chronic situation by summer of 1999.situations ranged from annoying (not able to back up at gas pump) to dangerous.wife and two children not able to get out of lane on fast, busy road where construction forced them out of lane (route 33 in greenland/portsmouth nh, in october, 1999).other transmission problems have been not shifting up from 2nd to third while cold (50,000 miles), and has always shifted loudly and with a thud.situations have become increasingly more dangerous, and we feel that automatic transmissions should last longer than a 36,000 mile warranty.thank you.
Automatic transmission failed. Vehicle slips out of gear at high speed and then shift and sticks in first under 40 mph.several electrical problems mainly with ignition.ignition has been replaced several times.
Driving down the road my van would not shift into gear unless i stepped on the gas peddle really hard, then every time i came to a stop it would do it again. It will start and go in gear now but it keeps doing the same thing.
Transmission blew out when going up on a ramp off the freeway at 50mph (18 nov 96). Taken vehicle to transmission shop for repairs. The 2nd time, had foot on pedal & vehicle did not go, then it suddenly accelerated.
Traveling about 40-50mph with cruise control on. Stepped on accelerator & nothing happened. Could hear the engine running. Vehicle started to slow down. Coasted to side of road. Had it towed. Was informed the transmission failed. This is the third (3) time this has happened. Chrysler paid for the first 2, but not for the 3rd one.
Transmission made noise/failed. *dsh
Transmission failed.
The transmission failure nearly caused by wife to be in an accident trying to get the van to the side of the road.my understanding is these types of failures are common, though chrysler is not admitting it.in addition, the mounts holding the transmission in place also required replacement.previously the engine mount on the van failed.failure of the transmission and motor mounts pose a serious safety concern for riders of the vehicle.the other failures, though costly and time consuming to repair, did not seem to pose a major safety risk.
Transmission failed, serpentine belt failed, support rod to hatch failed causing injury to consumer when hatch fell on head.
At 78,000 miles the transmision needs to be replaced .tt
Transmission leak.
Multiple transmission failures - three replacements.
Automatic transmission failure.
Received information from center for auto safety fact sheet about transmission problems with this vehicle. Have not been able to get any help from chrysler about recalls or warrenty. Is there a warrentyfor the transmission? should they be held liable when they knowingly sold vehichles with weak/faulty transmissions.
The vehicle jurked down the road and got stuck in first gear,vehicle had to be drivenin first gear to the destination.this happened because of the rear bearing broke down and caused the metal fillings to get into the trans axles.please describe detail.
Auto-tran: while driving, gear in drive, gear went into neutral on its own; could not shift to any forward gear; vehicle seemed slow shifting.tt
Transmission failure without prior warning.*tw
Vehicle experienced premature wear of the automatic transmission. Mjs
Transmission runs rough and shutters.
Transmission failed to shift properly; lost all gears.
The vehicle would not drive when put in gear.the transmission whines but the van will not move.when the van finally goes into gear it will not shift, it sticks in gears.the brake pedal is soft and goes to the floor, but will not stop quickly in an emergency.the original paint is also peeling to bare metal and is rusting, the clear coat is bubbling and the paint is starting to peel on the hood.
Transmission failure.
While driving at 45 mph, stopped at a light.when pulling out vehicle got stuck in first gear, and vehicle would only drive at 10mph to 15 mph.took vehicle todealer, and the dealer can't determine the cause of the problem.
While driving stopped and parked truck. Got out of the truck and the door hit the driver,knocking driver to the ground because the vehicle shifted into reverse while being in park position. This has happened 3 times.took truck to dealer and they have not found anything wrong with the truck.
Consumerexperience problems with the gears shifting if the vehicle is not warmed up.the 1 and 2 gears will stick whenattempting to drive if the enigine is cold. Dealer has not been contacted.
Transmission failed. *dh
Transmission makes a chirping noise.
Transmission failure. *dh
While driving the vehicle down the highway heard a loud noise and then saw smoke coming from the vehicle.a gear blew out of the transmission, and had to pull over to the side of the highway and had to be towed.
Transmission failed, causing vehicle to slip and lock into 2nd gear.*skd
Premature transmission failure.
When starting the vehicle & it would not goout of first gear. Repair shop recommended turning the van off to reset the fail stop.
Would shift into reverse and vehicle would start to shake, but not back up. Would shift into drive and vehicle acts very erratic. Would barely move forward. Taking vehicle to dealership to check out transmission.
Transmission failure on several occasions.
Transmission failed.
The first transmission trouble begin by not going in drive, thistransmission was covered by our extended warranty, was replaced in march 1997, the second transmission began to have trouble in november of 1998.the second transmission has not been replaced as of yet.also the rear wiper motor no longer works and you can only purchase a new motor from a dealer.
Auto-transmission; owners heard loud noise w/vehicle no longer responding to acceleration.tt
Transmission failure.
The transmission is faulty. When stopping the vehicle it jumps forward and it shifts very hard. Please describe.tt
Transmission has failed 3 times;the first time at 55,000 miles, the second time at 62,000 miles, andthe last time at 99,000 miles.
While driving, transmission goes into neutral, will not go up a hill.tt
Failure of the transmission consumer was driving and the transmission went.tt
At 78,000 miles the transmision needs to be replaced .tt
Transmission problems began at 3800 miles. These included: engine racing,kicking, hard shifts, erratic shifting, jerking, harsh upshifts and downshifts, all on intermittent basis. Several visits to dealership were futile,we were told we didn't know how to drive and that the transmission needs to "adjust".original transmission failed on 7/11/96 while entire family was on board travelling on freeway.dealership rebuilt trans. Vehicle worked well for awhile buteventually started having "spells" of rough shifting .problems escalated and we tried a different dealership for service.they replaced the throttle position sensor twice in one month, last time on11/8/99. Transmission continued erratic performance.harshness ofdownshifts had become bad enough for seat belts to restrain passengers.engine would go past 4000rpm before shifting. Sometimes turning or going over a bump would set transmission "off". Independent mechanic suggested new transmission controller, that was installed 10/4/00. Transmission performance has not improved.trans. Still sticks, bucks, and jerks.this is a well-maintained vehicle that has undergone all scheduled maintenance since purchase.this vehicle carries a family of seven.we do not trust this vehicle enough lately to venture too far from home.chrysler and its local dealership close their ears and wait for us to go away.
Automatic transmission failure.
The transmission went out 3 times with 121,000. Dealer has replaced transmission.
The transmission failed.
Consumerwas travelingat 60mph and the abs brake system didn't wok at all. Whenapplyingbrake the pedal, itwent all the way to the floor. Also,consumer has a transmission leak, and the dealership is aware of the problem.
Transmission leak.
Transmission would not shift.
The gear shift indicator defective when in drive the truck said its in neutral .tt
Tranmission shift linkage replaced. *sd
Transmission torque convertor failed. *sd
You name it, it has broken.the rear wiper motor quit in the middle of use.when it rains and i turn right, the whole van just stops.right now, can't turn right without constant noise and jerking.have had the front axle replaced 4 times.something keeps tearing it up.i was told motor mounts, but that is expensive to replace.i was also told the engine, the transmssion, the wheels.i get different stories from each person.can't contact plymouth manufacturer.car stalls between gears then jerks into next gear.people at dodge place where i bought van are not nice, and won't even look at vehicle without charging 50.00.they overcharge for everything.wish the thing would blow up so i could get a different vehicle, and not lose so much money.many, many problems with this year make and model.know many people with exact problem.manufacturer needs to replace at his cost!!!i do not know all the names of exact components to place on questionnaire to give more help.i would be happy to discuss this case with anyone.
While driving vehicle on highway heard a noise and the left front axle fell off.
While getting the abs brakes repaired mechanic spotted that the axle assembly cracked.manufacturer'srecall ch8270was issued on axle assembly for this make/model and year.but this vehicle was not included due to vin.
#1: anti-lock brake light began intermittently to turn on. Brake pedal operation "feel" would change significantly. For a 30,000 mile sequence maintenance check-up after 60,000 miles was reached at the dealer. The problems of the brakes were reported. The service shop adised the brakes were checked, and found to be okay. Within a few days, the same problems appeared. The minivan was returned to the service department. This time they indicated, which they did not earlier, that there was a recall on the abs system (of which i was never notified) and the repairs would be made for free. Soon after, the same problems occurred. The vehicule was returned again to the same dealer service shop, the brakes inspected, and was told that the problem was related to a crack in a timing device attached to the front axle, and it could be replaced only by replacing the axle, involving over $800 charge. I refused the service, but was charged over $40 for "brake inspection". I am very upset with how this has been handled. Problem #2.after a passenger got out of the minivan from the front right seat, he shut the door and it did not latch. The problem was traced to the door weld to the car frame had failed. This appears to be a potential safety problem, and the service department advised that there had been several similar cases. However, chrysler refused to agree that the weld was a manufacturing defect and would not pay, in whole or in part, the cost of the repair. #3. A disagreeable odor is coming out of the airconditioning ducts, most strongly upon the first few minutes of operation. The service center claims that all they can do is mask the smell temporarily but it will come back. They have seen this with other vehicles as well. I am concerned if the source of the odor may represent harm to the health of the passengers.
Van vibrate so bad, causing parts to fall off, vehicle hard to control, replace struts/axle/fix auto transmission and replaced it/pulley broke off the belt.tt
Transaxle failure.
Axle seal replaced.
Clutch failed. *tw
Front cv boots failed, emitting burning smell/weired sound.
Transmission differential is leaking oil.
Vehicle won't move when put into reverse gear, also transmission locked in 2nd gear/shifts roughly.
Vehicle's manual transmission failure, dealer had to replace gear shift housing, and shift rod detent spring.
Transmission shifts rough, won't go backwards when put in reverse sometimes, has been worked on threetimes in on year and still does the same thing.
Transmission failed.
Driver's and passenger's power seat belt lock up on track.
Owner states that the seat belt in the middle rear comes out of the floor.she also notes that dealers have repaired the problem but it returned.owner is very concerned about her childeren riding in this vehicle.
The seat belt detaches from the floor anchor.
Vehicle's middle seat belt spring clip moves while in use and seat belt falls off.
Drivers seat belt fails to extend, and must move seat belt adjuster on side panel in order for seat belt to move.tt
When slamming on brakes, the automatic seat belt on center bench seat on the passenger 's side, came out of the floor.
Seat belt anchor hook, the middle right hand seat belt clip come unattached when fastened.
Seat belt anchorage failure, the middle seat on right side, the hook clip cameloose upon impact, causing injury to child.
Motorizedseat belt on the right side in the middle of the vehicle disengages from the metal floor anchor,causing the seat belt to become inoperative. The spring clip did break and was replaced by the dealer with the same clip.please give any further details.
Middle seat belt anchorage no longer remains secure.system will unlatch with children using it. Please describe details.
Seat belt in middle rear seat did not restrain passenger when vehicle was rear ended.
Recall 97v149000; ms. Daniels call faricy boys to set an appointment to go to get the vehicle repaired for the recall,and she was toldthat the parts were there in stock.when ms. Daniels took the vehicle into the shop 3 hours later, ms. Daniels called the dealership and they said that they used the parts to repair someone elses vehicle.
When putting on or adjusting seat belt, the center seat/right side seat belt anchorage releases. Dealer has not looked at vehicle for problem.
While drivng center seat/right side seat belt spring clip broke, causing the seat belt anchorage to release when belt was being used.
While driving, the driver's side automatic seat belt releases from the belt buckle.
No summary listed for above vehicle.
While getting in rear middle seat seat belt would come unhooked or detached from floor. Problem occurs while driving vehicle; when css in middle would come unlatch; would swing from attachment; would not restrain css. Will be taken to dealer.
While getting in/out of seat belt, latch would not work properly.seat in middle where hook is attached to floor would unhook, causing problem for driver.
Middle passenger's seat belt does not stay attached to the floor.
The hook disconnected from the seat belt anchor that's located on the second row right side on the floor.please describe details.
Ea97005, safety belt anchorage failure. Safety belt anchorage releases frequently when belt is in use. Vehicle purchased in fall of 92. The spring clip is not broken.dealer has not looked at problem.
Seat belt in center seat separates from floor. *dh
The seatbelts on both the driver's and passenger's side stick.actually, the passenger seat belt will not even budge to get on.the driver's sometimes will and sometimes won't work.
Ea97005, safety blet anchroage failure. Safety belt anchorage releases frequently when belt is in use. Vehicle purchased in nov of 92. The spring clip is not broken.dealer is aware of problem.
The outerboard seatbelt anchor comes out when the sliding door is opened. Please describe.tt
Driver's side seat belt failed.
For the past 6 months, the driver's seatbelt will lock so you can't pull it far enough to put on. It will lock sometimes as far as 24 away from the place where it comes out from or not budge at all.this has happened so many times i can't even count.it has started to happen on the passenger's side too.(within the past month -- oct]there have been many times i couldn't even put on the belt due to it locking up.this has been true for any passenger in the front seat too.
The driver's seatbelt jams in and won't come out.nlm
Consumer states that the front lap and shoulder belts on the driver's side are inoperable. Consumer is also experiencing a problem with the sliding door.
When vehicle was involved in an accident and daughter was buckled in the first bench seat towards sliding door, safety belt became undone from the floor position, seat belt was still buckled and child was thrown from the seat.
Had child placed in seat,seat belt came unhooked, rehooked belt and it came loose again. Ea- 97-005.
Center seat/right side safety belt anchorage releases when the belt is attached to the floor and in use.
Seatbelts from the middle bench seat anchor detaches from the floor.
Seat belt from middle row/right side bench seat becomes detached from floor anchor by itself. Consumer feels it detaches when there is strain being put on seat belt, such as turning a corner.
While driving the center seat/right side seat belt anchorage releases when belt is in use.
Consumer has tried over and over to make seat belt work, belt has been a problem since 1995.
The seat belt on the right side in the middle of the vehicle hook disengages from the metal floor anchor.
Seat belt sticks inside buckle. *sd
The center seat/right side seat belt anchorage releases when belt is being used.
Middle seat belt is coming detached from the floor attachment. Ea97-005 investigation.
Drivers seat belt jams intermittently. *dh
Ea97005, safety belt anchorage failure; safety belt anchor releases frequently when the belt is in use. Vehicle purchased in oct of 92. The spring clip is not broken. Dealer has not looked at vehicle.
While driving, the center seat/right side seat belt anchorage releases when belt is being used.dealer has not looked at vehicle for problem.
Center seat/right side safety belt anchorage releases frequently when the belt is in use.
Seat belt failed, not able to extend of pull to close. Mjs
Second row seat belt, where it attaches to floor,will not stay connected.
The outerboard seatbelt anchor comes out when the sliding door is opened. Please describe.tt
Dealership refused to send a mechanic to repair 3 recall notices, including recall 99v113000/ air bag failure; recall 97v148000/ seat belt failure, and 96v099ooo/ abs brake failure.authorized another mechanic to perform work to repairrecall, or provideconsumer withnecessary parts to repair the defects.consumer was informed thatdealership wasunder no obligation to perform these functions. The consumer had asked the manufacturer for assistance in repairing the steering wheel, the windshield wiper pivot and lift gate supprt bolts, because theparts were defective, but the manufacturer refused to help.
Seat belt anchorage failure, the middle seat on the right, the anchorage hook clip moves from side to side andcomes a loose from floor anchorage when driving or seat belt is in use.
The seat belt hook on the right side in the middle of the vehicle often disengages from the metal floor anchor. The spring clip is not broken but does not remain in position. Consumer has not taken the vehicle to the dealer.
Ea-97-005, safety belt anchorage failure. Safety belt anchorage releases frequently when belt is in use. Purchased vehicle in aug of 92. The spring clip is not broken.dealer has not looked at problem.
Passenger side seat belt anchor attachment will detach from floor very easy. Please describe details.tt
Driver and back of driver seat belts pops open after their fastened.tt
Vehicle seat belts do not latch properly.tt
Consumer states that the pax front and 2nd row center safety belts unbuckle frequently while driving. Ts
Seat belt clip for middle seat lost tension due to being stepped on repeatedly, resulting in seat belt buckle detaching without warning. *dsh
Seat belt will not pull out at all on passagers side.
Middle seat passenger side seat belt buckle is not secure when locked. Talked to dealer and he said that the clips are bad,but no repair work was done yet.
Driver side seat belt locked up. Eat belt can not be used. The dealer has been contacted.
Seat belt attachment comes loose.
Shoulder harness/lap seat belt does not latch for occupant protection when driving. Please describe details.tt
Failure on the driver side seat belt retrctor, seat belt will not retract, failure on the passenger side seat belt, belt come out the buckle.
When vehicle was involved in an accident and daughter was buckled in the first bench seat towards sliding door, safety belt became undone from the floor position, seat belt was still buckled and child was thrown from the seat.
Middle seat belt buckle detaches from the floor attachment.
The driver's side seat belt comes unlatched for no apparent reason. The buckle has not been looked at by dealer.
While driving a deer ranout on the highway. Consumer slammed on brakes and skidded completely around in the road.when finally stopping consumer noticed that seat belt cam eunfastned and layed across driver'sstomach.driver'shead/neck, and back was hurting. Went to the hospital, and was toldshe had whiplash.
Middle seat on the bench seat, belt buckle comes unlatched.
Failure on the driver side seat belt retrctor, seat belt will not retract, failure on the passenger side seat belt, belt come out the buckle.
Seatbelt buckles come loose when something is bumped against it.consumer called dealer, and they stated it was a manufacturer's defect.
Whenever bumping into seat belt buckleseat belt will come loose at any given time, no matter how hard or softconsumer hits it.
Driver seatbelt locking mechanism does not unlock.tt
Behind driver seat in rear, rear seat belt mechanism does not lock or catch, will make a clicking sound, but does not stay locked or will not lock.
Front passenger's seatbelt will not pull out.
Shoulder belts would not release from retractor to allow driver to lock mechanism; took to mechanic; had no parts; was informed parts available at manufacturer, but back order.
Seat belt locks up to the point of preventing free movement/difficult to put on. *sd
The passenger's seat belt does not retract while in use, which in event of an accidentwill not hold the occupant.dealer said needs to replace seat belt system.please provide details and vin.
Driver's side seat belt retracted and locked up. Please describe details.tt
Poor performance on the passenger side seat belt.tt
The driver's shoulder belt wouldn'trelease for use . Please describe .
Drivers side seat belt did not restrain when vehicle was involved in an accident.tt
Van was in an accident the front driver side seat belt didn't restaint consumer throw her on the passenger side air bag didn't deploy and bent the steering.
Was struck from behind on the highway and child was ejected from the vehicle onto the highway child was buckled into shoulder harness.tt
Poor performance on the passenger side seat belt.tt
The built in child seat came undone in a sudden stop. Please explain.tt
The seat belt restraint on the integrated css fails, the upper portion of the harness comes loose causing the shoulders to be freed from restrant.tt
My son was in a 1993 plymouth voyager that left the road and rolled six times.i believe he had his seatbelt on, but that it failed him.he was ejected from the vehicle and died four days later.
The second seat right hand side unhooks from the anchor and it is unsafe but to someone in the seat belt.
Seats off center from steering wheel. *dh
Nhtsa recall 00v305000 concerning steering wheel separation. Consumer requesteda rebate in the amount of $242.98 for the steering wheel assembly repairs due to a recall.consumer was informed the vehicle was not covered under recall due to the vehicle identification number.. There were other problems with the vehicle such as a malfunctioned air condition, driver's seat, transmission, and a paint defect.
Driver seat failing, passenger front seat failed not usable for seat belt retraints, will not maintain upright position for seat retraints to fasten properly, cannot use passenger right front seat side, will not be able to use driver seat side very soon!
Anchors that hold rear seat are not strong enough to hold seat, seat moves around.tt
While driving 60mph driver seat collapse, due to the bolt falling out.tt
Ea97-005, safety belt anchorage failure. Safety belt anchorage releases frequently when belt is in use. Vehicle purchased vehicle in june of 93. The spring clip is not broken.dealer has not looked at problem.
#ea97005, safety belt achorage failure, safety belt achorage releases frequenty when belt is in use. Vehicle will be seen by dealernext week.
Right seat railhas a 1/8 inch thick steel runner that has fractured,causingthe seatback to be in a lopsided position, andresulting in severe back and muscle strain.
Seatback support bends and continues to bens backwards.
Drivers seat back angled slightly to side.
Driver's seat rachet failed. *sd
Hit from behind; pushed across road into telephone pole; occupants were pushed forward; went backwards; front seats collapsed; vehicle totaled.tt
While driving seatback collasped due to the main brace breaking in half.
While driving seatback collasped due to the main brace breaking in half.
Driver seatback failed completely to the rear. Seat back had over time progressively tilted further rearward, and adjustment was not possible to compensate. The right-most rail connected to the adjusting ratchet is cleanly broken, as if hacksawed. It likely was slowly cracking, resulting in the seat back tilting further rear-ward over several months. The metal crack itself is near a protrusion in the rail itself, about halfway towards the front, obviously a weak point (but normal usage?). A cursory web search found about a half-dozen similar incidents. I plan to contact the dealer/zone rep asap; this is clearly not a normal wear and tear issue. Thanks.
Reclining portion of driver's seatback rest cannot be placed in stable position; what looks like a panel, cracked in half; causes difficulty driving.
While driving 45 mph the seatback broke, causing the back of seat to fall backwards which almost caused an accident.seatback repaired by dealer with a $50 deductible.also, tab sticks out of seat belt adjuster that could injure a passenger.
Driver side seatbackcollapsed, causing seat to go into a reclining position. Consumer has yet to contact the dealer. Please provide any further details.
Drivers side seat slides back on tracks while driving.
Driver's seat latch failed, causing seat to move while driving, resulting in loss of control.*skd
Consumer was sitting at a red light when a truck rearendedthe consumer's vehicle, causing seat to reclinebackward, resulting in the consumerlosing contactwith the brakes pedal.thevehicle rolled out intothe intersection, but was able to pull himself up and get control of the vehicle. Consumer has contacted the dealer. Please provide any further details.
Consumer was sitting at a red light when a truck hit vehicle, causing the front seat to reclinebackward s, resulting in loss of control and vehicle rolled intoanintersection. Consumer was able to pull himself up and get control of the vehicle.contact dealer and manufacturered.
While backing out of driveway the driver's side seatback broke.vehicle will be taken to dealership this weekend.
The contact owns a 1993 plymouth voyager. The vehicle was included in the recall under nhtsa campaign id number: 96v099000 (service brakes, hydraulic:antilock). The vehicle was taken to the dealer for repairs where the technician advised the contact that in order to perform the recall repairs, the contact would have to have the abs hydraulic control unit replaced first. The technician stated the abs hydraulic control unit was not covered under the recall. The contact stated the recall summary indicated that the abs hydraulic control unit could experience wear as a result of the defective component. The contact stated that the repair should have been covered under the recall.the vehicle was not repaired. The approximate failure mileage was 189,556.updated 10/16/12*ljupdated 10/23/2012
My wife was backing the plymouth minivan when the abs brake system failed. The brake pedal was rockhard and both the abs and regular brake light were lit. The system failed again when the tow truck came to assist her. The vehicle was eventually moved to russ darrow chrysler plymouth of madison for repair.they could not duplicate the failure and would not replace the system withouta duplicated failure.we were told "we would have to drive it until the brakes failed again and then bring it back and they could fix it".when we complained and refused to take the vechicle they said that chrysler would not authorize the replacement of the system with a documented failure in thier tests.i contacted daimler chrysler at 800-853-1403 to register my request that the system be replaced and stated that we would not drive the vehicle as it was unsafewith another potential failure.contacts there include dave pearl2-1-99; tina 2-2-99;ron dandy 2-9-99 &2-10-99. Were told chrysler would not replace the abseven though there was an extented warranty because of recall #685.
1993 plymouth voyager brakes engaged while accelerating causing brakes to burn and get really hot. Upon inspection mechanic determined the master brake cylinder needed to be replaced. The consumer independent mechanic could not get a replacement master cylinder because the part had been recalled.the consumer could only have the replacement made at the dealer.the vehicle was taken to the dealer and the technician there said the recall was on the pressure piston not the master cylinder.any part damaged by the recalled part was the responsibility of the consumer.the dealer replaced the boost pressure transducer and actuator.they also replaced some recalled parts.when the vehicle was returned to the consumer she noticed that the vehicle mpg was reduced and that the brakes felt different.the vehicle was returned to the dealer several times for brake problems.eventually the dealer replaced the master cylinder and everything was fine for a while.the brakes light illuminated an the consumer had to apply excessive for to tthe brake pedal to get the vehicle to stop.to avoid the hassel withthe dealer the consuerm purchased another vehicle.
The contact owns a 1993 plymouth voyager. The vehicle was taken to the dealer for repairs under nhtsa campaign id number: 96v099000 (service brakes, hydraulic:antilock) repairs.ten months after the repairs were made the contact noticed that the brake and abs warning lights were illuminated on the dash board. The contact stated that the brake pedal became stiff. The contact inspected the vehicle and noticed brake fluid was leaking. The vehicle was taken to the dealer where the technicians stated the anti lock break system pump needed to be replaced. The manufacturer was contacted and stated they would not cover the costs of repairs. The vehicle was not repaired. The approximate failure mileage was 180,000.
The contact owns a 1993 plymouth voyager.while driving 55 mph in the snow, the brakes failed.the vehicle was taken to a mechanic and they discovered nhtsa campaign id number 96v099000 (service brakes, hydraulic:antilock).chrysler refused to acknowledge the recall and repair the vehicle.the vehicle has not been repaired.the contact felt that the vehicle was very unsafe because the brakes could fail while driving.the current and failure mileages were 140,000.
I was driving in granite city about 1 1/2 hours from centralia my town when the abs and emergency brake lights came on and my brake pedal got very stiff and i can barley stop. This has not gone away! i took the van to the mechanic and he said it was the brake (power brake booster and master cylinder) i have called auto stores to get the part but they tell me they cant even get the parts i need to get this fixed! i have to drive my van like this because i have no other vehicle and i have a husband and 3 children that i take to work and school every day. The mechanic told me the brakes can go completely out at any time and i will wreck!! what do i do?.
I had the abs repaired on a recall. Since the recall i have had problems with the system. The lite continuosly goes on and the brakes would go from abs to manual several times on ice and rain. Since the weather warmed the brakes seem to work better and the abs lite quit coming on but brake fluid runs out the fill resavoir when the vehicle is parked. Is there a connection with the hydraulics and the parts that were replace with the recall?
Abs brake light comes on and the brakes are gone. This has happened several times on dry surfaces.
- the contactcomplaineds because chris leith dodge failed to correcttheb rake problem. The brakes failed to stop the vehicle properly, the vehicle came to a rolling stop while almost standing on the brake pedal after taking the vehicle to them on four separate occasions.
Had rotors replaced by another dealer. Received notice (396v09900). Took vehicle in after calling different dealer. Was informed rotors not replaced but resurfaced. Nothing was wrong. Dealer has vehicle.
The entire brake system on the mini van is unsafe to all.
Abs braking system problems.please describe.tt
Abs, brake failure loss of brake fluid, bendix ten modulator leaking fluid at solenoid plate.tt
While driving experience totalled brake failure, replace pump, again light came on and brake failed, replace hydraulic assembly.tt
In dry weather went to apply the brakes there was no brakes,have abs anti-lockbrakes,dealer replaced the pistonand the pump .
Ea94-028 active, abs brake failure, pump replacement, lights came on yellow and red.tt
Antilock brakes computer module/pump failed, causing brakes to fail. *dh
Brake and abs light came on.then,brakes started to fail.consumer almost went through a intersection.consumer felt car should becovered underrecall.
Abs, brake failure extended stopping distance impact 12:00 position speed 50mph ea94-028 active.tt
Abs: applied brakes, 2nd time; brakes locked up; vehilce slid; hit by another; vehicle totaled.tt
Abs/brake lights came on, brakes started to smoke. Also replacement of anti lock- brakes on three different occasions.tt
Anti-lock brakes failed, also abs warning light comes on.
The vehicles abs system has had to be replaced.tt
While driving smoke was coming fromdash and passenger's compartment.consumer tried to start car, and horn kept honking/ lights would go off at night, and brake sending wiring system burned up, and mixed up everything.
Abs braking problems.please describe.tt
Consumer received recall 96v099 repairs however, abs and brake light have become illuminated on several different occasions, total brake failure has occurred twice, on both occasions, the brake pedal pushed to the halfway position where it met resistance, however there was no braking power.
Abs brakes failure, replaced the abs system.tt
Abs: wheels lock up when brakes are applied; especially during wet weather; pedal goes to floor; no warning.tt
Anti-lock brakes: when driving at a slow speed or slowing down for a traffic light the brakes will make a noise, and putting pedal completely to the floor and the brakes will not engage.
The front/rear brakes wore out prematurely.dealership repaired the problem.
Abs: brakes very hard, soft, sometimes spongy; intermittent increase in braking; funny noises; anti lock brake light comes on intermittenly, sometimes remain on
After the dealership replaced the abs pump and motor as stated in the abs recall 96v0999000 the parts didn't work.this occurred because the dealership failed to plug the relay in properly, which caused damage to the terminal.
Contacted dealer in reference tonhtsa recall 96v099000/ manufacturer's recall number 685 concerning abs brakes.no partswere available to correct recall problem. Please give any further details.
Recall # 96v099000 mfr #685 : consumer contacted the dealer to have recall work corrected. Vehicle was tested, no parts were replaced. Consumer laterexperienced problems with complete loss of braking ability, resulting in a near accident. Please provide any further details.
Braking system malfunctioned, causing no braking ability at allwhich may result in a crash.please provdie further information and vin#.
Noisy abs anti-lock brakes.
Whenabs light come onand brakes were applied, would have no brakes.power inbrakes would decrease.problem was intermittent. Took to dealership numerous times for brake repairs. Vehicle was test driven, but nothing could be found.
Consumer contacteddealer in reference to recall96v099000/manufacturer's recall 685/ abs brakes.dealer corrected the problem.however,abs light has been illuminating on the dash. Also,upon making a normal stop vehicle is very difficult to stop, causing extended stopping distance. Please provide any further details.
Notice abs light on, then experience long stopping distance, dealer said abs pump failed, replace.tt
Brake failure.occassionaly brake warning light comes on.
Abs, brake failure in for replacement of pump assembly, experience extended stopping distance, ea94-028 active.tt
Consumer took vehicle to dealer on 01/07/03 for recall remedy 96v099000.on 01/08/03 dealer informed consumer they would not perform recall remedy unless consumer agreed to $1100 worth of additional brake work.dealer advised that consumer had foreign matter in brake lines.consumer then contacted manufacturer who sided with the dealership. Ts*dt
Abs, ea94-028 active, in for repair, brake failure rotors failed vibration in front, extended stopping distance.tt
Abs brakes failed at 30 mph.tt____________________________|brakes failed at 30 mph.tt
Experienced brake lock-up while attempting to stop.
Brakes continued to fail even though the vehicle was serviced since itwas purchased. Consumer stated the vehicle has been parked.
The vehicle had a campaign bulletin 96v099000 to fix the abs.the pump was replaced six times, however the problem continued.
Abs system failure, abs indicators turned on, partial loss of braking.tt
Anti lock system main hydaulic pump unit failed. Causing a loss of control.tt
Abs brakes; indicates rotors turned repeatedly w/erratic braking. Please describe details.tt
While drivingabs brake light came on. Went to apply brakes & had no brakes. Vehicle failed to stop right away. Took to dealer & mechanic replaced abs pump. Later, brakes failed again & took vehicle back. Brakes repaired once more. However, problem has reappeared. Dealership has gone out of business. The am/fm cassette stereo system also malfunctioned. In addition, sliding door never closed appropriately.
While driving out of driveway stepped on brake pedal to stop, butvehicle did not stop and crashed into another vehicle .then, took vehicle to dealer, and dealer could not find what was wrong. Consumer had experienced two other repairs onbrakes,second time abs pump had to replaced . Currently, dealer's techinician saidit was pump accumulator.
Abs light came on, brake system failed, replace ecu/abs module.tt
Mfr# 685 & nhtsa# 96 v 099 000/anti skid system:consumer states repeatedproblems with premature wear of front brakes. The dealer, nelson darwoo, chrysler dealer in council bluffs, ia.phone# 712/388-0363.has repaired the vehicle on several occasions under the recall and the problem is still occurring.feel free to provide any further information.*mr
#1: anti-lock brake light began intermittently to turn on. Brake pedal operation "feel" would change significantly. For a 30,000 mile sequence maintenance check-up after 60,000 miles was reached at the dealer. The problems of the brakes were reported. The service shop adised the brakes were checked, and found to be okay. Within a few days, the same problems appeared. The minivan was returned to the service department. This time they indicated, which they did not earlier, that there was a recall on the abs system (of which i was never notified) and the repairs would be made for free. Soon after, the same problems occurred. The vehicule was returned again to the same dealer service shop, the brakes inspected, and was told that the problem was related to a crack in a timing device attached to the front axle, and it could be replaced only by replacing the axle, involving over $800 charge. I refused the service, but was charged over $40 for "brake inspection". I am very upset with how this has been handled. Problem #2.after a passenger got out of the minivan from the front right seat, he shut the door and it did not latch. The problem was traced to the door weld to the car frame had failed. This appears to be a potential safety problem, and the service department advised that there had been several similar cases. However, chrysler refused to agree that the weld was a manufacturing defect and would not pay, in whole or in part, the cost of the repair. #3. A disagreeable odor is coming out of the airconditioning ducts, most strongly upon the first few minutes of operation. The service center claims that all they can do is mask the smell temporarily but it will come back. They have seen this with other vehicles as well. I am concerned if the source of the odor may represent harm to the health of the passengers.
Abs system failure.tt
Nhtsrecall 96 v 099 000/manufacturer's recall 685 concerning anti skid brake system:abs pump has been replaced three times since recall repairs, and the problem still occurring. Vehicle at dealer for another replacement. Feel free to provide any further information.
When applying the brakes they go all the way to the floor and the brakes light has been staying on. The system has abs. The happens on normal road conditions.
While driving vehicle the brakes failed, no accident orinjuries.
Brakes are really spongy.if another driver stops in front of consumer's vehicle,brakes will hardly work.it takes too long to brake, so in an emergency, brakes may not perform properly.
Abs brake system failed.
Anti-lock brakes;pulled out of the parking space and the car would not stop.
Failure of dual function pressure switch, resulting in loss of brake power without warning.this is one of many brake problems owner has experienced with this vehicle.dealer has repaired the vehicle. *ml
When applying the brakes the pedal was extremely difficult to push down and vehicle would not stop. Dealer ordered abs pump.
Abs brakes failed twice at high speed, also abs light came on and brakes went.tt
On june 2, brake system failuled , resulting in a near crash on dry road in fair weather.the driver stopped the vehicle by combination of downshifting, application of emergency brake and shifting into park position, just before a crash would have occurred.on june 4, jones chrysler dealer (bel air, md) diagnosed problem as "low accumulator fault caused by faulty dual function pressure switch."service rep. (dennis) stated:(1) vehicle master cylinder was full of brake fluid and functions properly; (2) the brake pump did not cause the problem, and there is adequate hydraulic pressure in system; (3) the faulty pressure switch shuts down the brake system because it erroneously reads low hydraulic pressure although there is actually adequate pressure; (4) the switch fails only intermittently, hence the brake system may work properly for a period of time before the switch could fail again without warning; (5) the reason the faulty switch shuts down the brake system is due to system design, and there is no way for the mechanical/hydraulic system to engage the brakes when the switch erroneously reads low pressure; and (6) chrysler will not pay for repair because it is a faulty electronic switch, rather chrysler will pay only for mechanical pump (hydraulic) problems.i authorized the repair to be completed and will call chrysler customer assistance "800" line tomorrow to request that chrysler reimburse me.my complaint is summarized as follows. The design of the system allows a faulty electronic reading to cause an electronic switch to shut down the mechanical/hydraulic functioning of the brake system, thus rendering the vehicle operator unable stop the vehicle by ordinary means, and causing a life-threatening situation to occur.this is unacceptable by any engineering safety standards.chrysler should (1) reimburse me for switch replacement, (2) correct the design flaw, and (3) install an improved system at chrysler's expense.
Abs system brake failure, power steering belt tensioner fractured.tt
Antilock brake system failed prior to recall. *dh
Recall no. 96v099000-brakes; 3 weeks after the work had been performed the problem is still occurring.
Anti lock brakes failed prior to recall notice.
Vehicles abs braking system failed intermittently due to defective hydraulic system, causing extended stopping distance.tt
Abs brake system went out, experiencing long stopping distance, almost resulting in accident.tt
Antilock brake hydraulic assembly failed, causing brake failure.*aw
Antilock brakes locked up. *sd
C96v099000, campaign bulletin was for abs braking system, consumer was concerned because repairs were done, and he had no brakes,dealership charged consumer $217.21 for repair of a pump. Consumer stated that there was no problem with brakes, dealer replaced faulty accumulator.*yd
Faulty master cylinder, causing abs brakes to fail prior to recall.
Ea94-028 active, abs failure, applied brakes complete loss of brakes, pedal went to the floor.tt
Abs; failure on the abs braking system failed, complete loss of braking ability causing the consumer to have a near accident ea94-028.
Abs system recall work completed, however continued to fail.
Anti lockbrakes have failed several times.
The abs pump failed causing total brake loss, almost causing an accident.tt
Recall #96v099000 chrysler/brakes:hydaulic: anti-skid system; while drivingvan on jan 28, 2000, abs unit went out. At that timeabs warning light and the brake light came on.van was towed away to a mechanic. Later,van was driven to the dealership. Dealership could not find a problem with the van. Dealer has asked owner to pick up van and drive the van unitl the problem happens again.
Abs brake light came on, due to abs brake system failure three times, replace abs system.tt
Anti-lock brakes locked up, causing vehicle to skid/loss of control.
Anti lock brake system failed due to abs pump failure prior to recall notice, unable to get repaired due to lack of parts.
Going 25 or 35 mph in the down town area and abs brakes light came on and brakes went out dealer or manufacturer offer no assistance.tt
Abs and brake light illuminated, dealer said that both hydraulic unit and pump assembly had to be replaced.tt
Consumerwas driving along during normal road condtions and abs warning light came on and the entire system went down.
Dt:the contact owns a 1993 plymouth voyager. She was going to pick up her daughterfrom school on 10-14-05 andvehicle had no brakes. She had to go5 mphall the way home. She spoke with someone at chrysler, who notified her that there wasmanufacturer'srecall685 on vehicle concerning the brakes.the dealer told her it would be two weeks before they could fix the recall because they have to make the part that was recalled.the dealershipagreed to give her a loaner if she could get authorization from chrysler. However, chrysler has told her that a loaner was not part of the recall campaign. She asked chrysler how she was suppose to get the car theapproximate 12-13 miles to the dealership, and she was told to just get in the car and go.
The brake and abs warning lights light up, as driver continued driving the pedal became hard, driver was able to turn and stop vehicle.
Abs system failure, total loss of braking ability.tt
The main concern is the transmission, not under warranty that cost $2500 to fix.the fusable link for the a/c actually burned, smoke was emitted (and also when the fan motor burned on the engine system).these are road hazards when the vehicle stops functioning with no warning.
Ea94-028 active, abs failure, yellow and red light comes on, loss of brake effectiveness.tt
Recall related, 96v099, abs brake failure, in for repair , dealership would not replace defective parts, yellow brake light comes on, brakes lockup.
1-28-00 dealer replaced abs pump motor and relay, 69,423 miles...on 7-24-00 replaced again abs pump motor, 74,532 miles..on 2-18-00 replaced bad wheel sensor.dealer no charge for 1st. Repair (warranty). Dealer charged $205.00 for 7-24-00 repair (out of warranty) checked nhtsa site noted chrysler repairing these problems on components some for 100,000 miles others for lifetime, contacted dealer (mckean) told them of this information, was unaware of this, called me back next day refunded charge only because the part failed, not under the info on nhtsa site. Informed nhtsa information is wrong, voyagers have 2 different anti-lock brake systems, only 1 is covered. Is this correct? both times brakes failed, wife is leary of driving the van. Thank you.
Consumer states while driving vehicle brake light and abs light illuminated, shortly after consumer has to start braking from a distance.consumer states the pump on the absis constantly runs.mechanic states pump motor is not suppose to run all the time.nlm
Anti lock brake light activates intermittently and pedal feels mushy.tt
Anti lock brakes failed due to faulty recall part, however repair can not be completed due to lack of parts.
Abs brakes; on several occasions, brake warning light illuminated w/vehicle vibrating. Brakes don't respond to pedal travel. Ttevery time it happened when the road was wet and slick.
Went to stop the truck and experienced total brake failure. Abs system. Please explain.tt
While driving, abs malfunctioned, brake pedal became hard, when made attempt to slow down, then continued to roll forward.tt
Abs system failure, total loss of braking.tt
Had nine experiences with having to shift into lower gear because abs brakes would not work.tt
Abs; failure on the abs braking system failed, complete loss of braking ability causing the consumer to have a near accident ea94-028.
Abs warning light continuously came on, dealer replaced piston for abs.
Recall 96v 099 000/anti-skid system:brake pedal will not depress. Vehicle taken to an independent repair shop, and informedconsumer that abs pump has failed.dealer notified. Feel free to provide any further information.
Failure of the abs brakes, need to replace the master cylinder on the vehicle, also the transmission fluid leak.please describe in more details.
Antilock brakes failed 5 times. *sd
Abs warning light continuously came on, dealer replaced piston for abs.
The van has experienced complete brake failure with the abs system on the vehicle. Please describe.tt
Abs: brakes sometimes do not respond, takes long time to respond, locks up; also extended stopping distance.
Consumer was driving at highway speed the abs anti-lock brake light came on there were no brakes.tt
Recall foranti skid system(96v099000 manf#685. Recall was tested as being okay at the time. 10,000 miles after that, recall problem failed & it was replaced.then, vehiclehad approximately60,000 miles on it. In aug 2000,indicator light came on.unit failed approximately25,000 miles later , and dealer had no problem replacing it again. Reason given for failing againwas that units were rebuild.there was no change in design of system to remedyreason for failure.
1-28-00 dealer replaced abs pump motor and relay, 69,423 miles...on 7-24-00 replaced again abs pump motor, 74,532 miles..on 2-18-00 replaced bad wheel sensor.dealer no charge for 1st. Repair (warranty). Dealer charged $205.00 for 7-24-00 repair (out of warranty) checked nhtsa site noted chrysler repairing these problems on components some for 100,000 miles others for lifetime, contacted dealer (mckean) told them of this information, was unaware of this, called me back next day refunded charge only because the part failed, not under the info on nhtsa site. Informed nhtsa information is wrong, voyagers have 2 different anti-lock brake systems, only 1 is covered. Is this correct? both times brakes failed, wife is leary of driving the van. Thank you.
Anti-lock brakes failed, causing accident/injury.*skd
The seals are wearing out,causing the abs anti-lock brake light to come on . Please describe .
Consumerwas travelingat 60mph and the abs brake system didn't wok at all. Whenapplyingbrake the pedal, itwent all the way to the floor. Also,consumer has a transmission leak, and the dealership is aware of the problem.
Abs light. Lit up within 1 mile, brakes became stiff, greatdeal of force applied in order to stop.tt
Dealership refused to send a mechanic to repair 3 recall notices, including recall 99v113000/ air bag failure; recall 97v148000/ seat belt failure, and 96v099ooo/ abs brake failure.authorized another mechanic to perform work to repairrecall, or provideconsumer withnecessary parts to repair the defects.consumer was informed thatdealership wasunder no obligation to perform these functions. The consumer had asked the manufacturer for assistance in repairing the steering wheel, the windshield wiper pivot and lift gate supprt bolts, because theparts were defective, but the manufacturer refused to help.
Anti lock brakes failed several times.
Abs brakes failed, accumulator did not hold pressure.nlm
Abs: hydraulic brake system failed while driving; pedal went to floor; reported by mrs huber's father.tt
Abs, brake failure, frontal collision, impact 12:00 position speed 25 mph, loss of brake pressure had no brakes, ea94-028 active.*
Braking system failure, abs equipped.tt
Recall repair completed (96v-099), however abs system continues to experience problems, dealership refuses to fix again to repair vehicle.*mjs
The vehicle would not drive when put in gear.the transmission whines but the van will not move.when the van finally goes into gear it will not shift, it sticks in gears.the brake pedal is soft and goes to the floor, but will not stop quickly in an emergency.the original paint is also peeling to bare metal and is rusting, the clear coat is bubbling and the paint is starting to peel on the hood.
Driving along when abs warning light came on and vehicle became very hard to stop.
Abs pump failed, causing abs warning light to come on.*skd
While applying brakes on bumpy roads driver receives very little response from abs. It feels like traveling on ice.
Abs, brake failure, loss of effectiveness, in for repair replacement of hydraulic system, also abs warning light came on. Ea94-28 active.tt
Consumer was driving down a hill and with no warning the abs anti-lock brake failed.t
Abs system failure, driver experienced a loss braking, and excessive brake pedal travel.
Abs warning light continuously came on, dealer replaced piston for abs.
Anti lock brakes not working properly.
The contact owns a 1993 plymouth voyager.the current and failure mileage were 122000.there was a safety recall on his vehicle abs hydraulic control unit, and that the brakes, drums and those components associated with the safety recall have failed on his vehicle.the dealer stated that all of these things had been replaced on the vehicle before he purchased it and after purchasing the vehicle and taking it to another mechanic found that not to be true.
Received a recall letter for anti-lock brake system which consumer had serviced through the dealership approximately one year or more ago. Returned vehicle to dealership for same problem, but dealer refused to repair without cost.the manufacturer extended warranty is good for ten year or 1000,000 miles. Mfr.# 685 and nhtsa # 96v099.
Recall 96v09900/ anti-skid brakes; abs light flashed on. Vehicle taken to dealer, repairs were made that were not authorized by owner and were not covered under warranty.manufacturer contacted.*ml
Abs had to be replaced, abs light kept coming on.tt
The abs system light flashes ,and a clicking sound from under the dash ( hydraulic unit).tt
Abs anti-lock brake warning light keep coming on .tt
Abs sensor does not function properly when coated by snow, causing brakes to lock up. *dh
Brake and abs light came on.then,brakes started to fail.consumer almost went through a intersection.consumer felt car should becovered underrecall.
At 5 a.m. I was travelling at 65 mph on the interstate when i saw a deer cross in front of me.i immediately hit the brakes.one rear brake locked.i struck and killed a large deer.the grill shattered, the radiator crushed and pushed back into the engine.the battery wires fused together and the entire electrical system shut down.my two children (18 and 17) and i were bruised and shaken.the airbag never deployed.
Heavy duty brakes; upon application brake pedal went to the floor w/vehicle responding slowly. Incident occrred twice cause still unknown. Please describe.
When roads are wet the tires cause skidding and poor stopping distances due to poor design/manufacturing of these tires.owner has all 4 tires available.tt the tires still have plenty of tread wear left, tire depth is still at least 5/32 on all four tires accident occured on wet road going 25 mph consumer braked for a stop sign on the road which was only on the road and no standing sign existed , the vehicle skidded straight ahead and went into a guardrail, consumer could not control the vehicle because of the skid even though it was just skidding very slowly when impact came became consumer's first reaction was that brakes which were repaired recently werenot done properly, second occasion consumer braked for a light but the vehicle should have been able to stop but went right through the intersection.
Poor braking system. *sd
Consumer was driving with two children in van try to stop at a stop sign and van wouldn't stop went through the stop sign had to drivevan in low gear.tt
Bolt failure of serpentine belt tensioner which resulted complete loss of all power/functions. Please describe details.tt
Brakes are still failing-after having them looked at 8 times.tt
Experienced brake lock-up while attempting to stop.
Vehicle steering belt tensioner broke and lost all concerning controls.2nd occurance.(pe95-012).tt
Experiencing intermittent brake failure, pedal goes to the floor.tt
The truck has had 8 brake jobs in a year.the brakes fail and none are present. This has caused an accident. Please describe.tt
Consumer was driving the vehicle at 45 mphapplied the brakes and pads were hard. The pedal went straight to the floorboard, and the consumer had to let go of the accelerator. The vehicleslowed down andcame to a complete stop.
Consumer was entering highway with (l) signal on and vehicle started to spin out of control.consumer felt thiswas a very dangerous situation, this has occurred on 2 separate occasions, each time the brakes have been applied, possible brake problem.
Rear hatch door shocks broke, causing back windshield to explode in my partners face.abs braking system also under recall and dealer said the recall has been repaired but still does not work properly.
The hydraulic assembly modulator went out at 28,326 miles.tt
Wheels will not lock up on dry roads when brakes are applied in panic situation
Excessive front brake wear w/abs possible interacting with dragging. Please describe details.tt
Brake system malfunction, brake lining and calipers are defective.tt
Brake calipers failed, emitting burning smell/weired sound. Tt
There are plastic piston in the caliper that make the pedal wear out.tt
When consumer drove vehicle about 45 mph he was having problem with the brake pads.the brakes pads fell off the vehicle.when driver noticed he just found one pad, and the other one was lost. Consumer had talked to dealer where he bought the vehicle, and they told him that vehicle is not under warranty.
Front brake rotors warped, causing brakes to vibrate, also premature wear of front brake pads and replaced tires.
Defective brake pad material, caused premature pad wear/brake failure. *sd
Due to usage of cheap material the 2 front rotors are rusting and pitting, causing holes to develop, and resulting in brake failure.
Front brake rotors warped, causing brakes to vibrate, also premature wear of front brake pads and replaced tires.
Abs, ea94-028 active, in for repair, brake failure rotors failed vibration in front, extended stopping distance.tt
Abs brakes; indicates rotors turned repeatedly w/erratic braking. Please describe details.tt
The left rear brakes will lock up and cause the vehicle to loose control.tt
Brake system malfunction, brake lining and calipers are defective.tt
Replaced master cylinder.
Master cylinder assembly failed prior to recall notice.
In dry weather went to apply the brakes there was no brakes,have abs anti-lockbrakes,dealer replaced the pistonand the pump .
Brake master cylinder failed.
Failure of dual function pressure switch, resulting in loss of brake power without warning.this is one of many brake problems owner has experienced with this vehicle.dealer has repaired the vehicle. *ml
Dt: the contact owns a 1993 plymouth voyager. While applying the brakes the vehicle would not stop and the vehicle would slide into the intersection.she was told by a mechanic that the problem was with the master cylinder. Initially the problem was intermittent, but now it happens all the time. The contact is unable to drive the vehicle because it is unsafe.the vin is unavailable at the moment.
The vacuum brakes are no good and they do not stop the car. Please describe.
The vehicle lost brake power while driving approximately 35 mph.the dealer determined that the hydraulic brake pump had to be replaced, but was not able to get the part to fix the vehicle.
Tensioner on the serpentine belt cracked and steering was lost.tt
Bolt failure of serpentine belt tensioner which resulted complete loss of all power/functions. Please describe details.tt
Driving vehicle at speed of 35mph, lost control impact 12:00 position, driver side air bag did not deploy.tt
While attempting to change lanes in traffic, the steering lost control causing the vehicle to spin 3 times and face oncoming traffic, another time the steering lost control was when the vehicle was cut off by another vehicle , consumer received recall 00v-305, however the dealer stated that the recall had nothing to do with the loss of steering control.
The dealer has no parts available to repair recall 00v-305 for the steering wheel.nlm
Cracking noise as driver turned the wheel.
Consumer contacted the dealer to order the air bags be removed from the vehicle,and the lugs: nuts to be tightened. Dealer inspected the steering wheel, and indicated to the owner the steering wheel needed replacing. Consumer was pulling out the driveway when the steering wheel separated from the steering column because there wereno bolts or nuts holding the steering wheel in place.also, there is a recall for the 91 and 92 plymouth voyager on the same problem manufacturer's recall 708. Please provide any further details.
Nhtsa recall 00v305000 concerning steering wheel separation. Consumer requesteda rebate in the amount of $242.98 for the steering wheel assembly repairs due to a recall.consumer was informed the vehicle was not covered under recall due to the vehicle identification number.. There were other problems with the vehicle such as a malfunctioned air condition, driver's seat, transmission, and a paint defect.
The steering wheel completely disengaged and fell off. It was the same problemas stated inrecall00v305000.
Stiff steering.
Dealership refused to send a mechanic to repair 3 recall notices, including recall 99v113000/ air bag failure; recall 97v148000/ seat belt failure, and 96v099ooo/ abs brake failure.authorized another mechanic to perform work to repairrecall, or provideconsumer withnecessary parts to repair the defects.consumer was informed thatdealership wasunder no obligation to perform these functions. The consumer had asked the manufacturer for assistance in repairing the steering wheel, the windshield wiper pivot and lift gate supprt bolts, because theparts were defective, but the manufacturer refused to help.
When traveling across train track vehicle came to a complete stop due to the steering wheelbreaking away from the thin metal piece which is attached to the steering column. Consumer has contacted the dealer, dealer has yet to replace parts . Please provide any furhter details.
While driving, steering wheel broke off from weld,fell into lap of driver, applied brakes to stop vehicle, according to dealership, defective weld.
Replaced the steering wheelwhile backing into a spot,the steering wheel fell off.please give more details.
The consumer experienced a steering wheel and column problem/recall.the consumer was told by dealer that there are unable to do anything.(recall# 00v305000)scc
Steering wheel tilts up and down; dealer disassembled steering system; steering column defective.tt
Power steering upon cold start while turning must use excessive force. Please describe details.tt
While driving, serpentine belt tensioner failed, causing loss of power steering.tt
Power steering problems.tt consumer was driving and heard a loud bang and lost power steering, tensioner blet had to be replaced, also consumer having problems with back latch on trunk.
Steering gear box failed, causing steering to make grinding noise.
The power steering will go out every once in awhile. Please explain.tt
The steering tensioner belt holder fractured and the driver almost lost control of the vehicle.
Power steering belt tensioner broke causing loss of power steering.tt
Power steering belt tensioner fractured.tt
Power steering belt tensioner broke, allowing parts to fall off, causing vehicle to lose power. *dsh
Vehicles steering belt tensioner broke.tt
The steering belt tensioner fractured and caused loss of steering. Please describe.tt
Steering belt tensioner fractured and had to be replaced because of vibration.
Steering belt tensioner came loose, loss of water pump pressure, and steering.tt
Power steering belt tensioner bolt broke. *dsh
The steering tensioner belt has broken and left the occupants stranded. Please describe.tt
Steering belt tensioner broke, caused loss of all power steering, could not turn wheel, speed 15 mph, no warning.
The steering belt tensioner needs frequent replacement. When it goes out the truck loses power steeing. Please describe.
Power steering belt tensioner broke while driving and consumer could not steer auto-consumer was stuck in traffic.
Power steering belt fell off while driving during wet conditions.tt
Power steering belt tensioner broke while driving and consumer could not steer auto-consumer was stuck in traffic.
The power steering belt tensioner has fractured,the part was replaced on 6-26-95. The same problem has taken place, causing a loss of power steering.
Steering belt tensioner broke, loss of power steering and water pump.tt
While driving the vehicle lost control because the belt tensioner fractured. Please describe.tt
The tensioner has broken and caused loss of steering. Please describe.tt
Failure of the steering belt tenisoner loss of power steering.tt
Power steering belt tensioner fractured. Please describe details.tt
The steering belt tensioner needs frequent replacement. When it goes out the truck loses power steeing. Please describe.
Abs system brake failure, power steering belt tensioner fractured.tt
#pe95-012 the power steering tensioner broke .tt
Had to have the power steering pump replaced after a year.tt
Belt tensioner broke, resulting in hard steering, replaced belt and tensioner.tt
Vehicle steering belt tensioner broke and lost all concerning controls.2nd occurance.(pe95-012).tt
The power steering tensioner belt broke causing loss of steering. Please describe.tt
Had to have the tensioner replaced because it was bent, steering was difficult.tt
The belt tensioner broke , there was a short in the electrical ignition and vehicle caught on fire. Please describe .
While driving the steering idler arm broke,causing the vehicle to lose steering power and brakes.
Front end vibration due to front tie rod problems. *dsh
While traveling at approximately 45 to 50 mph, a bolt inrack and pinion steering broke off, causingconsumer to lose control ofvehicle. Consumer's vehicle forced another vehicle off of the road. However,vehicle would make no directional changes.dealership refused to examinevehicle, and was informed to seek a lawyer.please provide any additional information/attachments.
Noticing noise in steering rack when making left turn, problem has not been found.tt
When making a turn the wheel locked up took to dealer said its the rack and pinion .tt
The motor on the rear windshield wiper failed.i have had numerous system failures on this vehicle, including transmission, air conditioning, rack and pinionsteering.most of the failures were within the first couple of years of ownership.most were not of the ordinary variety.
My paint is peeling to the point were it is starting to rust.
Dealer replaced flex plate assembly, consumer stated there was a rattle in the front end and dealer found the assembly cracked.
Nhtsa recall 00v305000 concerning steering wheel separation. Consumer requesteda rebate in the amount of $242.98 for the steering wheel assembly repairs due to a recall.consumer was informed the vehicle was not covered under recall due to the vehicle identification number.. There were other problems with the vehicle such as a malfunctioned air condition, driver's seat, transmission, and a paint defect.
1993 plymouth voyager.manufacture defect with the paint. All the vans made in that year and 1994 are peeling and rusting in the same places. I feel the company neglected to recall these vans to be repainted to save them money. My van is in good condition and i would like for it to be property repainted up to standard.
Upon doing recall campaign 95i001000, dealer broke rear door trim panel, dealer/mfr won't assist in replacement.
On 1/9/99 the passenger door of my 1993 voyager flew open as i was turning a corner.my son was in his seatbelt and was therefore not injured. The reason the door opened was a latch failure.the door latch had torn away form the sheet metal on the door.the door latches on both doors have repeated failed to engage properly.usually this was remedied by closinf the door again.i have brought this to the attention of the dealers during the warrany period.i was told that the problem was "loose screws" in the door latch assembly.the screws were tightened and sometimes replaced but the problem persisted.now i'm told that the problem is really due to improper door alignment.this caused the latches to loosen.however after repeated operations in this condition it also caused the metal around the door latch to fail. The metal is ripping around the drivers door latch as well. The cast to repair is $250 per door.chrysler will not assist with repairs since the car is out of warranty. (even though the problem was brought to their attention during warranty and misdiagnosed. This may be a serious safety problem.
Side sliding door felled off track while closing onto vehicle owner's left foot, broken toe.tt
When parked on incline sliding door glides back gains momentum and falls off track.tt
Sliding door on my minivan fell off onto my son and my nephew while they were opening the door to get into the van.
Power door locks/ latches came out, and making it very difficult to open door form the outside.
Daughter opened sliding door and it fell off.
Side sliding door came off the track.tt
Inside door handles broke.
2 outside door knobs on the front doors are coming unattached.tt
Consumer states that the front lap and shoulder belts on the driver's side are inoperable. Consumer is also experiencing a problem with the sliding door.
Door hinges on the front weld break when opening and closing, door will not close properly.door hinge are welded to door, this weld failed due to metal fatigue, consumer believes this is a design fault.
The driver side and passenger side door had come off and was hanging by the hinges.the dealer is aware of the problem.tsscc
Consumer got out of vehicle and the wind bent door hinges,got the driver's sidedoor to close,started driving and driver's side door came open . Please describe .
Driver's passenger's side doors have fallen offhinge which has preventeddoors from opening and fully closing.consumer has replaced parts ondriver's side door, passenger's side door is still broken. Please provide any further details.
Rear windshield wipers are not operable.also,sliding doorsare off the trackwhen closing.
The driver side door is coming loose from the hinges. The wind would blow against it while driving and caused it to shake. The insurance agent indicated, after inspecting it, that it was a manufacturer defects. Had taken to dealer and mechanic had welded the hinges but that failed to keep the door shut. Mr
Rear liftgate shock/strut sheard off.owner notes that vehicle had to be driven with hatch up. Owner is very concerned for safety.
Rear hatch bolt broke, allowing hatch to fall suddenly. There has been a recall on this particular component on other models, however consumers vehicle does not meet the guidelines.
Transmission failed, serpentine belt failed, support rod to hatch failed causing injury to consumer when hatch fell on head.
Backing out of garage back door flew open. Explain in more detail.tt
Ea94-005 active, vehicle involved in 5:00 impact while crossing intersection speed unknown rear liftgate hatch open.tt
Rear lift gate bolts detached, releasing the gate, hitting driver in the head.tt
Rear liftgate opened upon impact; vehicle was hit on side of driver's door; rolled over 2 1/2 times; landed on its roof; vehicle totaled.tt
Rear hatch bolts broke off, causing door to slam shut.
Rear liftgate latch bolt broke,causing liftgate to fall down. *sd
The liftgate support bolt failed prior to recall notice (99v-213) causing damage to the shock.*mjs
The rear hydraluic strut bolt sheared off and the strut went through the headliner of the van. Now it will not close. Please describe.
The rear hatch hydraulic bolts broke off and caused the door to come slamming down.tt
As rear door was openingbolts forsupport ofliftgate sheared off, support went through rear window and smashed it.
Rear lift gate hydraulic cylinder broke causing the window to break.tt
Hatchback gas struts which support the hatch broke, fell into the glass, shattering the glass,causing the hatchback to fall down onto the consumer. Consumer has contacted the dealer. Please provide any further details.
The bolt holding the hydraulic lift in the rear liftgate broke off, causing the lift to swing upeard, puncturing the roof.
Rear hatch door shocks broke, causing back windshield to explode in my partners face.abs braking system also under recall and dealer said the recall has been repaired but still does not work properly.
Hatchback support rods fell out of position due to holding pins disconnecting from their positions.
Rear liftgate had malfuntioned on a few occasions. It did not hold up due to hyudraulic cylinder trunkbreaking.had to be replaced twicebefore for same problem. Please provide more information.
Hydraulic lift for rear gate hatch failed, the screw sheared off and the liftgate came crashing down.yh
The rear hatch latch the support on the right side broke.tt
Liftgate support bracket bolt was broken and disconnected.could see separation before it happened.
The rear gate collapsed on the owner. The hydraulic strut failed. Please describe.tt
The hydraulic support on the passenger 's side of the hatchback door broke away from the frame and lodged up into the roof of van. The dealer will contact consumer about the problem.
Rear hatchback rod bolt sheared off and broke.owner notes that hatch falls and strikes owner in head.
Liftgate support bolt broke, allowing the rear gate to fall on drivers head, weak support bolts, replace three times, the recall part are worse than theoriginal part.
The bolts to the hydraulic lift supports broke off,and when the owner tried to shut the liftgate, the supports busted right through the window,shattering glass over the owner.
Thelifegate bolt that holds the cylinder sheared off,almost resulting in n accident.will be taking to the dealer.
While driving at about 15mph back door flew up. Consumer pulled over to shut door, but it would not shut.then it finally closed.took vehicle to dealer, and they saidthere was a recall on the door (recall # 95i001001 and 95i001005). Went to have recall repairs done.when picking up vehicle consumer noticeddoor was out of line,but there was no repair person around.consumer brought vehicle back the next day, and they said that the hinges were out of line, and wanted consumer to pay for repairs.consumer felt that if door would not have opened on its own, hingeswould have never been out of line.
Dealership refused to send a mechanic to repair 3 recall notices, including recall 99v113000/ air bag failure; recall 97v148000/ seat belt failure, and 96v099ooo/ abs brake failure.authorized another mechanic to perform work to repairrecall, or provideconsumer withnecessary parts to repair the defects.consumer was informed thatdealership wasunder no obligation to perform these functions. The consumer had asked the manufacturer for assistance in repairing the steering wheel, the windshield wiper pivot and lift gate supprt bolts, because theparts were defective, but the manufacturer refused to help.
Original deep metallic blue paint is coming off vehicle.
Received notice of recall on the rear lift gate latch, no repairs made due to inavailability of parts.
Front end makes cracking noise.
Van vibrate so bad, causing parts to fall off, vehicle hard to control, replace struts/axle/fix auto transmission and replaced it/pulley broke off the belt.tt
Front end misaligned, causing front end to shake while driving.
You name it, it has broken.the rear wiper motor quit in the middle of use.when it rains and i turn right, the whole van just stops.right now, can't turn right without constant noise and jerking.have had the front axle replaced 4 times.something keeps tearing it up.i was told motor mounts, but that is expensive to replace.i was also told the engine, the transmssion, the wheels.i get different stories from each person.can't contact plymouth manufacturer.car stalls between gears then jerks into next gear.people at dodge place where i bought van are not nice, and won't even look at vehicle without charging 50.00.they overcharge for everything.wish the thing would blow up so i could get a different vehicle, and not lose so much money.many, many problems with this year make and model.know many people with exact problem.manufacturer needs to replace at his cost!!!i do not know all the names of exact components to place on questionnaire to give more help.i would be happy to discuss this case with anyone.
Poor handling/swaying. *sd
When left/right frot lower ball joints are greased, grease can get on brake disc, contaminating brake pads, resulting in brake failure.
Lower ball joint grease overflows onto brake disc which, in turn, rotates the grease onto brake pads, causing front brake failure.
Front wheel bearing failed.
Right rear wheel locked, causing accident and injuries.*tw
Struts replaced 4 times. *sd
1993 plymouth voyager had a tire blowout and lost control upon slowing also struck another vehicle. *njone of the occupants in the vehicle was injured by glass. (ohio traffic crash report # 10-0442-90)letter updated 03/17/10
Front brake rotors warped, causing brakes to vibrate, also premature wear of front brake pads and replaced tires.
Tires wore out.
When roads are wet the tires cause skidding and poor stopping distances due to poor design/manufacturing of these tires.owner has all 4 tires available.tt the tires still have plenty of tread wear left, tire depth is still at least 5/32 on all four tires accident occured on wet road going 25 mph consumer braked for a stop sign on the road which was only on the road and no standing sign existed , the vehicle skidded straight ahead and went into a guardrail, consumer could not control the vehicle because of the skid even though it was just skidding very slowly when impact came became consumer's first reaction was that brakes which were repaired recently werenot done properly, second occasion consumer braked for a light but the vehicle should have been able to stop but went right through the intersection.
Left rear tire tread separated causing loss of control and collision, damage to vehicle. (ohio traffic crash report). Mjs
Was traveling 60 mph in heavy trafficand heard a loud noise. Pulled over, noticed rear tire's tread had peeled off with some force , and had wrapped aroundwheel base andaxle. Had put a dent in vehicle.p205/70r15, dot w2m0sva256 on a 1993, plymouth, voyager.firestone fr680 tire was not included in any of the recalls.
Paint is falling off
The paint is peeling badly on the hood, top, and sides.
Dark blue paint peeling from hood and roof of vehicle.have noticed other voyagers in our area with the same problem, no safety defect listed in the summary.
The paint is rapidly falling off the hood and the roof of my van!
While driving and coming to a stop, vehicle surges. Seems at first like it is going to stall which may cause an accident.cause unknown.please provide further information.
Driving vehicle, at stop sign, vehicle suddenly accelerated, took foot off pedal, still accelerating, tried slowing, put in neutral to stop, finally stopped.
Engine accelerates without foot on pedal; applied brake, barely slowed down; surged from low to high rpms; no warning.tt
Failure of the throttle sensor caused acceleration that could not be controlled by the brakes. Nm
Airbag light came on, and horn/cruise control stopped working. Dealer determined clock spring assembly needed to be replaced.
Idle valve defective, causing vehicle to stall.
Throttle stuck causing sudden acceleration. *dh
Vehickle lurches forward with foot on brake.
Vehicle was parked, put vehicle in drive, vehicle went into open throttle position, went into high idle impact 3:00 position, speed unknown.tt
The belt tensioner was replaced five times keep falling off when raining,accelerates .tt
Driving, slowing down with foot on brakes, the vehicle suddenly accelerated, knocked down neighbor's fence and guard rail.
About every 30,000 miles transmissionwent out. Consumer's wife was petrified entering the beltway as vehicle gradually picked up speed. Transmission has already been replaced.
Sudden acceleration when shifting from park to drive. Can nhtsa provide information on this matter.
The belt tensioner was replaced five times keep falling off when raining,accelerates .tt
Clock sping is a wire harness located in the steering column that controls the driver side air bag, horn & cruise contol . When damaged from no fault on part of the driver the horn will not work the air bag will not deploy when needed or might deploy without any impact . I feel that this is a safty defect that should be repaired by the manufacturer at no cost to the consumer.
Transmission blew out when going up on a ramp off the freeway at 50mph (18 nov 96). Taken vehicle to transmission shop for repairs. The 2nd time, had foot on pedal & vehicle did not go, then it suddenly accelerated.
Traveling about 40-50mph with cruise control on. Stepped on accelerator & nothing happened. Could hear the engine running. Vehicle started to slow down. Coasted to side of road. Had it towed. Was informed the transmission failed. This is the third (3) time this has happened. Chrysler paid for the first 2, but not for the 3rd one.
When taking foot off the accelerator, the vehicle engine shuts down after driving the vehicle for a long period of time.
Accelerator stuck, resulting in vehicle lurching forward. Please describe details.
When put in drive vehicle accelerated suddenly and unexpectedly, resulting in a collision. Vehiclewas totalled. *ml
When taking vehicle out of park into reverse with foot on brake, the throttle stuck, causing vehicle to increase speed, resulting in anaccident.
Failure ofthe rear left window, alleged rear window shattered for no apparent reason, sending glass fragments into the vehicle.
The rear tailgate glass has shatttered on two occasions,causing glass fragments to fall inside of the vehicle.
Consumer drove vehicle on 9-12-97, liftedhatchback, took out grocery and the hatch slammed shut. At midnightvehicle was fine, the next morning when she went out, she noticed the rear back window had exploded overnight.
Upon using defogger system rear window shattered.tt
While vehicle was stopped at a traffic lightrear window explodedwithout any objects hittingwindow, cause unknown.please give any further details.
While driving, rear glass window exploded, no apparent reason, glass shattered into vehicle.
Failure ofthe rear left window, alleged rear window shattered for no apparent reason, sending glass fragments into the vehicle.
Consumer shut driver's door and instantly hatch windowexploded.
Upon closing the sliding door, all doors will automatically lock/if key in ignition doors do not lock.tt
The one screw that holds window to power arm became loose over time and fell out, causing the window to fall off and shatter in the roadway.*ml
The rear windshield wipers will come on for a few minutes and then blow a fuse. For last 2 years rear wipers have not worked at all. The fuse has been replaced 4 times. Problem still exists even with new fuses.
Rear windshield wiper motor failed.nlm
Rear windshield wiper motor failed.nlm
The truck was parked and the glass windsheld just broke there was no one around no cracks for no reason the wind just broke. Called the dealer.
The truck was parked and the glass windsheld just broke there was no one around no cracks for no reason the wind just broke. Called the dealer.
While traveling and without any indicationwindshield arm became undone, and windshield wipers stopped running.
Wiper arm broke off.
Rear windshield wipers are not operable.also,sliding doorsare off the trackwhen closing.
When using windshield wipers without any indication windshield wiper arm broke off, causing windshieldwipers not to work. Please provide further information.
Windshield wipers intermittently stopped working during operation or did not operate at all. Dealer/manufacturernotified, and informed consumer that vehicle was not covered under recall due to vin,and any repairs would be done at consumer's cost.
Driving on interstate during the rain; turned on wipers;working fine for a while; suddenly the driver's side wipers stopped, obscuring driver's vision. Took to mechanic & had to replace windshieldwiper arm & wiper pivot. Passenger's side wipers werestill working.
The first transmission trouble begin by not going in drive, thistransmission was covered by our extended warranty, was replaced in march 1997, the second transmission began to have trouble in november of 1998.the second transmission has not been replaced as of yet.also the rear wiper motor no longer works and you can only purchase a new motor from a dealer.
Wipers smeared windshield on backward sweep, causing loss of control. *tw
Windshield wiper part broke and wrapped around side view mirror.tt
Whenever the windshield wipers are in use, they fail to work properly, causing driver to have poor visibility. This is an intermittent problem. Will be taking vehicle to dealer to check.
While raining and in use the windshild wiper blade flew off the van due to linkage rod to the pivot is weak and unreliable.
Ea97020, front windshield wipers, when the windshield wipers arein the intermittent mode they stop working. The windshield wipers have also stoppedwhile operating in the regular mode. This happens mostly in the intermittent speed.occasionally in the regular speed. The problem has not been corrected.
Vehicle has experienced the same wiper failure on 2 occasions, linkage came off stud for motor, a nut came off, and left pivot came off on linkage, dealer replaced linkage and pivots, consumer is requesting reimbursement for the second failure since it happened only 110 miles after dealer repaired wipers from first failure.
Driver side wiper failed, causing loss of forward visibility, due to broken pivot arm. *dsh
Dealership refused to send a mechanic to repair 3 recall notices, including recall 99v113000/ air bag failure; recall 97v148000/ seat belt failure, and 96v099ooo/ abs brake failure.authorized another mechanic to perform work to repairrecall, or provideconsumer withnecessary parts to repair the defects.consumer was informed thatdealership wasunder no obligation to perform these functions. The consumer had asked the manufacturer for assistance in repairing the steering wheel, the windshield wiper pivot and lift gate supprt bolts, because theparts were defective, but the manufacturer refused to help.
Windshield wiper and arm snapped off while driving, causing poor visibility.
Consumer requested reimbursement for left windshield wiper pivot and motor which failed prior to recall notice 99v-189, manufacturer only paid for the the new pivot and not the motor.nlm
Consumer requested reimbursement for left windshield wiper pivot and motor which failed prior to recall notice 99v-189, manufacturer only paid for the the new pivot and not the motor.nlm
Consumer took vehicle to dealer for recall repair of the drive assembly, when the consumer returned to pick up the vehicle, they noticed the front window where the work was performed was cracked, the dealer acknowledged the cracked window, and also that it was not cracked when the vehicle was brought in, they are not willing to take any responsibility.
Vehicle experienced failure of the recall component (99v-189) windshield wipers prior to recall notification,failure of the wipers caused loss of visibility resulting in vehicle collision. *mjs
Windshield wiper pivot drive arm is not properly connected to pivot shaft, causing it to fall. Thisvehicle vin# is not included under recall 99v189000 although it has the same defect.
The windshield wiper motor had to be replaced because itwent out while in motion during some rainy weather.
Driving vehicle in wet conditions and turned on the windshield wipers,and they started half-way and then stopped.
The motor on the rear windshield wiper failed.i have had numerous system failures on this vehicle, including transmission, air conditioning, rack and pinionsteering.most of the failures were within the first couple of years of ownership.most were not of the ordinary variety.
Ea 97020;windshield wipers malfunctioned, causing the wipers to be inoperative.dealer replaced wiper motor.
You name it, it has broken.the rear wiper motor quit in the middle of use.when it rains and i turn right, the whole van just stops.right now, can't turn right without constant noise and jerking.have had the front axle replaced 4 times.something keeps tearing it up.i was told motor mounts, but that is expensive to replace.i was also told the engine, the transmssion, the wheels.i get different stories from each person.can't contact plymouth manufacturer.car stalls between gears then jerks into next gear.people at dodge place where i bought van are not nice, and won't even look at vehicle without charging 50.00.they overcharge for everything.wish the thing would blow up so i could get a different vehicle, and not lose so much money.many, many problems with this year make and model.know many people with exact problem.manufacturer needs to replace at his cost!!!i do not know all the names of exact components to place on questionnaire to give more help.i would be happy to discuss this case with anyone.
While going through a car wash the hub cap on the right front had come off. The second time went to the same car wash and the hub cap came off again. Consumer feels that there is a defect in the hub cap, and it's a faulty hub cap.
Read more
