Vehicle complaints | FREE VIN Decoder and Lookup tool

We found the following complaints for PLYMOUTH VOYAGER (1992)

Read complaints for PLYMOUTH VOYAGER (1992)

Airbag light came on, then the cruise quit working, and now the horn does not work.i believe the clock spring is defective creating a safety hazard in that the airbag is inoperative and the horn does not work.

Air bag did not inflate in accident, causing neck, face, and chest injuries.dup of 947135, added on 25-feb-98.

Airbags did not deploy in broadside crash suspension is messed up steering wheel wobbles hard when turning engine failed 6 months after van was bought and scores of other problems

Airbag light came on dashboard continuously and stayed on, andright windshield wiper blade came off it completly, broke off.

Air bag failure todeploy and activated under conditions when this ought to have occurred.

The clockspring broke which caused the steering wheel to lock.*mr *jg

Steering wheel locked up while making a right turn at 15 mph. Vehicle towed to dealer,and informed consumer thatclock spring broke and causedwheel to lock up, andair bag light to come on.

Consumer was in accident driver side air bag did not deploy.tt

Frontal collision impact 12:00 position speed 25 mph, air bag did not deploy. Tt

Consumer had an accident and the air bag didn't deploy.please describe.

While in an accident the driver's side air bag did not deploy. Please provide further details.

Driving approximately 50mph and attempting to avoid hitting a truck, ran into guardrail and the air bag did not deploy.

Driver air bag did not deploy during front end collision.tt

Consumer was traveling about 15 to 20 mph was invovled in a head-on collision.vehicle spun around hitting a brick wall; and upon the second impact the driver's side air bag deployed, causing damage to the driver's side occupanteye sight. Please provide further details.

While driving down highway another auto turned in front of voyager,causingit to side swipethe other vehicle. Air bags did not deploy, and the seatbackbroke.

While driving at about 35 to 40 mph under cloudy conditions with headlights on came to a stop sign.while proceeding across the road, another vehicleturned left and in frontof consumer's vehicle, causingconsumer to crash intothe side of other vehicle. Upon impact, driver'sair bag did not deploy.

No deployment of driver's air bag during an accident, resulting in injury.513896 dup of 803524; posted on 09-07-1999.

Driving at speed of 50mph vehicle swerved to the left to miss an object on the highway, driver's side airbag deployed without warning, no impact involved.

While vehicle was at stop light it was rearended by another vehicle traveling 60 mph.neither air bag deployed, and driver's/passenger's seatbacks collapsed backwards upon impact.

While traveling 70 mph vehicle had a frontal impact with a deer. Impact severely damagedright front corner. Air bags failed to deploy which resulted in driver's head hittingsteering wheel.vehicle was totaled with owner suffering from some injuries.please describe details.

Consumer was driving and hit two deer the driver side air bag didn't deploy .tt

While driving at 20 mph had direct frontal impact, the driver's air bag did not deploy, which did not protect the occupant in this accident.the passenger's rear seat belt, in which the css was strapped, unbuckled, causing the css to flip over resulting ininjuries.causes unknown. .et.

While drivingvehicle about 25mphwent over a railroad track and the airbag popped out on the driver's side for no apparent reason. Took vehicle to dealer and the mechanic checked the airbag.

Iwas in a low speed car wreck hitting a stopped vehicle approx, speed was 35 m.p.h., the drivers airbag deployed on impact knocking me unconscious. I sustained major injuries to my back and neck from this now outdated airbag. Why has this product not been recallled and replaced with the next generation airbags. I know the force of these outdated airbags are overkill on protection and cause more injuries and death then needed. This problem needs to be addressed, especially with so many older minivans on the road with these older systems of airbag deployment. Its been over a year since my accident and i suffer not only pain from my injuries caused by that airbag, but anxiety and distress every time i sit in a car with an airbag. I know own a vehicle in which i know that i will not be knocked out and injured by an airbag.

While driving at normal speed, with no impact, driver side air bag deployed without warning.tt

The center of the steering wheel, where the air bag is located, made a popping noise, causing the air bag light to come on and the horn to sound. Cause unknown.please provide further details.

While taveling at about 10-15 mph and makeing a right turn, and after straightingsteering wheel out driver's side air bag deployed. Some minor injuries to consumer. Has not been able to contact dealer.

The shoulder straps on the built-in child seats do not lock after they are pulled tight.

Electrical system fails occasionally. *dh

While drivingabout 10 mph emergency lights went on without a warning,when this happened, the brake pedal got hard. Tried to stop vehicle, but was impossible.thenput vehicle in neutral and aplied brakes again,vehicle finally stopped.

Brakes were defective.consumer took the vehicle to the dealer, who stated thatconsumer's computer wasdefective, anditwould have to be replaced for $1400.00. After taking the vehicle to another dealer it was discovered no defects on the computer.the brake pump was found to be defective.

Abs brakes control unit replaced in september 94/in october, 96, and abs module changed in july, 94. In addition,serviced transmission due to problems/a/c problems in august 94, and battery problems due to electricalshort,replaced battery and repaired electrical system infebrury, 95. Power steering problems, repairwork done in march,95.engine problems occurred, repairwork done to rocker shaft/push rods and oil filter inmarch 95. Finally, in may 95 starter burned out and replaced/in july,95/emergency light becamedefective and reset/recall jun. 96, liftgate latch replaced/december97, seat belt repaired/ apr,97 reset maintenance light and speedometer/ may, 97 belt drive problems and tensionerproblems also exit.dealer aware of the problems and problems go on. Repairwork at owner's expense with extended coverage on some. Provide further information.

When vehicle is put in reverse rear lights will not function, dealer sold vehicle in this condition. Ignition key is turned, starter does not turn over, starter and battery tested and o.k., safety switch replaced and problem persists.

I have owned two 1992 plymouth voyager mini-vans. In both vans i have had a battery explode. Both instances involved 2 different batteries (interstate & everstart) and occured when the ingnition key was turned to start the vehicle.

Vehicle experienced an under hood fire. Local fire department arrived and extinguishedfire.informed consumer that the causes were due to battery acid leakages over an electrical wiring harness.fire causeed damages to two vehicles. Dealer/manufacturer were not notifed at this time.

Battery failed.

Vehicle stalling causing steering to lock up, due to failure of the starter, belt and water pump.

Fuel pump, starter failed two times.

Alternator belt failed.

Vehicle has had 2 replacements of steering belt tensioner, a/c, waterpump, and alternator.(pe95-012) phone number ext:310.tt

The center of the steering wheel, where the air bag is located, made a popping noise, causing the air bag light to come on and the horn to sound. Cause unknown.please provide further details.

The vehicle when driven long distances will cut off and die and take 15 minutes to restart. Please describe.tt

Spark plugs failed.

Ignition problems causes stalling.

Sometime consumer drive at low speed or high speed van cut off.tt

The vehicle stalls without warning, causing the steering to lock-up and the brakes to be inoperative.tt

Intermittent stalling.

The vehicles 'body computer' failed.nlm

Ignition switch fell apart.

While driving the van the key can be pulled out of the ignition and the van will continue to run. The dealer is aware of the problem. The problem has not been corrected.

Ignition key can be removed or inserted while car is being driven, on occasions vehicle can be started without key. Mjs

The starter failed.nlm

Starter rebuilt.

Starter motor failed.

The oil light wire was cut and it caused the engine to go without oil and now the engine is ruined. Please describe.

Wiring harness caught on fire for no reason. Was told at first it was due to cooling fan failure, now i am being told it is the automobile's wiring harness is bad. Need help. Thank you.

Electrical short or shock within the vehicle dashboard.tt

On board computer failed.

Airbags did not deploy in broadside crash suspension is messed up steering wheel wobbles hard when turning engine failed 6 months after van was bought and scores of other problems

The anti lock brakes failed prior to/after recall repairs.mrthe abs light was intermittent.the hyd assembly and the brake system was replaced.there was a grinding noise in the engine, transmission, and when braking. The repairs and or replacement parts are as followed:replaced the gasket, repaired the ground wiring of the abs, replaced the serpentine belt and motor mount .the transmission shift was out of gear.the consumer has requested reimbursement.scc

Whenever brakes are applied vehicle would not stop properly. Pedal would go to the floor. Dealerreplaced three master cylinders. Thennoticed fluid leaking from engine reservoir. Asking help from nhtsa in this matter.

Sudden power steering and water pump failure due to belt tentioner failure.tt

Vehicle stalling causing steering to lock up, due to failure of the starter, belt and water pump.

Fan motor inoperative. *sd

Thermostat replaced. *sd

Radiator overheated. *sd

Engine died due to a broken connecting rod, also replaced pistons.

Belt tensioner failed/noisy resulting in drive belt and tensioner replaced by maryland motors in rockville. Please describe details.tt

Power steering problems. Ttconsumer states high pitched squealing moise develops.

Tensioner arm sheared off, causing loss of power steeering.

At 40 mph the vehicle steering whieel vibrates because motor mounts are broken or cracked. Please describe in detail

Head gasket leaked oil/replaced.

Was just pulling into the driveway when the engine threw a rod. The rod punctured the oil pan and oil leaked out onto the driveway.

Crankshaft leaking oil.

4 cylinder engine fan belts become loose all three dealer keep tighten the belt can't find the problem .tt

Bolt holding belt tensioner broke completely upon cold start. Please describe details.tt

Piston fell through the motor, causing oil leak. *sd

Motor mount failed, causing engine vibration/noise.

Gasket leak.

Left motor mount broke.*skd

If tensioner had fallen off while travelimg, it very weel would have bounced straight through the fuel tank.i checked your listings an found34failures. Feel sure that the family that burned up on the stevenson expressway in chicago had this problem, but the blame was pushed off on a trucker loosing metal off of his truck. The garage here in town stated thay have replaced numerous tensioners, so this is a pretty on going thing. I called detroit on this immediately, and was informed that it is off warranty, so we couldn't care less.i believe this to be wrong.thank you in advance for your kind attention.

The belt tensioner feels like it loose and makes noise . Tt

Noise from engine due to failed motor mounts.

Part no 4612894. Power tensioner pulley snapped. Could result in vehicle accident.tt

Broken connecting rod, causing engineto make a clanking nose, also repaired pistons.

While driving the bolt that holds the damper pulley came out, causing the pulley to fall off.

Piston failed.

Power steering belt tensioner failed. *dsh

Valve body failed.

Upon coming out of roadside rest and speeding up to merge with traffic, engine blew out, putting a 2" hole in block/replaced engine.

Transmission/torque converter failed/replaced; also, replaced engine motor mounts and engine oil pan.

Timing chain failed.

The heads to 4 connecting rod bolts were found laying in the bottom of the oil pan during a pan gasket replacement.

The vehicle needs to have all four (4) motor mounts replaced.tt

Sudden power steering and water pump failure due to belt tentioner failure.tt

Cover gasket leaking oil.

Timing belt failed.

Fan belt tensioner bracket cracked.tt

The enginemounts broke/cracked.

Camshaft leaking oil.

Ea94-028 active, replacement of the abs system, pump assembly.tt consumer also had belt tensioner replaced.

When driving vehicle tensioner belt comes off, and causes a loss of power and steering.

Noisey engine.

Consumer was traveling on highway and vehicle stopped without prior warning, just shut off.

While drivingvehicle will completely shutdown without warning, cause unknown. Dealer cannot identifyproblem. Numerous parts had been replaced, such as plugs, wires, fuel filters, fuel injector cleaners, fuel relay, fuel pump and even the computer, but the vehicle runs for a short time and the problem reoccurs.

Vehicle stalls due to engine failure, causing steering wheel to lock up.

While driving about 65 mph the vehicle lost power. The owner took the vehicle to the dealer and was informed that the transmission and the enginewere bad. Owner contacted the manufacturer by mail.

Fire in the engine compartment of this vehicle, destroyed vehicle.the car lost power on the freeway off-ramp. Vehicle pulled over and another driver pulled over to say the car was on fire up underneath.i saw this same style mini-van on the television program cops on 1/9/99 on fire and burning after having transmission problems. We have had to put in two transmissions in this vehicle. The fireman didn't think the transmission problem was related to the problem howeverthe lady on the tv show stated she had been having transmission trouble.

Possible engine failure resulted in engine to catch fire while consumer was driving.nlm

When driving at any speedvehicle cut off withoutprior warning. Consumer has contacteddealer,dealer was unable to determine the cause. Please provide any further details.

Engine rebuilt.

Engine failed due to computer memory loss. *dh

Vehicle was parked in front on a side street.two minutes later, a neighbor knocked on the door to tell consumer that the his vehicle was on fire. Front of the vehicle in the engine compartment was burned out.

While driving onhighway vehicle completely shutsdown without warning, and sometimes will restart after 2 hours, cause unknown.please give any further details.

Possible engine failure resulted in engine to catch fire while consumer was driving.nlm

The van will be running along and all of a suddent the engine will die.. At a stop light or starting the engine.. In a parking lot.. Pulling away from starting.

Vehicle fire, origins of fire undetermined.

Belt tensioner failed, requiring replacement of tensioner/serpentine belt. *dh

While driving car start screeching consumer stopped and belt tentioner fixedthen 7 mounths later hadbelt fixed again .tt

Belt tensioner assembly failed.

The serpentine belt came off because the belt and tensioner failed.nlm

Vehicle shut down completely due to failure of serpentine belt.

While driving, the belt tensioner broke. Causing the vehicle to go out of control.please describe.

Belt tensioner failed/noisy resulting in drive belt and tensioner replaced by maryland motors in rockville. Please describe details.tt

Drivebelt tensioner broke/fell apart, causing power steering to seize up. *dsh

Serpentine belt dry rotted and cracked; caused temporary loss of power steering.tt

Engine noise upon starting due to serpentine belt.

Belt tensioner bracket failed.(1st vehicle on 601631)

Serpentine belt replaced. *sd

Bolts holding belt tensioner were sheared off. *dsh

Vehicle stalling causing steering to lock up, due to failure of the starter, belt and water pump.

Belt tensioner broke causing loss of power steering .

Belt tensioner fell apart.*aw

According to aaa magazine some chrysler belt tensioners were recalled between 1994 and 1996 on v-6 automobile applications but never on the mini-vans.i suspect it's an identical component, so why no recall on the mini-vans???

While driving, the belt tensioner broke. Causing the vehicle to go out of control.please describe.

Exhaust system failed causing hesitation on take off.

Airbags did not deploy in broadside crash suspension is messed up steering wheel wobbles hard when turning engine failed 6 months after van was bought and scores of other problems

I have a 1992 plymouth voyager.due to a defect in the engine, i had to have it rplaced in april of 2002.then this april, i had to have the transmission replaced. Simply put i had to have the engine replaced due to excessive smoking through the tail pipe. I am sure you have had other reports of this.it costs me $4,251.25 to replace and the transmission was another $2500.i do believe that chrysler should reimburse me for this.i have copies of historical maintenance reports for my van and copies of the bills for the engine and trasmission.when i had the engine replaced my regularplace of repair, goodyear, said it need an expensive valve job and this may or may not resolve the problem.thanks you for reading this.

Faulty oxygen sensor replaced. *mjs

Pcv system failed.

Tail pipe failed, causing hesitation uponacceleration

Muffler failed causing hesitation on take off.

Tension belt for a/c failed

Air conditioner belt replaced due to noise under hood. *sd

Air conditioner inoperative. *sd

Air conditioner belt failed.

Vehicle caught on fire in air conditioning unit.this occured while driving with no warning.tt

Vehicle has had 2 replacements of steering belt tensioner, a/c, waterpump, and alternator.(pe95-012) phone number ext:310.tt

Airbags did not deploy in broadside crash suspension is messed up steering wheel wobbles hard when turning engine failed 6 months after van was bought and scores of other problems

When tapes are removed they are very hot. Please describe.

While using the jack on an uneven pavement the jack will not hold up as it should, the only way this jack will work is on even ground. The dealer has been contacted.

Spare tire cable broke while driving at speed 65 mph, tire flew off from under the bottom.

Spare tire cable snapped allowing tire to hit pavement while in motion. Please describe details.tt

While driving about 5 mph, the cable on the spare tire carrier broke, causing the carrier and the tire to fall off. The dealer was notified about the problem. The problem will be corrected at owner's expense.

Replace third brake light 3 times. *sd

I am a teacher and leave for work early in the morning.i live on an unlit semirural road with no sidewalks. Children walk along the road in order to get to the schoolbus stop at the end of my block.i came very close to striking a group of children because although my lights were on and i was driving very slowly i could not see them in the early morning light/darkness.i have since noticed that i can not see the road very well after dark and upon checking (i thought my headlight bulbs had failed) discovered that the plastic headlight covers have clouded over and far less than normal light is emitted and that light is greatly diffused rendering operation of my vehicle at night unsafe. I have not taken it to a dealer.if i do, are they responsible for replacing the headlight covers?

Headlight lenses cloud up un many of these vehicles to the point it restricts the amount of light that passes through the lens which in turn gives poor visability. If the manufacturers choose to continue using these covers then they should replace them free of charge when cloudy.. This is a safety hazard.

About two weeks ago i reported that the headlight lenses on my plymouth voyager,1992, have become so fogged over that it is nearly impossible to see when driving with the headlights on.i have seen other vehicles of this make with similar conditions.i asked if i should take it to a dealer and if lthey are required to replace the clouded lenses.so far i have not had any response from you.winter darkness is coming on and i will be doing a lot more driving with my headlights on and would like this problem taken care of.i drive almost 200 miles per day and am very concerned.

Consumer vehicle was possibly affected by recall component failure prior to recall92v-147, which caught on fire while being driven, consumer was not notified of recall until vehicle had already caught fire.nlm

Airbags did not deploy in broadside crash suspension is messed up steering wheel wobbles hard when turning engine failed 6 months after van was bought and scores of other problems

Had driven vehicle & then stopped. Noticed an odor of fuel inside of vehicle. Had turned the ignition off. Left vehicle to check. Vehicle had caught on fire. No indication of cause.

Gas line connecter corroded thenleaked.it' s close to exhaust tail pipe,and if system was under pressure, it could leak towards exaust pipe and cause a fire. *ml

Aluminum fitting that connects the lines together at the tank corrodes and turns the rubber gummy then starts to leak all the time when the van is running and then when the van is off and sitting still untill it looses its prime. This also happened to my 1991 plymouth voyager. I feel that this is a very dangerous situation if a person does not spot it and they get rear ended.

While travelingfuel was leaking from seal onto hot exhaust manifold. Please provide further information.

Fuel pump replaced due to vehicle stalling.*skd

Fuel pump, starter failed two times.

Fuel filter gasket blew .tt

Fuel filter failed.

The spray assembly has broken causing the vehicle to stop suddendly.tt

Fuel injection system failed causing the vehicle to stall while in traffic.nlm

The fuel rails leaked.

Electrical arcing at 5 pin connector which connects fuel pump and sending unit.

When vehicle was taken to a mechanic for brake work, the mechanic observeda crack in the seam of the fuel tank. The fuel is leaking. Manufacturer has been notified about the problem.the fuel tank has not been repaired.

Gas gauge indicatorstuck on empty position.

Door locks failed.

Prior to the recall, right side latch had been broken/door got bent.

The side appears to be latched and it is not and the warning bell comes on. Please describe.tt

Bolt sheared off upon closing liftgate/hatch causing liftgate to jam into molding of lock. Please describe details.tt

Whenever making attempt to close liftgate, experience difficulty latch keeps popping open, finally must use key to lock.tt

Consumer was driving the rear hatch came open and the support rod broke .tt

Van was in an accident hit from the rear and the rear hatch latch came open.tt

The rear hatch latch is hard to close.

Rear hatch tailgate popped open after being rear ended by another vehicle at 30-40mph. Please describe details.tt

Rear liftgate opened upon impact; vehicle rearended by another vehicle, low speed; bent bumper; knocked rear seat out.tt

No parts available to repair rear lift gate latch, equipped with electric latch.tt

Vehicles rear hatch latch opened while in motion and broke off one of the struts off the welding.tt

Consumer was driving try to stop the abs anti lock brake system fail almost hit a car and the rear hatch latch came open twice.tt

Rear latch broke, causing hydraulic arm to break off and tear lining in the roof.tt

Vehicles rear lift gate opened while driving when going over a bump.the rear hatch flew open and glass shattered.tt

Chrysler minivan owner received recall 95i00100 for rear latch, owner called dealer for appt but they said parts are not available.

Rear door has to be slammed for lock to latch, also a rattling noise in left rear of vehicle, could be loose post.tt

Scully chrys, ply and manufacturer aren't able to supply area dealer w/parts. Dates given by manufacturer to replace rear latches not serviced.

Rear tailgate opened, causing wheelchair to fall out. *sd

When driving at any speed theodometer/speedometer malfunctioned,and consumer wasunable to use the cruise control.

Speedometer periodically does not work.while driving on highwayspeedometer will go out for about 5 to 20 minutes, and then start to work again.dealer has no remedy for problem.this couldcause an automobile accident.

Dealer replaced the transmission four years ago consumer having the same problem with car .tt

Transmission has been replaced once and now has to be replaced again. Please describe details.tt

Transmission down shifts and jerks harshly while driving/replaced transmission controller.

Transmission has completely malfunctioned, cause unknown.please give any further details.

Automatic transmisson failed while driving home that night

Purchased truck new at 58,000 miles the transission needed to be replaced. Please describe .

Having transmission problems.please describe.tt

There is a snap ring that is defective on the transmision .tt

Automatic transmission failure.tt

Transmission failed.

Transmission has failed 20 times from july 1994 to december 1999.

Transmission slips/fails. *dsh

Replace transmission two times,car burned a lot of oil dealer is replacing part to find problem .tt

While driving about 65 mph the vehicle lost power. The owner took the vehicle to the dealer and was informed that the transmission and the enginewere bad. Owner contacted the manufacturer by mail.

Consumer was driving at high speed and the transmiision went out,causing the vehicle to stop in traffic.

Transmission failed on several occasions.

Had transmission replaced once, repaired twice, it slips and skips gears.tt

Auto-transmission; while driving inter-city, transmission will down shifts to lower gear w/no warning. System rebuilt in 1993 w/other components replaced.

Transmission failure.

Transmission failed.

I have had 4 transmissions replaced to date all of which failed and am on number 5!all replacementshave been factoryrebuilt units.i have had to replace the last two within the last 45 days.this is totally unacceptable and i feel that chrysler should stand behind their products. I paid $ 911.00 for the 7/70 added service protection package when i purchased the vehicle which covered the first replacement. I have paid for the rest but this design defect should be the responsibility of chrysler and they should pick up the expense.

While driving transmissionlocked up and vehicle stalled. There was no warning. Managed to parking lot. Vehicle towed to transmission shop. Was informed the gears had been chewed up. Transmission replaced with rebuilt one.

Transmission would not shift into reverse.back wiper would constantly runmotor out, fuse had to be removed.driver's seat belt plastic cover broke while trying to use it. Brakes make noise when in use.

Consumer experiencing ongoing transmission problem . Vehicle has had one replacement, and it had to be repairedon one occasion. Dealer notified.

Purchased truck used, had to replace the transmission on two occasions. Please describe .

Transmission shuts off while driving.

Transmissionfailed.

Transmission replaced. *sd

Consumer had transmission replace.tt

Abs: applied brakes, pedal very hard; shifted to low gear to stop vehicle; wires going to brake system and motor burnt out; entire system replaced.ttconsumer stated power steering was leaking, also abs light was coming on, it was determined that brake fluid was low, transmission leaking.

Transmission failure.

The transmission does not shift properly and will make a banging noise. Please explain.

Purchase the truck used truck is on it third transmission .tt

Transmission failed.

Transmission had to be replaced because it was slipping.tt

Automatic transmission blew up while driving, dealer said automatic transmission needs to be replaced.tt

While merging with high speed traffic transmission failed to shift and vehicle began to lose power, almost resulting in an accident.

Automatic transmission malfunctioned, causing stalling in park/nuetral or drive position which may resultin a crash.also while driving the vehicle hesitates which may also resultin a crash.there is tsb on these problems.common problem.please provide further information.

Transmission has completely malfunctioned, cause unknown. Please give any further details.

Transmission prematurley malfunctioned at times. Transmission will not shift into gears correctly or becomes stuckin gear. Transmission pump gasket was defective. Manufacturer repaired the pump at warranty cost.

Transmission does not engage in reverse during cold weather.vehicle does not engage between second and third gear, engine winds, accelerates, and transmission eventually engages at a high rmp.

When driving at any speedvehicle is stalling and jerking, and not shifting properly. Also, there is a knocking noise.

No summary listed for above vehicle.

Auto-tran:while driving, transmission stuck in second gear without warning; towed to body shop.tt

When takingfoot off the accelerator pedal, the van jolts. The transmission was rebuilt about one year ago by the dealership for this problem. Owner is experiencing the same problem again.

The transmission on the chrysler has failed three times. The first time was with 22k , chrysler replaced it under warranty. The second time was with approximately 78,000 miles, chrysler paid for the parts, i paid for the labor.the most recent time was 5/11/00 with 119,000 miles. My problem is that it seems every one that i speak to with a chrysler mini- van appears to have transmission failures. This will be my fourth transmission in eihgt years. This is a chronic problem with all of chrysler's mini vans and the nhtsa should address it. Thank you.

Automatic transmission failure, erratic engaging of the gears.

Transmission bangs into gear.

Automatic transmission failed twice.

Transmission failure.

Prior to transmission failing, the vehicle often lunges forward after stopping at a light or stop sign.while the driver would be stepping on the gas to accelerate, the vehicle does not initially move as it should.it hesitates an then lunges forward.n

Overdrive/ransmission failed.

Auto-transmission; while driving inter-city, transmission will down shifts to lower gear w/no warning. System rebuilt in 1993 w/other components replaced.

Auto-tran:shifted from drive to park;left car running while parked on incline;driver noticed car coming toward him;driver pinned between car and work bench.tt

Transmission failed, prior to failing completely consumer heard noise from transmission.*mjs

Transmission prematurely malfunctioned.transmissionno longer shifts into different gear positions.please give any further details.

Going up hill about 60-65mph when transmission failed. The engine was still going. Could not shift into reverse/neutral or drive. Managed to get vehicle to side of road. Had transmission serviced 6 months ago.

Transmission failed.

The transmission has aluminum curved machine part in the pan.

Purchased vehicle july, 1996.1st (original) transmission went bad less than a year later at approx. 70,000 miles.3 years and approx. 35,000 miles later, the transmission that the dealer repaced the first with went bad.paid 1400.00 the first time.they wanted 1800.00 the second time as the warranty was only for 1 year or 12,000 miles on the replace tranny.

Driving home, hard time shifting, vehicle started to slow down, pulled to side, waited few minutes, finally started vehicle again. Took vehicle to dealership, was informed no problem w/transmission, but did not replace it.

Transmission failure.

Transmission rebuilt due to slipping and binding, also makes noise in reverse gear.*aw

Pe95-012 the belt tensioner was replaced having the same problem again, the transmission make a noise and hard to shift .

I have had my abs system replaced 3 times. This time the pedal does not come up properly to shut off the brake lights, and letcruise control to work properly. I feel that this has also caused my front rotors to warp. I contacted the dealer ship and was told that there is a return spring that needs to be added.service bulletin 05-08-92 rer system of the car if the brake light is on. Is the transmission able to function properly or is this what caused my transmisson to go out.

Transmission failed.

Transmission stuck in first gear.

Transmission is shifting from high to 2nd gear, or from 1st to 2nd gear and remains there. Dealer/ mfr. Notified.

Transmission locked at neutral due to a failed shift cable.

Intransmission system,steel line which connects to the aluminum valvesprovoked a chemical reaction which caused transmission cooler line to leak.please provide further information.

Transmission computer failure.*sd

Shifter cable has broken.shifter has been replaced once, and needs to be replaced again.

Transmission/torque converter failed/replaced; also, replaced engine motor mounts and engine oil pan.

Front axle broke while vehicle was in motion five separate times.

A604 trasaxle failed due to snap ring breakage.

The snap ring within the transmission clutch needs to be replace .tt

Hydraulic door shock during cold weather to weak to support door, door falls on heads or crush down shattered back winshields.still not fit yet and still happening.it is very unsafe to use back truck door.

The wheels locked up, and themechanic replaced the cv shaft, 3 miles down the road shaft broke again.

Transaxle bangs into 2nd gear/downshifts, causing transaxle to leak. *sd

Drive belts failed.

Transaxle failed, after erratic shifting/locking in low gear. *dsh

Transmission failed.

The transmission locked up.nlm

Transmission failed.

After the trans. Failled and was replaced under the extended warranty,no other problems to report except the peeling painton the hood and the roof just above the windsheld,that started approx. 6 mos after the extended warranty expired.please let me know if other owners of this type of vechile have had similiar problems. Thank you

Gear shift indicator will not move.

Consumer is expriencing problems with seat belt anchorage, unsecuring childrenin middle right seat next to the door. This is the third major problem with this van, liftgate, steering shaft, now seat belts. Vehicle was purchased sept. 1992, the little spring clip is not broken.

While driving the center seat/right side seat belt anchorage releases when belt is in use.

Seat belt anchorage failure, the middle seat/right side, the floor anchorage hook clips come unattached when buckling up.

The center seat/ right side seat belt spring clip broke, causing the seat belt anchorage to release, while belt was in use.

While driving,the center seat, right side seat belt anchorage, releases when seat belt is in use. Took vehicle to dealer 3 times.

Interior systems,seat belt: automatic seat belts become unhooked from floor anchor in middle row. Driver's seat belt becomes unbuckled while driving. When trying to rebuckle it doesn't work because the release buckle jams. Has not takenin for repairs yet.

The center seat/right side seat belt anchorage releases when belt is in use and when walking over seat belt.

Built in child safety seat belt clip failed, causing clip to come apart easily.

Seat belt anchorage, the middle seat anchorage on right hand side the clip that that attached to the seat belt moves around and then become unattached.

Seat belt anchorage failure, the right side middle row, the floor anchor from the floor hook comes unattachedwhen driving driving or buckling up.

Seat belt anchorage failure, the middle seat on the right side, the anchor hook on the floorcame loose when buckling up in the seat.

Seat belt failed.

Constant frontal seat belt failure.

Middle seat automatic belt on the passenger side that hooks to floor or side of van keeps coming unhooked. Please describe details.

While driving the center seat/right side seat belt anchorage, releases when belt is being used.vehicle has not been taken to dealer for problem.

Seat belt anchorage failure , the middle seat on the rights side seat belt, the hook detachedfrom the floor anchor.

Seat belt anchorage failure, the middle seat belt anchorage, clip comes unattachedwhen belt is put on or when driving, also talked to dealer, no replacement.

Driver and passenger seat belt latches came loose, please describe .

#ea97005, "hook"- center seat, right-side,safety belt achorage releases frequently when belt is in use. Problem not corrected.

Seat belt clamp disconnectsthe floor's hook.ea 97 005.

Passenger's middle seat belt separates from its floor mounting.

Middle floor mounted seat belt separates from the frame. Could cause injuries to occupants.tt

Center seat/right side safety belt anchorage releases frequently when the belt is in use.

The seat belt comes undone very easly and the metal is broken off (ea 97-005).

The passenger's seat belt on the middle row frequently comes loose from the floor bracket. Discussed numerous times with a dealer and bracket replaced once. Problem still exists.

Spring clip is broken and is not lined up properly.

The drivers seatbelt will not pull out. It has been repaired once a year ago. Please explain.tt

The vehicle's back/middle seat right hand side seat belt anchorage comes loose when using the belt, could preventfrom protecting the occupant in the event of an accident.

Middle seat belt comes unhooked,will not stay attached(ea 97-005).

The seat belt on the right side in the middle of the vehicle, the hook disengages from the metal floor anchor.this problem occurs while the vehicle is in motion and while the seat is being occupied. The spring clip is broken and has not been replaced by the dealer. Please add any further details.

Seat belt comes undone where it anchors to the floor (ea 97-005).

Driver and passenger seat belts broke .

Ea97005, safety belt anchorage failure, safety belt releases frequently when belt is in use. Vehicle was purchased inmay of 94. The spring clip is not broken.vehicle not seen by dealer.

Center seat/right side safety belt anchorage releases frequently when the belt is in use.

Center seatright side safety belt anchorage releases frequently when the belt is in use.

Received recall notice in mail (#97v149000) for seat belt anchor/attachments. Took vehicle to dealer. Was informed by mechanic, not able to perform work due to being busy. Did not know when time would allow to work on vehicle for recall of seat belts.

Vehicle's middle seat belt broke at the spring clip,the dealer sawit and estimatedit would cost $600.00o to fix it. It occurred about 6 months ago and still not fixed.

The right side/center seat belt anchorage releases when seat belt is being used.

Rear middle right side safety belt,where anchored to floor , releases while in use.no injuries, according to dealer, entire system needed to be replaced.

Owner states that her seat belt attachment comes loose while driving. This is the spring clip area of the middle rear seat. Owner is very concerned for safety. Investigation no ea97-005.

Center seat/right side safety belt anchorage releases frequently when th belt is in use.

The seatbelt from the center row seat detaches from the floor.not able to use.

Middle/rear safety belts are mounted backwards. Therefore, they will not stay latched,and that this has been an ongoing problem.

Safety belt anchorage failure, safety belt anchorage releases frequently from the floorboard, when belts are in use in center seat/right side. Consumer has yet to contact the dealer.

Ea97-005, safety belt anchorage failure. Safety belt anchorage releases frequently when belt is in use. Vehicle purchased in mar of 92. The spring clip is not broken.dealer has not looked at problem.

Ea970005, safety belt anchorage failure; safety belt anchorage releases frequently when the belt is in use. Bought in march of 94. The spring clip is not broken. A dealer has looked at problem.

Seat comes undone,which has been an ongoing problem since purchasing the vehicle.(ea 97-005).

Seatbelts spring clip from the middle bench seat detaches from the floor. Difficult to reclip the seatbelt.

Middle seat belt comes unhooked from floor while being in use. Took to dealer & they rehooked to floor. The problem had reoccurred. Since buying vehicle has happened each time.

Vehicle's middleseat belt spring clip broke and is inoperative. Dealer estimated it would cost $600.00 to fix it,still is inoperative.

Seat belt clip on the right middle passenger's sidethat attaches to the metal floor anchor has broken.please give any further detail information.

Seatbelt retainer clip was repaired but is loose again.

Seat belt anchorage, the middle seat belt anchorage clip detached when buckling up or while driving.

Center seat/right side safety belt anchorage releases frequently when the belt is in use.

Seat belt on right side of middle seat becomes detached from floor hook (ea 97-005).

Seat belt anchorages: center seat/ight side safety belt anchorages releasewhen in use. Seat beltis not anchoredto the floor.

Noticed one day that the seat belt was off the hook, rehooked it and it came off again,it does not stay hooked.

The right side/center seat belt anchorage releases when seat belt is being used.please provide details.

Seat belts failed.

Lap/shoulder on rear seats,loose seat belt that attached to the floor comes apart while driving.

Seat belt comes apart from the floor attachment. Ea97-005.

Middle seat belt comes detached from the floor attachment.

No summary listed for above vehicle.

The hook that hooks to the floor unhooks byitself and comes off (ea 97-005).

Center seat right side safety belt anchorage releases frequently when the belt is in use.

The middle rear seat belt anchor become detached from the floorboard when seat belt was in use.the clip is not broken. Consumer has contacted the dealer, dealer has yet to replace any parts.

Owner states that the seat latch for the middle rear seat is faulty.she notes that the spring clip is bad. Investigation no.ea97-005.

Middle seat belt on the passenger's side by the sliding door which is swtichable has come loose from the clip.

Lap/shoulder on rear seats,loose seat belt that attached to the floor comes apart while driving.

The clip that allows to change the seat belt position from the floorto the side wall on the middle bench seat pivots,came unhooked. Problem has not been corrected.

While driving the center seat/right side seat belt nchorage releases when the belt is in use. Dealer has not look at vehicle for problem.

Middle seat belt comes loose from the clip.

The rear middle seat belt broke where the rivet connects to the metal latch which connects to the floor anchor.

Center seat/right side safety belt anchorages releases when the belt is in use.

Consumer states that the safety belt anchorage releases frequently from the floorboard, location middle/center seat. Consumer also states that the clip is not broken. Consumer has yet to contact the dealer.

Vehicle's spring clip is broken and seatbelt is misaligned.

Ea97005, safety belt anchroage failure. Safty belt anchorage releases frequently when belt is in use. Vehicle purchased in oct of 95. The spring clip is not broken. Dealer has not looked at problem.

Seat belt from the middle bench seat detaches from the floor.

Seat belt anchorage failure, the middle seat belt on the right side anchorage disconnected from anchorage,hook clip broke.

Passenger shoulder/lap belt on side of middle seat comes unlatched from floor board where latches to floor board; occupants become unrestrained.tt

Seat belt in right rear will not stay clipped to floor or wall post. *sd

Owner states that while driving the seat belt attachment in the middle rear seat becomes undone,belt flies around in vehicle due to a faulty spring clip. Dealers had reinverted the spring clip, but problem returned. Investigation no.ea97-005.

Seat belt becomes loose detaches from floor. This is in the middle row bench seat.

Ea97005, safety belt anchorage failure. Safety belt anchorage releases frequently when belt is in use. Vehicle purchased in march of 95. The slip clip is not broken. Dealer stated that clip looked fine.

Ea97-005, safety belt anchorage failure. Safety belt anchorage releases frequently when belt is in use. Vehicle purchased in nov of 91. The spring clip is broken.dealer has not looked at problem.

The clip on seat belt in the middle row on the right side keeps coming unhooked from the anchor.please descirbe details.

Ea97005, safety belt anchorage failure. Safety belt anchorage releases, frequently when belt is in use. Vehicle purchased in aug of 94. The spring clip is broken. Chrysler dealer has looked at vehicle. Too expensive for consumer to replace clip.

The second row end seat unlatches whentouching or pulling the straps. The straps will disconnect ,allowing the straps which holds the passenger in the belt to unlock . 8ak

Ea97-005, safety belt anchorage failure. Safety belt anchorage releases frequently when belt is not in use. Purchased vehicle in feb of 92. The spring clip is not broken. Dealer is aware of problem. Problem has not been corrected.

Cannot use seat belt because it swings and doesn't stay hooked.

Centerseat/right side safety belt anchorage releases frequently when the belt is in use.

Seat belt attachment on the floor keeps coming apart.

Mr. Mineo has avoided the seatof the middle row right side due to the fact that the belt always has released the occupants. The clip has not been broken.

Center seat/right-side safety beltanchorage releases frequently when th belt is in use.

Center seat/right side safety seat belt anchorage releases frequently when the belt is in use.

Center seat/right side safety belt anchorage releases frequently when the belt is in use.

Owner states that his seat belt in the middle rear becomes unhooked.he aslo notes that the spring clip is faulty.investigation no.ea97-005.

Driver and passenger seat belts broke .

Ea97005, safety belt anchorage failure. Safety belt anchorage releases frequently when belt is in use. Purchased vehicle in oct of 92. The spring clip is not broken.dealer has not looked at problem.

The middle seat belt on the right side came unhooked from the anchor on thefloor,cannot let the children sit there.(ea 97-005).

Center seat/right side safety belt anchorage releases when the belt is in use.

Owner states that she has problems with the spring clip area where the seatbelt attaches for the middle rear seat.she also notes that she has not taken vehicle to dealers.

When using the second row on the right the anchor on the floor comes undone from the floor.please describe details.

Seat belt comes detached from floor, middle passenger seat. Ea-97-005.

Seat belt clipattached to floor broken. *sd

Seat belt anchorage, the middle seat on the right side, anchorage clip came loose from floor.

The middle right side seat belt comes loose from the floor anchor.

Seat belt anchor clip failed prior to recall notice requiring replacement of full seat belt unit.

Right side/middle seat belt hook releases and comes undone while vehicle is in use.

Ea97-005, safety belt anchorage failure. Safety belt anchorage releases frequently when belt is in use.vehicle purchased in june of 94. The spring clip is not broken. Dealer has not looked at vehicle.

Middle bench seat belt broke.

The seat belt anchor of the second row on the right comes undone when in use. Please describe details.

Middle seat belt buckle comes detached from the floor attachment.

The center seat/right side seat belt spring clip broke, causing the anchorage to release when trying to use belt. Please provide details.

The vehicle's rear middle/right side seat belt anchorage comes loose when wearing the seatbelt.making it impossible to protect the occupant in the event of avehicle accident (ea97-005).

Ea97005, safety belt anchorage failure. The safety belt anchorage releases frequently when belt is in use. Vehicle was purchased in may of 92. The spring clip is broken. Dealer is aware of problem.

Seat belts broken and not latching.

The vehicle's rear/center middle seat saftey belt anchorage releases when the belt is in use which won't protect the occupant if in an accident.

The seat belt in the middle rear becomes loosened while driving .owner notes that this occurs often.owner is very concern about the problem.

Middle seat belt unhooked from the floor . Ea97-005 investigation.

Seat belt clip from the middle bench seat will not attach to the floor. Inside the clip the spring has broken.

Panel where seat belt is attached has cracked.tt

#ea97005, safety belt anchorage failure. Safety belt achorage releases frequently when belt is in use. Chrsler is not aware of problem.

When vehicle is in motion, seat belt hook on floor comes undone when someone is using it in the middle seat. Talked to dealer & told to bring vehicle in.

Owner states that middle rear seat belt spring clip became unhooked and broke.owner is concerned about her safety.investigation no. Ea-97-005.

Owner states that her seatbelt attachment in the middle rear dose not stay latched. She also notes that the spring clip is defective.owner is very concerned for her childrens' safety. Ea97-005 investigation.

The seat belt on the right side in the middle of the vehicle, the spring clip that attaches to metal anchor in floor broke,causing the seat belt to become inoperative. Dealers would not replace the spring clip withouta $100.00 charge.please give further details.

The seat belt from the middle seat comes out of latch/clip.

Center seat/right side safety belt anchorage releases when belt in use.

Driver's side seat belts and also the rear seat belts work with difficulty, the belts dont lock properly.

Drivers seat belt lock mechanism appears to have popped out of its molding. Explain in more detail.

The vehicle's rear seat belt buckle broke and became inoperative,will not protect occupant if in accident.dealer will not replace seat belt buckle because of milage.

Seat belt buckle would not properly engage and the release button would occasionally eject past the cover, consumer states this was under a recall, dealer inspected seat belt, made no repairs, and charged consumer for the examination. *yd

The drivers side seatbelt buckle will not remain latch.

Driver's seat belt buckle fails to latch properly, also belt is not long enough to accomodate pregnant women.*skd

Middle seat belt latch broke 8 times.

Seat belt unhooks from the floor.

Driver's seat belt buckle disconnected due to release button becoming stuck in the down position.*skd

Driver's side seat belt release button remains stuck after pushing to release seat belt from buckle.

When attempting to insert latch into buckle, owners have problems unlatching, jamming either situation.tt

Driver and passenger seat belt latches came loose, please describe .

Driver seat belt buckle latch disconnects at times.tt

Drivers seat belt lock mechanism appears to have popped out of its molding. Explain in more detail.

Driver seat belt latch failed, resulting in driver being thrown through the windshield in an accident.tt

Vehicle was included in recall #97v149000 which involved the seat belt system.consumer is concerned that the dealer did not complete the entire recall remedy.please give any furtherdetails.

Seat belt latch failed.

Driver's seat belt buckle red button does not come back up when released; in event of accident, occupant could be trapped inside vehicle.tt

When trying to buckle up,the latch does not stay latched,it comes off the hook (ea 97-005).

Consumer received recall 97v-148 for the seat belt buckles but is still waiting for parts, the dealer informed the consumer that the recall would cost $190.00 and that he'd call when the parts came in, the customer has not heard from the dealer.

Driver's side seat belt latching mechanism is defective;buckle unlocks on its own,sometimes not locking at all; replaced under warrenty by dealer; problem has reoccurred.

The driver side seat belt buckle wouldn't latch. Please describe .

Driver's shoulder/lap belt buckles inoperative, male won't go into female portion.

Bench rear restraintsonpassenger side will not engage or will not unbuckle.a recall has been issued onvehicle; howeverdealer will not repair because of bucket seats.

Front passenger side seat belt becomes unlatch by itself.tt

Failure of the front passenger side seat belt retractor, seat belt retractor is locked in the retract position.

While driving another vehicle ran red light & broadsided voyager. The rear seat belts holding child safety seat failed to restrain it. The child safety seat flipped over & hit rear of front seats. Child seat was faced rear at time of impact.

The seat belt on the driver's side is stuck in the retractor mechanism. Dealer is aware of problem. Problem has not been corrected.

The driver side seat belt retractor is not retracting hard enough .tt

Seat belt on sliding door will jam.

Driver seat belt retractor grabs, therefore not allowing the seat belt to be used, replaced once, need replacing again.

Seat belt will not retract.

Passenger's middle seat belt retractor would not release to be used.it will retract back to original position .

The passenger's side seat belt release button jams while driving and the seat belt will pop out,the release button and the seat belt will come unattached.

Shoulder harness failed to lock in accident.

Seat belt clips in middle back seats are continually breaking.

Rear middle seat belt is inopeative,it disconnects.

Seat belts in middle seat has broken.tt

The seat belt in the middle it does not work.tt

Rear seat belts, when pulled on firmly,unlatch, also the beltsare not long enough to fastenchild safety seats.

Seat belt failure, in middle seat.tt

Right captain chair anchor clipped to bottom of shoulder strap near middle sliding door broke.tt

The driver's seat is broke it in the reclining position .

The driver side seat moves when driving .tt

Driver's seat slips out of position occasionally. *dh

Consumer states that while driving the the second seatback broke off from the anchorage.the dealer has been notified.

Driver's seat back broke.

While driving the driver's seat will go out of position and slide back,disabling the driver to reach the brake or accelerator.

Rear liftgate opened upon impact; vehicle rearended by another vehicle, low speed; bent bumper; knocked rear seat out.tt

Driver power seat broke from the frame on one side, resulting in uncontrollable movement.tt

Seat latch failed.

Driver's side seat back collapse while driving the vehicle.tt

Bolt that holds the back rest ofdriver's seat broke,causing the seat to collapse backward while driving.dealer has been contacted.

Driver side seat goes in recline position and the seat falls backwards.tt

Driver's side seat failure, recliner mechanism failed, seat will not stay in upright position.ttconsumer states that seat appears to be locked in the upright position and without warning will recline, dealer insists that consumer is responsible for the part and labor.

Driver's seat falls back.

While vehicle was at stop light it was rearended by another vehicle traveling 60 mph.neither air bag deployed, and driver's/passenger's seatbacks collapsed backwards upon impact.

While driving down highway another auto turned in front of voyager,causingit to side swipethe other vehicle. Air bags did not deploy, and the seatbackbroke.

Seat belt in middle seat of minivan will not stay connected to its mounting on the floor.

The contact owns a 1992 plymouth voyager. The contact stated that the brake system failed. The brake pedal stuck to the floorboard while driving approximately 40 mph and the abs warning light illuminated. The vehicle was towed to an independent mechanic where it was diagnosed that the motor pump assembly failed. The vehicle was not repaired. The manufacturer advised that nhtsa campaign number: 96v099000 (service brakes, hydraulic) was performed and the lifetime warranty for the motor pump assembly expired. The failure mileage was 95,000.

Abs multi-function switch replaced.

Owner requests refund for abs repairs.

The contact owns a 1992 plymouth voyager.the contact discovered a recall pertaining to the abs in his vehicle and took it to the dealer.he was informed that they were not warranting the repair.in 2003, the contact experienced brake failure and was informed that the repair was made under warranty at that time.the failure and current mileages were 11,800.

Maintenance reqd light came on, brake light came on, 15 minutes later no brakes, switch and pump need to be replaced.

Brakes failed 15 minutes after warning light came on.

The contact owns a 1992 plymouth voyager. The contact received notification of a recall under nhtsa campaign id number: 96v099000 (component: service brakes, hydraulic: antilock) and had repairs performed by the dealer. Following repairs, the anti lock braking system and brake warning lights remained illuminated on the instrument panel. The dealer advised the brake actuator piston assembly and the pump motor assembly would need to be replaced. The vehicle has not yet been repaired. The approximate failure and current mileages were 138,000.

While driving brakes failed, as a result,vehicle was totaled. Dealer notified.

Vehicle expeeriencing brake failure due to dual function switch in abs system malfunctioning.dealer notified and repair was made.

While driving down hill ice on hwy, apllied brakes abs light came on, brakes became very hard, replace pump and valve, ea94-028 active.tt

Consumer was driving try to stop the abs anti lock brake system fail almost hit a car and the rear hatch latch came open twice.tt

Abs braking problems.please describe.tt

Traveling at normal rate of speed abs light came on and suddenly brakes went out.tt

Several components of the abs failed, including "tone rings" on front axle.

The abs brake pump has gone and has caused the vehicle not to stop in a reasonable distance. Please describe.tt

Abs, brake failure loss effectiveness while driving, in for repair a new abs system, ea94-028 active.tt

When driving has to use excessive pressure to stop vehicle,has taken vehicle in several times,dealer indicated that there was no problem, even though she is still experiencing the same problems with the brakes.consumer experienced problems prior to recall 96v099, after recall repair, problem still continue.

Abs system failed, had pump replaced.abs warning light keeps coming on.tt

The vehicle has been in the shop 8 times for the abs system failure.the brake pedal changes resistance. Please describe.tt

Brake and warning light came on, abs brakes failed, resulting in significant loss of braking ability.tt

Abs controller failed causing light to illuminate. Mjs

Antilock brake pump failure.

Received recall notice in 1996 for abs. Did not take vehicle in for repairs because did not get the letter from his wife until 1997.had accident on 6-12-97, was driving approximately 50mph when abs light came on; lost control of vehicleand ran into an embankment, recall #96v009.

Abs brakes fails to stop vehicle effectively when applied causing extended stopping distance/inoperative at 30 mph, also abs light came on.tt

Anti-lock brake pump failed, causing brake fade/vehicle to pull to the right, also brakes intermittently slip.*skd

Brakes were under recall & were repaired.failed after being repaired, and consumer had them repaired again. After 2nd repairs, while driving and upon attempting to stop, brake pedal went to floor, and vehicle had no brakes. It swerved to miss hitting child & hit a parked vehicle. Dealer offered to repair brakes, again, for third time,forfree.

Abs: total anti-lock brake failure; applied brakes with no effect; abs warning light came on after braking; vehicle was repaired and sold.tt

At 24,226 miles the whole brake hydraulic unit failed.tt

Vehicles abs barking system lights come on and when depressing pedal becomes hard.having long and extended stopping distances.(ea94-028).tt

Applied the abs brakes and there were no brakes,pedal went to the floor, causing two crashes; first collision occurredbefore receiving the recall letter and second collision happened after the vehicle was fixed.please describe .

The brakes went completely out and they had to coast into a parking lot. The vehicle has abs brakes. The system needs to be replaced. Please describe.tt

On 8/19/02 i took my plymouth voyager to normandin chrysler dealership. After 3 attempts, and close to $900.00, my brakes have continued to fail. Some of the parts are factory recalls, but they say that the booster pressure transducer continues to fail. I would like some help and/or advise on what to do. I do not want to take my vehicle back, neither would i like it to be towed for the third time at my insurances expense. Thank you, [xxx].parts of this document have been redacted to protect personally identifiable information pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6).

Received recall notice 96v099000. Contacted dealership for appointment. Took vehicle on date given for abs brake repair. Less than a year later, the abs brake had problems. Contacted mfg & informed would charge for corrective solution for abs brakes. Owner feels mfg should pay for total cost of repairs.

Antilock brakes failed. *sd

Ea94-028 active, abs, when brakes are touched or applied vibration in the front end.tt

Abs braking system failed with warning lights on, prior to pedal failure/soft.

Poor brake performance, requiring excessive force to stop vehicle. *dsh

While driving, brake & abs light comes on intermittently, extending stopping distance, due to inadequate braking ability when pedal becomes soft.tt

Vehicle experienced failure of the abs system prior to recall notice and repaired, recall work later completed however system still experiences intermittent failure (96v-099). Mjs

Abs anti-lock brake failed .

Ea94-028 active, brake failure loss of brake effectiveness pedal goes to the floor, in for for repair 6 times.tt

Anti-lock brakes failed twice.

Vehicles abs braking system hydraulic assembly failed, causing leakage prior to failure, a buzzing noise was heard.

Roche chrysler plymouth recall 96v099.dlr., doesn't have the parts. Zone office states parts have been ordered but none have been received at this time.

Consumer states that the abs brakes systemdoes not work properly,if one wheel should slide,it releases the brakes on slippery or dry pavement.

Abs braking system has failed intermittently having extended stopping distance.tt

Abs: anti lock brake warning light came; within 2 blocks, total brake failure; told by dealer, pump was leaking; repaired; still experiencing brake problems.

Owner has abs brakes, abs brakes failed twice andwere repaired twice. Owner notes that she has had two accidents in result of brake failure and is very cocerned about the safety of this vehicle.

While making a sudden stop abs brakes locked up, vehicle slid into vehicle in front, resulting in rearend collision.

While driving on the highway the abs system has failed.please describe.

Vehicles abs braking system had complete failure both warning lights came on.tt

Abs system failure, entire abs brake system had to replace twice.tt

When stepping on the brake pedal abs light would came on, andvehicle would experience extended stopping distance.

Abs system failure, total loss of braking ability. Replaced pump/motor assembly.tt

Abs: entire anti-lock braking system went out; driving down slight incline, applied brakes; pedal went to floor.tt

While traveling and when depressing the brakes vehicle continued to travel, causing drivertodepressbrake pedal all theway to the floorboard to stop vehicle.please provide further information.

When driving at any speed the abs system light is on, and the abs system is kicking in.it is not stopping the vehicle, but slowing the vehicle down.

Abs brakes warning lights continues to come on, loud noise, soft pedal and fails to stop vehicle effectively when applied. Repaired 3-4 times. Describe details.

Abs system failure, dealer replace abs brake pump twice within 18 months, abs warning lights come on, experienced loss of braking.tt

The brakes were repaired under recall# 96v099000 in august 2001.the brakes were intermittent after the repair and now the brakes are not operating at all.the dealer will only do the repairs at the owner's expense because the brakes are out of warranty.the dual function pressure switch repaired the power to the pump.the accumulator was needed for it to maintain the correct pressure.the dealer did not complete the recall.no repairs were found in the abs wiring. *scc

Abs light came on then abs brake system failed during regular stopping; needed to use both feet. Tt

Recall 96v099000 repairs for anti-skid system was performed a year ago, last winter 2001. System has failed again with emergency light illuminating and lengthy braking necessary.please describe details.

Abs: anti-lock brake light came on at same time; applied brake; received no response; managed to slow down, eventually stopped;with use of parking brake

Anti-lock brake pump and relay failed three times, causing brakes to fade.*skd

Abs system had to be replaced twice because of failure.tt

Abs brake failure.

The second failure occurrence following manufacturer,s recall, and dealer repaired (system accumulator).driver again experienced illumination of brake and anti-lock lights, and subsequent total failure of the brake system at slow speed.the brakes pedal felt completely normal to touch, however no hydraulic pressure appeared to reach the actual vehicle brakes for stopping.

Vehicles abs braking system was having extended stopping distances.with brake fluid leakage was occuring.tt

Abs brakes went out without warning.tt

Abs braking failure.tt

While driving on the highway the abs braking went out. Please describe.

Abs brakes failed to stop vehicle effectively, causing extended stopping/inoperative. Tt

While driving on two occasions experienced abs failure, light comes on, pedal becomes hard then goes to floor.tt

Abs brake light comes on periodically and goesoff within 5 minutes, replace abs connector.

Abs braking system intermittently has loss of pedal pressure and has extended stopping distance.(ea94-028).tt

Antilock brakes failed. *aw

Driving car on pacific coast hwy, abs brake light came on, touched brakes, felt like rock, did not depress, used both feet, car finally slowed, then stopped. Consumer also had front brake service performed.

Prior to recall 96v099 vehicle had not experienced any abs problems, after taking vehicle into dealer for the recall the vehicle began experiencing numerous abs alerts and loss of braking.nlm

Recall states dealer will repair and not charge for parts. Dealer wants to charge for parts.

Needs to apply extreme pressure on abs brake system to havevehicle slow down. Contacted dealer.

Abs sensor light keeps coming on intermittently. Vehicle was taken to dealer for nhtsa recall # 96 v 099 000. Dealer informed consumer of a code needed to correct the problem. Consumer would like to know ifthis isproper procedure.

Abs: anti lock brake light keeps coming on, remains on, this problem could cause abs brake failure.

Abs system failed.

Prior to recall 96v099 vehicle had not experienced any abs problems, after taking vehicle into dealer for the recall the vehicle began experiencing numerous abs alerts and loss of braking.nlm

Attempted to brake, pushed pedal to the floor, abs brake pump was replaced.tt

The truck has the abs system. When brake was applied the system kicked in and the brake pedal was hard. Please describe.tt

Vehicles abs braking system failed 20-25mph with normal application.pedal went to floor with lock-up.no warning prior to failure.(ea94-028).tt

When traveling and upon depressing the brake pedal,the pedal traveled to thefloorboard, causing extended stopping distance and brake fade away.consumer has contacted the dealer, dealer has yet to correct the problem.

Anti-lock brake system failed while driving at 10 mph, brake pedal was hard/took approximately 100 ft/yards to stop vehicle.

Brake light turned on whilevehicle was being driven. Brakes did not operate. Vehicle was taken to dealerfor repairs three times, but the problem recurred..

When abs engage vehicle takes a long time to stop, pedal hard, brake light comes on.tt

Purchased in 1992 had the abs anti-lock brakes replaced about three times, car in shop to be replaced again .

Abs system failure, abs system indicator light turns on while driving.tt

Vehicle had abs braking system failure and hard pedal with no prior warning.light comes as failure occured.(ea94-028). Accumulator and pump failed.tt

1.brake system failed completey.serious accident narrowly averted.dealer replaced component but serious risk exists for similar vehicles.could cause fatal accident.recall should be sought.2.the metal decorative covers on the bolts which hold the wheels to the wheel assembly become loose and fly off the vehicle when moving creating a serious missile hazard which could cause an accident by striking a pedestrian or another vehicle, especially any windows.

Abs brakes failed. *tw

Abs indicator lights comes on, total loss of braking ability.tt

Vehicles abs braking system is not stopping car causing long and extended stopping distances.(ea94-028).tt

Abs failed had to have replaced.tt

Anti-lock brake failure.

While driving applied brakes and brake pedal went all the way out.dealer replaced the abs pump, consumer states she has alway has problems with the brake lights and brake pedal, everytime the vehicle was looked at by a dealer, they always responded that there was no problem.

The abs and the brake light stay on for a period of time after the vehicle is started. The pump was having problems building up pressure.tt

Anti-lock brake pump failed, causing loss of brakes/control.*skd

The brake pedal became hard when applied.*nlm

Abs brakes fail continually.

Consumer has had recall 96v099 repair complete on vehicle however, the abs system has failed again and the consumer was charged for the repairs.

Received recallnotice (#96v099000). Notified dealer. Took vehicle in for brake repair on date given. Had no parts. Took to second dealer.

Antilock brakes failed three times.*aw

Abs failure/ warning light illuminated accompanied by continuous buzzing. *tw

Abs brakes fail to properly stop vehicle, causing extended stopping distance. Tt

While driving the emergency light came on and within minutes abs brakes were gone, was lucky no accident.

The vehicle has abs brakes. When the brake is applied the vehicle will not stop. Please describe.tt

Uponreceiving recall91v170000for brakepedal failure car was alreadyin shopfor absproblems.when trying to press brake pedal,it would not move, it just stuck. This problem has happened several times onseptember 28, 2000. On august 30, 2000put drums and pads, still didn't fixproblem. Consumer was driving and making a turn,andabs light and brake light came on at the same time, indicatingno brakes. Consumer almost went over an embankment.

Vehicles abs braking system became completely inoperative while driving.the complete hydraulic system had to be replaced.(ea94-028).

Abs warning light came on and pedal got hard, experience long stopping distance, replace hydraulic control.tt

Whenbrakes were applied under normal conditionspedal went to the floor, resulting in extended stopping distance.also,dealer replaced brake master cylinder.however,problem has reoccurred. Dealer will reinspect the vehicle.

Abs braking system failed with hard pedal,no prior warning was given.tt

Anti-lock brakes failed, resulting in extended stopping distance.

The contact owns a 1992 plymouth voyager.while driving 15 mph uphill, the brake pedal extended to the floor when it was depressed.the vehicle finally came to a stop 5 seconds later.the abs and brake warning indicator lights illuminated.the repair shop stated that the master cylinder was leaking fluid.the current and failure mileages were 70,000.updated 01-14-08.the abs pump was replaced. Updated

Ea94-028 active, replacement of the abs system, pump assembly.tt consumer also had belt tensioner replaced.

Vehicle experienced failure of the recall component prior to recall notice (96v-099). Mjs

Dt: the contact stated there was nhtsarecall 96v099000 involving the anti lock brakes.the vehicle was repaired accordingly to the recall.he felt though the recall repairs have not corrected the problembecause the vehiclecontinued to have anti lock brake problems. .there have been no further repairs due to the expense.

Abs braking system needed to be replaced on a reoccurring basis.dealer has replacedbrake components on several occasions, butwas unable to remedyproblem. Please provide further details.

Abs brake light comes on while driving. Dealer cannot duplicate.

The abs system hydraulic unit had to be replaced, the abs system stopped working during a sudden stop.tt

Abs failed at 23000 miles. Please explain the problem.

While driving applied brakes and theydidn't hold. Also,and anti-lock brakes didn't kick in.had to put vehicle in neutral gear, and put on emergency brakes. Had a lot of brake problems.

The abs system keeps flashing,the brakes sometimes goes off.tt

Abs brakes; abs light illuminates until taken to dealers.once cylinder replaced problem corrected. Tt

Abs system failure, abs indicator light comes on after starting.tt

Around 4/30/04 you sent us a vehicle owner's questionnaire. We filled out the forms and sent them back to you, but have not had a response back.the brake actuator piston & the pump-motor assembly have a lifetime coverage, but chrysler want us to pay for other parts not necessary to get more money from us.we believe if these two parts are replaced the brakes will work fine. Big a brakes agree with us, but we have not been able to get chrysler to fix the brake problem.we would like a response from you so we know where we stand on this situation.

Abs brakes; abs warning light illuminated identifying brake system completely failed/inoperative. Please describe details.tt

The abs system keeps flashing,the brakes sometimes goes off.tt

Abs light came on, had to have total brake system replaced.tt

When the brakes are depressed vehicle will not stop. Consumer claims that the brakes were fixed under a previous recall, but problem still persists.dealer insists that the problem is the hydraulic control unit.

Abs, brake failure, compelte loss of brakes , pedal went to the floor, in for repair for faulty sensor that connects to the wiring harness.

Abs controller failed, causing warning light to come on. *dsh

Antilock brake warning light sticks. *sd

Vehicle accelerated unexpectedly, causing unwanted accleration due to the throttle body which has malfunctioned and needed replacing. Also,chryslerno longer makes throttle body part. Frequent stopping caused the front brakes to over heat and go out completely.yh

Brakes failed.

Power steering tensioner belt broke, loss of power steering and brakes.tt

Brake failure.*aw

While driving, at approx. 20mph, make attempt to stop, brake pedal became hard and continued to roll forward, brake action seemed inadequate.tt

Brakes failed, causing loss of control.*aw

The vehicle stalls without warning, causing the steering to lock-up and the brakes to be inoperative.tt

Front brakes low due to pads/rotors. *sd

Brakes are mushy and experiencing extended stopping distance.tt

Front brakes relined.

Abs, brake failure of brake calipers and disc rotors and pads ea94-028 active.tt

Purchase truck new the spring in the front brake broke .tt

The rotor, pads and caliper were replaced purchase car used .tt

Brake pads failed.

Brake rotors failed.

Rotors failed.

The rotor, pads and caliper were replaced purchase car used .tt

While drivingapplied the brakes and the rear wheels locked up. The front brake did not lock up only the back rear wheel.

When applyingbrakespedal almost went to the floor due to a corroded rear brake line leaking brake fluid. Dealer has not seen vehicle. Owner replacedbrake line.

Weight fromspare tire is rubbing a hole inbrake hose, and it is making a hole in it.

My 1992 chrysler voyager has bendix 10 abs brakes and once the brake booster was out. Our local chrysler dealer made certain that the booster pump was burned out. While the pump was already replaced in 2000 they said the warranty covers only 1 pump per vehicle!! as i know recall 96v-99 (chrysler recall #685) refers to a lifetime warranty (for booster electrical pump). Short life, isn't it?

Brake light/anti-lock brake light come on in cold weather and then brake pump and accumulator were replaced 4 times.

Hydraulic brake pump failed, causing brake failure.*aw

There is already a recall for hydraulic boostsystem. But, vehicle has been at dealer three different times, and problem is still there.

Airbags did not deploy in broadside crash suspension is messed up steering wheel wobbles hard when turning engine failed 6 months after van was bought and scores of other problems

Scratching noise, like something rubbing, coming from the steering wheel area, recall in 1992, still have not solve the problem.

The contact owns a 1992 plymouth voyager. The contact stated while driving approximately 45 mph there was a loss of power steering without any warning. The steering wheel became extremely difficult to maneuver. The failure occurred intermittently. The vehicle was not repaired nor was the failure diagnosed. The manufacturer was not notified of the defect. The approximate failure mileage was 160,000.

The vehicle stalls without warning, causing the steering to lock-up and the brakes to be inoperative.tt

Steering wheel locked up while making a right turn at 15 mph. Vehicle towed to dealer,and informed consumer thatclock spring broke and causedwheel to lock up, andair bag light to come on.

While driving the steering wheel locked up, causing loss of power steering, making it very difficult to operate the vehicle while braking. Please provide further details.

Steering column locks up, causing the key not to shut off in the proper position. *sd

Recall work can not be completed due to lack of parts, steering wheel anti/sep plate.

Received recall notice (96v229000) for steering wheel armature cracks. Took vehicle to dealer. Service mechanic said did not have the time to repair vehicle under recall.wanted vehicle left, but it wasconsumer'sonly mode of transportation and could not leave it.

While pulling into a parking lot the steering wheel fell into the driver's lap. The bracket that holds the steering wheel was cracked all around.the steering wheel was loose a couple of days before this happened. Whole steering column had to be replaced. Please provide any further information.

Replaced anti-theft alarm.

Serpentine belt dry rotted and cracked; caused temporary loss of power steering.tt

Sudden power steering and water pump failure due to belt tentioner failure.tt

Vehicle has loss of power steering when driving through water.

Power steering problems. Ttconsumer states high pitched squealing moise develops.

Power steering belt tensioner broke; heard loud squealing noise; no steering problem.tt

The steering tensioner belt fractured and the power steering was lost in the car. Please describe.tt

Faulty belt tensioner caused power steering pump/pulley replacement. *dsh

Vehicle has had 2 replacements of steering belt tensioner, a/c, waterpump, and alternator.(pe95-012) phone number ext:310.tt

Gas filled support mounting bolt fractured; caused liftgate to fall pinning occupant between liftgate and vehicle; also, power steering belt tentioner failure.

Power steering belt tensioner failed, causing loss of power steering, difficulty stopping vehicle safely. *dsh

Power steering belt tensioner fractured, making steering impossible. *dsh

Steering belt tensioner broke while driving, dealer replaced belt and tensioner.tt

Power steering belt tensioner locked up, causing noise when turning. *dsh

Power steering belt tensioner came off.tt

The steering belt tensioner broke.tt

Failure of the steering belt tensioner sudden loss of power steering pe95-012.tt

Power steering belt tensioner broke.tt

Fractured power steering belt tensioner broke off.owner has defective part.tt

Had to replace power steering belt tensioner three times pe95-012.tt

Steering belt tensioner broke causing the loss of power steering.ttpower brake and electrical system also failed when belt tensioner broke.

Power steering tensioner fractured, loss of power steering.tt

Failure of the steering belt tensioner fractures pe95-012.tt

Power steering tensioner belt broke, loss of power steering and brakes.tt

Wihle driving on the highway the power assist belt broke with out any warning.please describe.

During certain operating conditions noticeable gap in power steering tension belt. Please describe other problems.tt

Power steering belt tensioner failed, causing loss of steering. *dsh

Sudden power steering and water pump failure due to belt tentioner failure.tt

Power steering belt tensioner failed twice, destroying serpentine belt. *dsh

Power steering tensioner bent/out of line, causing serpentine belt to come off. *dsh

The steering belt teinsioner was replaced once,after replacing the teinsioner the same day it started to burn and it needed to be replaced again . Please describe .

Steering belt tensioner made loud noises while making turns; replaced at 29,000 miles.tt

Steering belt tensioner broke while driving.tt

#pe-95-12. The steering belt tensioner broke needs to be replaced for the four time .tt

Steering tensioner extremely noisy. Please describe details.tt

Bolt securing tensioner drive belt sheared off twice.

Power steering belt tensioner broke, causing loss of power steering. *dsh

Power steering belt tensioner broke, causing power steering belt to fall off. *dsh

Power steering pump failed, causing tight steering.

Rack and pinion have been replaced twice. Please explain.tt

Rack/pinion failed. *dh

Notice hard turning right and left and a clunking noise,due to rack and pinion failure.tt

Power steering rack failed, causing tight steering.

Lift gate support washer failed, causing the lift gate support to come loose, putting a hole in the panel and head liner.

1992 plymouth grand voyager se has peeling paint. The peeling paint has caused windshield loose and has become a safety hazard (they're not supposed to come loose in a crash). The most recent windshield replacement has shown rust starting to form around the paint.

Recall 97v079000; contacted burnside motors on september 10, 1997 and are no parts.

Airbags did not deploy in broadside crash suspension is messed up steering wheel wobbles hard when turning engine failed 6 months after van was bought and scores of other problems

Warning chimes/inside lights intermittently fail when door is open with keys in ignition due to failed door switch.

The sliding door fell off.please explain.

The sliding door fell off the van a few minutes after being parked. The door has not been repaired.

Door handle on sliding door broke preventing entry/exit. Please describe details.tt

The sliding door came completely off.tt

Consumer shut sliding door when all power locks on all doors locked by itself, trapping infant inside the vehicle.vehicle was running at the time.

Sliding door rattles/noisy due to misalignment.

Sliding door falls off track repeatedly. Chrysler dealers diablo @ 2180 diamond blvd in concord, ca will no longer repair unless manufacturer pays for repair.

The door handle fell off while removing the packages. Explain in more detail.

Side sliding door came off when trying to shut door.tt

While driving on a 4-lane highway at speed, door on passenger's side opened due to outside door handle being stuck in open position.

Sliding side door fell off upon opening.tt

The dealer cannot fix the passenger door that doesn'tclose and i have little children who are at risk of falling out of the car while it is going...i need your input to the dealer baxter chrysler 1190 west dodge rd, omaha, ne 68154 to make them fix it as soon as possible...i know it is a 1992 plymouth minivan, but this defect should not go unattended by plymouth sor safety risks to children...please help...richard holcomb248 no 129th st, omaha, ne 68154-2110.

Half inch screws holding sliding door comes loose, rear portion of sliding door fellto theground.

The sliding door fell off while backing out of the driveway. Serviceman, who repaired door, indicated that roller was not heavy enough.

During vehicle operation the passenger's side door came open without notice, or effort from the passenger.

Purchase car new consumer was parked on a hill opened the sliding door it almost fell off .tt

While closing, sliding side door came off.

Looking for chrysler to pay for replacement of door hinge.

Rear door caught fire and burned as vehicle was being refueled.smoke could also be seen coming from the dash area.

Passenger door hinge weld failure, difficulty closing and opening the door.tt

Sliding door was coming off due toloose hinges. Dealer took the door off because of the loose hinges.

Metal stress where hinges are attached to the door skin.ttthe dealer admits the door had poor design but did not consider it as a problem. The consumer believes the door would be falling off.

Door hinges came loose while driving down the road. Has contacted dealer five times, and they still haven't taken care of problem.

Door hinges bent due to strong wind, causing the door to remain open 6 inches. *sd

Front door hem separated at 2 spot welds producing misalignment of door latch.

When trying to close the door it came off track. Dealer says a bolt needs to be replaced.

Passenger's side sliding door has completey disengaged fromthe hinges and tracks ,cause unknown.please give any further details.

Whenfront passenger's door was opened,hatch window blew out. Chrysler has been contacted.

Rear latch light and bell keep going off, indicating that door is open.tt

In accident went in 7:00 position rear hatch gate opened andall cargo fell out.tt

Rear door hinges came out, causingdoor to fall off.

Recall repair completed (97v-079), however the repair was not completed properly (backward) causing the lifthatch to break.*mjs

Support struts on the rear hatch doors failed.

Lift gate support rod collapsed causing injury to consumer prior to recall notice.

The rear liftgate right strut broke, causing serious shoulder/neck injuries.tt

Vehicle experienced failure of the recall component (97v-079) prior to recall notification, consumer is requesting reimbursement. *mjs

Liftgate hydraulic cylinder support rod bolt sheared off structure frame, rendering inoperative.

Vehicles rear piston hydraulic rod broke off and heavy rear hatch door fell down.tt

Rear door hydraulic support bar has come apart.tt

The defective rear door slid/collapsed due to corroded bolts which caused an injury.

Recall 97v079000 chrysler//liftgate support bracket; owner feels that the corrective action does not justify recall. The washer were replaced two years ago. Now the bolts need to be replaced because of breakage and the dealer is charging $162.00 to correct problem. Please provide any further information.

Bolt that fastened lifgate hydraulic cylinders to vehicle chassis snapped off 3 times, lift gate fell down, resulting in a wrist injury.

Liftgate bolts failed prior to recall notice which caused the liftgate hinges to snap also, this was the second time it failed, dealer refused repair free of charge.

Had received recall notice (#97v079000). Called dealer & took vehicle to dealership. Mechanic said could not do repairs of liftgate support bracket. Did not have the time & did not know when they will be able to get to it.

Hydraulic cylinder truck bolts broke, lift will not stay up.

Ea96027, the support for the rear hatch keeps breaking. The hatchback does not stay in the open position. The struts have been replaced (5) times within (5) years.

Rear right hydraulic lift bolt sheared off at the top, causing the prop to disconnect.

On 21 february 2003, the bolt used to attach the right strut to the body and the rear liftgate broke not allowing the rear liftgate to open. A review of recalls for my model of vehicle (1992 plymouth voyager) on the nhtsa complaints database disclosed recall # 97v079000. The recall summary advised that owner notifications began during august 1997. I was never notified of this recall.

The bolt that secures the gate to the frame of the vehicle broke causing the gate to fall and injure the driver. (attorney for client) yh

Gas filled support mounting bolt fractured; caused liftgate to fall pinning occupant between liftgate and vehicle; also, power steering belt tentioner failure.

Hydraulic arms does not hold liftgate up in extremely cold weather; fell down on head/shoulder and arm of owner; have experienced same problem with 1988 caravan

One of two rear hatch liftgate support strut mounting bolts sheared off, causing liftgate to fall off.

When open the liftgate,the cylinder crash through the headliner of rear of vehicle.tt

Liftgate support arm that holds up trunk broke. Arm sheared off and tore hole in roof.also,trunk lid fell, and hit consumer on head and arm.also, liftgate arms had been replaced twice through recall. Contact dealer, and could not get through.called chrysler and filed a complaint.when repair was made on july sixth, mechanic stated that the right liftgate was weak also, this right one was just replaced the month before.

The rear hatch support, the struts failed.

Hood locked up.manufacturer and dealer will be notified.

In 1996, we noticed some blistering on the hood of our van. By that same summer, the paint has begun to peel off. Since then, the hood is almost void of all paint and the paint on the roof has also peeled off and is rusting badly.after asking some casual questions concerning this, it was our understanding that nothing could be done and it was our loss.we now realize this is not true. After some research, we have found many complaints of the same and since there is is no class action against chrysler, we would like to proceed further to have this taken care of. If chrysler does not want to assume liability or a gesture of good will to have our van repainted, we are prepared to take this to small claims court.

Liftgate bolts failed/replaced prior to recall.

Liftgate hydraulic cylinder failed, allowing liftgate to slam shut. Thick bolt attaching side of hydraulic severed. Please describe details.

Liftgate support bolts and install larger washers on recall, dealer complains about no parts.

Tailgate lift arm failed.

97v-079000,chrysler only offered to pay half of the recall when tailgate supports broke off and injured one person.

Consumer took his vehicle for recall work on the lift gate support attaching bolts, dealer made no repairs, approximately 8 months later, the right side attaching bolt to the liftgate broke in half, causing the liftgate to fall unexpectedly.

The owner recieved her recall letter on locks and latches and set up an appointment. Later was told that the part has not been made 95i001000.

The consumer received a recall (95i-001) notice about left gate support bolts, consumer was informed by dealer to take vehicle to a body shop, consumer is requesting reimbursement.

Liftgate support bolts/washer recall repair not performed due to a lack of parts. (951001).

Vehicle is rusting out on both sides/rear. *dh

No summary listed for above vehicle.

Front transverse frame member broke causing a cracking sound as the vehicle moved and a slow speed oscillation in the steering.repair was made at a frame shop.it appears that my case was not an isolated incident.

Paint began to peel off from top and passenger's side.

Airbags did not deploy in broadside crash suspension is messed up steering wheel wobbles hard when turning engine failed 6 months after van was bought and scores of other problems

Struts failed.

Vehicle pulls to one side. *sd

Wobble in front end while driving. Dealer can not determine whats causing the problem. Tt

Front end shimmies. *sd

Rear wheel bearings failed.

Rear shocks failed.

Leaf spring broke while driving vehicle.tt

Left rear tire coming apart.

When making an emergency stop the vehicle wanted to spin out of control. This wa sdue to the vehicle being equipped with the original goodyear 14" tires. Replaced the front tires and vehicle behaved normally.

Airbags did not deploy in broadside crash suspension is messed up steering wheel wobbles hard when turning engine failed 6 months after van was bought and scores of other problems

Tires unbalanced, causing uneven tire wear.

Weight fromspare tire is rubbing a hole inbrake hose, and it is making a hole in it.

While driving about 65/70 mph tread on the rear driver side tire peeled off.driver did manage to controlvehicle. 4 other passenger's were in the vehicle. No one was injured.two weeks before this , tire on the passenger's front sidewas replaced because it warped in high heat.dot # hymoa9ao56.manufacturer was contacted about tire.atlas took care of half of the replacement cost on new tires.thepeeled off tire caused damages to the customer's vehicle. Tire size p205/70r15.

The upholstery and carpet are highly flammable. Please describe details.tt

Airbags did not deploy in broadside crash suspension is messed up steering wheel wobbles hard when turning engine failed 6 months after van was bought and scores of other problems

No summary listed for this vehicle.

Paint on roof peeling off also hood and side rear panel passengers side

When driving at any speed theodometer/speedometer malfunctioned,and consumer wasunable to use the cruise control.

Right rear wheel speed sensor failed, causinganti-lock brakes to fail intermittently.

During normal operation destination speed increased up to 70mph.cruise would not return to resume postion during brake application.

Sudden acceleration, causing accident.*aw

Was driving and vehicle accelerated due to throttle sticking.

Speed sensor failed.

Accelerator stuck causing engine to fail.

Accelerator cable and the cruise control cable stripped, causing vehicle to engage in a forceful speed and hold. These are not typical wear and tear and should not happened.had to replace both cables.

The accelerator cable keeps coming loose,replaced it and it is doing the same thing . Please describe .

Sliding door window broke without any type impact on the window.tt

When vehicle are parked rear window on hatch will explode if their is a weather change hot/cold.tt

Consumer was driving approx. 60mph whenside rear window of driver's side exploded.splattering glass to the inside of vehicle.

In very cold weather the rear windshield shattered upon turn on the defroster.

Drove vehicle to work , put vehicle in reverse to park, heard a loud noise the entire glass in the rear had shattered completely.

While driving 70mph rear window fell out.

While the vehicle was turning off the back window exploded from the inside,could cause injuries to an occupant in the rear seat.

The vehicle was parked and the liftgate window shattered. The manufacturer has been contacted.

While driving about 15 mph the left back window shattered, reason unknown ! . Mcp

During cool to moderate temperatures windows sponaneously shattered. Second incident 1/21/96.tt

While driving 70mph rear window fell out.

1468 ea 92 033/ rear window shattering. Reporting on two occasions rear window had shattered for unknown reason; 1. Noticed shattered glass inside of vehicle, and another time window just shatteredwhile driving. Dealer notified, and consumer was informed that no recall was on that vehicle concerningwindow shattering.seeking help on this matter because this was the second time rear window was replaced. But, replacement was at consumer'sexpense, and dealer/manufacturer refused to help on both occasions. This is a manufacturer's defect.

Power mirror motor inoperative. *sd

Was using rearwindshield wiper when it stopped working without warning.motor was continuing to run, but not the wiper. Contacteddealership & was informed that wiper could possiblebe replaced due to recall on left pivot.

The back windshield wiper is not working, stuck in middle .will begin to move slightly on occasion. This defect can result in an accident.

After rear wiper failed, i pulled the fuse because it sounded like the motor wanted to keep running in rear and was afraid it could cause motor to burn out and possible fire hazard.i learned, however, fuse also connected to airbag.

Rear windshield wiper is stuck in the middle of the window.problem has not been reported to the dealership. Please provide any further information.

Rear windshieldwipers stopped operating.dealer/manufacturer were not notified at this time.feel free to provide any further details on this matter.

While driving about 30 mph back of windshield fell off vehicle with the frame and rubber.

Left rear window exploded.*skd

Regulator on driver's side window failed.

Rear windshield wipers froze in a storm . When they were needed they did not come on.

Windshield wipers would go up and over to side to side mirror,after being turned on. Would stop vehicle to remove wipers. They would fail to operate. Contacted dealership & then manufacturer, but wipers not on recall. Will have them repaired.

Windshield wipers fail intermittently.

While driving the windshield wipers cut off.owner has had vehicle repaired.

Windshield wiper failed, unable to replace due to back order on parts (2 months wait). Mjs

Windshield wipers are not operable.they work intermittently.

The windshield wipers were on high and the driver's side wiper went over to left and wrapped around the mirror on that side.

Wiper blades failed.

Windshield wiper arm breaks, and it can fly off the vehicle into path of another vehicle.

Windshield wiper arm disconnected from the frame during rainy weather.tt

Pe97-013,while driving the defective windshield wipers are inoperative which can cause an accident. Dealer says it needs a new windsheild motor and arm.

The back windshield wiper is not working, stuck in middle .will begin to move slightly on occasion. This defect can result in an accident.

Airbag light came on dashboard continuously and stayed on, andright windshield wiper blade came off it completly, broke off.

In bothcases the wipers failed when i was simplydrivinginlightsnow/rain withno extraordinary stress on the wipers.

Windshield wiper failed, unable to replace due to back order on parts (2 months wait). Mjs

Leakage of rear windshield wiper washer reservoir overflowed underneath carpeting.a severe mold formed and infested all upholstered interior components including seats, carpeting, side panels, and headliner.these items could not be cleaned.the resultant odor caused occupants to have respiratory distress sufficient to require prescription medications.

Windshield wiper failed, unable to replace due to back order on parts (2 months wait). Mjs

Windshield wiper arm breaks and it can fly off the vehicle in path of another vehicle. Owner claims was told by dealer that wipers were designed to break.

While driving in new hampshire downpour, left wiper swept off windshield and stopped, driver had to pull off the road and put head outside window to continue trip.

Windshield wiper pivot failed.nlm

Dealer stated that consumers vehicle was not included in recall campaign no 836 for the left hand wiper pivot drive arm.nlm

Right rear windsheild wiper motor froze causing wiper inoperable.yh

Windsheild wiper blade motor failed on the rear lift gate.

Rear windshield wiper motor is inoperative, causing poor visibility in rainy weather conditions. Wiper arm was frozen on the wiper motor shaft and had to be cut off to remove it.

Windsheild wiper blade motor failed on the rear lift gate.

The motor of the windshieldwipersbroken off, causing a malfunction in the wipers , allowing them to go in different directions. Dealer has seen vehicle.

Defective left windshield wiper came out of the pivot, and caused the wiper to be inoperative, which resulted invisibility problems, and maycause a crash.there isrecall 99v189, but this vehicle is not included in the recall due to vinalthough it deals withthe same problem.

Rear window wiper motor failed.

When turning on the rear windshield wipers they stop working in up position ,and never work again.

Problem with wheel drums caused vehicle to pull to right.*aw

Over the years that i have owned this van, i have had to replace the hub caps at least six times.it is obviously a poorly designed wheel covering as in addition to my own experience, i have noticed many many other plymouth vans that are missing their hubcaps.i believe that chrysler should be required to provide new hubcaps and to find a way to make them stay on.i do not drive on rough roads or roads full of potholes.

Decorative outer metal covers on nuts which secure the wheels to the rotor on special gold colored wheels and on similar wheels in silver white etc., come loose during normal driving and are projected at high speed like bullet.this could result in causing accidents and injuries including to pedestrians, breaking glass including windshield.

Read more

2022-07-30 5 min.

Decoding Your Peugeot VIN Number: A Comprehensive Guide

2022-07-30 5 min.

Decoding Your Renault’s VIN Number: A Comprehensive Guide

2023-02-19 5 min.

Do All Cars Have VIN Numbers? What You Need to Know

2023-02-21 6 min.

Decode Your BMW's VIN: Discover Hidden Details

2023-02-20 5 min.

Learn How to Use CarVertical to Check Your Car’s History Like a Pro

2023-02-19 5 min.

What Is CarVertical And Why Is It Worth It

2023-02-22 5 min.

Smart Choice: Advantages & Tips for Purchasing Second-Hand Cars

2023-02-21 7 min.

CarVertical vs AutoDNA: Which Car History Check Service Is Better?

2023-02-18 5 min.

Safely Buying a Used Toyota Land Cruiser: Importance of VIN Check

2023-02-20 7 min.

Unravel Your SEAT Car: Detailed Guide for Decoding Your VIN Number

2022-07-30 5 min.

Expert Tips: Things to Consider When Buying a Used Vehicle

2023-02-19 5 min.

Why a Car VIN Check Is Super Important Before Buying a Car

About

This is the most popular VIN decoder tool website in the world, where you will find information about what a VIN code is, where to find a VIN code, what a VIN code means, etc., among other things, the basic VIN check on our website is free. We advise you to use CarVertical services to get accurate vehicle information.

CarVertical

It is the most popular VIN reporting provider in the world. The quality of CarVertical services is already taken advantage of by millions of people around the world. If you are interested in a good quality VIN check tool, then CarVertical is what you are looking for.

Enter VIN number

We found the following complaints for PLYMOUTH VOYAGER (1992)

About

CarVertical

VIN check