We found the following complaints for PLYMOUTH PROWLER (2000)
Read complaints for PLYMOUTH PROWLER (2000)
While pulling the top downlatch broke. Vehicle was taken to the dealer, who has to order the parts for repairs.
Ball joint broke off .. Front right .
The contact owns a 2010 plymouth prowler. Thecontact stated that the hood props would not support the hood lid when opened. The vehicle was taken to an authorized dealer and repaired. The exact repairs were unknown. The manufacturer was notified of the problem. The approximate failure mileage was 1,952.
Hood shocks do not support hood weight. I have had the hood crash down several times, but no one was hurt. Part is of faulty design. Replacements do not workl, and crash hood if underhood sound insulation gets wet. Extereme danger of death by crashing hood. Many other owners of plymouth/chrysler prowlers have reported changing the hood shocks several times with no solution. Several other owners have reported being hit on the head while looking under the hood, having injured their wrists and fingers from hoods crashing down.you have received many reports already. When the hell are you going to do something about this? how many people have to get injured or die? why don't you do your job, like you are supposed to, and demand a dc recall. Please do not take this lightly, it is a serious problem, with serious consequences.
Hood struts won't support hood,have been replaced by chrysler once and car has2000 miles since replacement and no good again.warranty has expired and i see no use replacing again with what chrysler sells.car is 2000 plymouth prowler.i also think chrysler should stand behind this item.
Hood shocks do not support hood weight. I have had the hood crash down several times, i was hit in the head and had my fingers cut. Other owners of plymouth/chrysler prowlers have reported changing the hood shocks several times with no solution. Several other owners have reported being hit on the head while looking under the hood, having injured their wrists and fingers from hoods crashing down.
The hood supports will not hold the hood up while i am working on the engine.the car is a 2000 plymouth prowler.chrysler replaced the hood supports under warranty for the same problem.if you have you head under the hood, it slowly settles on your head.this a recurring problem.the date below was the last time i had the hood open.
Hood shocks do not support hood weight. I have had the hood crash down several times, and was hurt. Other owners of plymouth/chrysler prowlers have reported changing the hood shocks several times with no solution. Several other owners have reported being hit on the head while looking under the hood, having injured their wrists and fingers from hoods crashing down.
The contact owns a 2000 plymouth prowler. The contact stated that while driving approximately 5 mph, there was a sudden loss of power steering assist without warning. The vehicle was towed to a dealer where it was diagnosed that the front lower control arm ball joints needed to be replaced. The contact mentioned that the vehicle was recently serviced under nhtsa campaign number: 03v0034000 (suspension) however, the failure recurred ten years later. The manufacturer was not notified of the failure. The vehicle was not repaired. The approximate failure mileage was 50,000 and the current mileage was 142,000.
While driving, the ball joint separated from the lower control arm and the car had to be quickly stopped. The car was not drivable and had to be assisted to a safe area.the car was recalled in 2003 to address the same problem (2000 plymouth prowler suspension recall 03v034000). However, i was told by the person repairing the car that the replacement part has the same problem of coming apart during driving and it is a major safety hazard. Chrysler will not honor the old recall or issue a new one because the car is a plymouth and they do not service or back plymouth products as a result of their bankruptcy.
The lower ball joints fail constantly, i have had to replace my lower ball joints 3 times in 19,000 miles. Chrysler has recalled them and replaced them free for the first failure, but will not replace additional failures. A lower ball joint failure will cause loss of steering and will cause an accident. Every time they fail, they also destroy the rim. Chrysler knows very well that this is a problem, but will not cover the cost of replacements after they have repaired this item once.every time there is a failure, chrysler wants to sell you a complete lower control arm that cost $ 1200 dollars each. The lower ball joint usually fails when pulling away from a curb with the wheels turned, and there is a loss of steering at this point. Chrysler knows this is a problem, and should warranty this item for life as most of the prowlers are very low mileage with less than 30,000 miles. Chrysler does have a recall kit that is available to dealers only that includes the ball joints only , but will not sell them to the public and we can only buy them with the complete lower control arm. This is a safety item that can & will cause an accident. The recall kit part number is ( cbbtc030)
The contact owns a 2000 plymouth prowler.in 2001, the contact first experienced failure with the front passenger side lower ball joint.the dealer replaced the lower ball joint at the cost of $1,800.in 2003, the contact received a recall notice for nhtsa campaign id number 03v034000 (suspension: front: control arm: lower arm).the vehicle was taken to the dealer a total of five times for the failure.the most recent failure occurred on february 8, 2008.while driving approximately 5 mph, the front passenger side lower ball joint failed.the vehicle will be repaired. The failure mileage was 30,000 and current mileage was 120,000.
The vehicle's lower ball joints were recalled 18 months ago but the dealer still hasn't received the parts to repair the problem.recall campaign 03v034000.*sc
The front passenger lower control arm broke.
Consumer has been waiting since march of 2003 for parts.suspension was broken. Dealerstated partswere not available.
The dealership doesn't have the tools or parts to perform the recall on the lower ball joints 03 v 034 000.*mr*scc
Window regulator or the cable envelope that has cracked open and not allowing the spinning cable to push the window and the cable is literally coming out of the envelope, or envelope/tubing is simply pulling apart while the interior cable is in motion. .
Read more
