We found the following complaints for GMC YUKON (1994)
Read complaints for GMC YUKON (1994)
618-661-1027(h):abs: while making panic stop, brakes went completely to floor; brakes light came on; engine died; rearended another vehicle.tt
I have told you about the seat. I have told you about the suspension. At 70 miles per hour the speedometer drops about 25 miles per hour then the turn siginal is turned on. The cruise control engaged even that it was shut off. I just watched date line and seenhow you handle these complaints. So i don't expect to hear from you . Just file this like everthing else.
Anti lock brake light switch failed 3 times prior to recall notice g9806505, resulting in 2 accidents, rear ending vehicle and hitting a deer due to failure.nlm
Truck popped out of gear and rolled backwards and crashed in to a barn.
Faulty transfer case output shaft snap-ring.#12470554.this ring has failed three times in three years.gm can't tell me why the ring fails.cost about $250 to replace this $6.00 item. *la
Rear middle seat belt has failed, seat belt buckle disengages while pulling on belt.
Seat belts fail to retract.
Shoulder/lap belt top retractor fails to engage. Please describe details.
After fastening seatbelts (both driver and passenger) correctly, and you lean forward or move a small amount, the portion of the seatbelt that crosses your chest does not retract correctly-instead, this portion isloose and hangs away from your body.this situation has occurred a long time ago with no relief.a gmc dealer explained the ratchets are not working properly and have not been. As you can see, the vehicle does not have many miles on it and has not,nor does the vehicle experience any abuse.as stated earlier, this situation has lasted for quite awhile.thank you.
I have told you about the seat. I have told you about the suspension. At 70 miles per hour the speedometer drops about 25 miles per hour then the turn siginal is turned on. The cruise control engaged even that it was shut off. I just watched date line and seenhow you handle these complaints. So i don't expect to hear from you . Just file this like everthing else.
When driving,if stopped at a stop sign, as soon asbegins to accelerate the seat bolts will break. This has happened five times. The dealer has replaced the adjusters four times as well as other parts of the seat. (the driver side seat only). The dealer will be repairing for sixth time as soon as the parts are available.
Creeking noise comeing from seat base, i removed cover and there were numerous cracks in metal seat base by the rear pivots.
Driver's bucket seat broke in the area where it connects to frame next to floor while occupant was exiting vehicle, cause of breakage unkown.
Metal bracket that connects seat to the frame broke. Dealer has been notified.
Seat tracks and anchors have broken, cause unknown. Please describe.
Passenger side is defective bolt that hold back of seat up is only .323 thousants thick
Seat back collasped due to bolt failure.
My wife and i have owned this vehicle since 1996.we bought it used with 18,000 miles on it.i have always had trouble hearing noises and trouble with a soft brake pedal on this vehicle.when the car had about 40,000 miles on it, i had an incident where i applied the brakes going about 55 miles per hour to slow down to get on the expressway and both rear wheel cylinders blew out on me almost causing a severe accident.since the vehicle turned over past 60,000 miles, i have had at least three incidents where accidents almost occurred due to the brake pedal going all the way to the floor on me and i was unable to stop.twice this has happened after getting brand new brakes done all the way around, once at the dealer and once at a midas muffler shop.this is a very dangerous malfunction in the abs system.i will contact the dealer tomorrow, since it just happened again.dt
While driving on the road consumer tried to stop vehicle by applying brakes,butvehicle would not stop.
While driving at 35 -45 mph the consumer rear ended a vehicle while trying to stop. There was plenty of stopping distance and the roads were dry.
When applying the abs brakes in an emergency stopping,the pedal has aresistance factormaking itdifficult for thevehicle to stop, resultingin a crash.
The consumer was driving 25 mph, when the front brakes locked, causing him to drive into a creek.the vehicle was retrieved and towed.the abshad started to make a noise prior to the brakes locking.
Abs: when anti lock braking system activates, pedal goes to floor; vehicle rolled through intersection.tt
This was the second time that my anti-lock brakes failed in an emergency situation. As for the seat anchor, i nearly fell into the back seat after paying a toll and continuing on my way home... What a heart stopping situation!
When vehicle go over bumps the abs system activates prematurely,causing the system to become mushy.the dealer has been notified.
While driving atapproximately 20-25mph and coming to a stop, brake pedal went to floor and vehicle failed to stop.would have to pump brakes to get them to work. The master cylinder & front brakesalsowent out. Took to dealer for repair of brakes.
Abs brakes; when applied on several occasions, pedal goes to floor and then respond. Computer chip doesn't acknowledge failure. Please decribe details.tt
On snow or ice experienced intermittent lockup of all 4 wheels in last 10-15 feet of stopping distance, on abs equipped vehicle, no prior warning.tt
When driving at approximately2-55 mph brakes do not work properly, will push brakes to floor, hears grinding noise, changed brakes pads/rotors.
Abs system failure, loss of braking ability at 15-20 mph.tt
Consumer was traveling 57mph when brakes were appplied. Vehicle couldn't stop & continued to roll.abs started to making a grinding noise & the brake pedal got rock hard. Cosumer rearended another vehicle,causing small damage.dealer hasn't been contacted, but will be.
618-661-1027(h):abs: while making panic stop, brakes went completely to floor; brakes light came on; engine died; rearended another vehicle.tt
Owner has abs brakes, he states that the brakes malfunctioned at low speeds,onweralso notes that his vehicle will not stop properly in emergeny situations.
Driving down a road getting ready to get on the on ramp onwet surface a vehicle in front was at a complete stop. Looked back at traffic to proceed on and the vehicle in front moved. As a result, rear endedthe other vehicledue tobrake failure.
When braking hard, especially in a downhill motion on wet or snowy roads the brakes lock up. Removing one's foot from the pedal does not release the braking action. Only when the tires stop skidding does the braking action release, allowing for one to "try again" by applying the brakes more gently. By then the vehicle is nearly stopped anyway. I have nearly skidded into intersections or cars in front of me on at least five occasions.
Failure on the anti -lock brakes,when driving the vehicle pedal goes to the floor,causing the consumer to have anaccident.
When driving at approximately2-55 mph brakes do not work properly, will push brakes to floor, hears grinding noise, changed brakes pads/rotors.
While driving atapproximately 20-25mph and coming to a stop, brake pedal went to floor and vehicle failed to stop.would have to pump brakes to get them to work. The master cylinder & front brakesalsowent out. Took to dealer for repair of brakes.
When braking hard, especially in a downhill motion on wet or snowy roads the brakes lock up. Removing one's foot from the pedal does not release the braking action. Only when the tires stop skidding does the braking action release, allowing for one to "try again" by applying the brakes more gently. By then the vehicle is nearly stopped anyway. I have nearly skidded into intersections or cars in front of me on at least five occasions.
Entire front brake system fails due to faulty calipers.
When braking hard, especially in a downhill motion on wet or snowy roads the brakes lock up. Removing one's foot from the pedal does not release the braking action. Only when the tires stop skidding does the braking action release, allowing for one to "try again" by applying the brakes more gently. By then the vehicle is nearly stopped anyway. I have nearly skidded into intersections or cars in front of me on at least five occasions.
When braking hard, especially in a downhill motion on wet or snowy roads the brakes lock up. Removing one's foot from the pedal does not release the braking action. Only when the tires stop skidding does the braking action release, allowing for one to "try again" by applying the brakes more gently. By then the vehicle is nearly stopped anyway. I have nearly skidded into intersections or cars in front of me on at least five occasions.
While driving atapproximately 20-25mph and coming to a stop, brake pedal went to floor and vehicle failed to stop.would have to pump brakes to get them to work. The master cylinder & front brakesalsowent out. Took to dealer for repair of brakes.
When brake pedal is applied in a panic situation the pedal will resist pressure tha tdrive ris applyin gto it. This delays actual braking action by a second or more;four such incidents occurred, one resultin gin a rearend collision.
When braking hard, especially in a downhill motion on wet or snowy roads the brakes lock up. Removing one's foot from the pedal does not release the braking action. Only when the tires stop skidding does the braking action release, allowing for one to "try again" by applying the brakes more gently. By then the vehicle is nearly stopped anyway. I have nearly skidded into intersections or cars in front of me on at least five occasions.
Seat tracks and anchors have broken, cause unknown. Please describe.
The contact owns a 1994 gmc yukon. The contact stated that while parking, there was a loud bang from under the frame. The contact discovered that the vehicle was rusted near the axle and lower control arms. The failure was reported to the manufacturer. The vehicle was not repaired. The failure and the current mileages were 140,000.
Front tire turned at an angle, making it impossible to control vehicle. The brace from the a-frame broke. Dealer saidthat a frame needs to be welded back together.
Truck loses control while turning a corner or on wet pavement, dealer has suggested to soften suspension.
Front tire turned at an angle, making it impossible to control vehicle. The brace from the a-frame broke. Dealer saidthat a frame needs to be welded back together.
I have told you about the seat. I have told you about the suspension. At 70 miles per hour the speedometer drops about 25 miles per hour then the turn siginal is turned on. The cruise control engaged even that it was shut off. I just watched date line and seenhow you handle these complaints. So i don't expect to hear from you . Just file this like everthing else.
I have told you about the seat. I have told you about the suspension. At 70 miles per hour the speedometer drops about 25 miles per hour then the turn siginal is turned on. The cruise control engaged even that it was shut off. I just watched date line and seenhow you handle these complaints. So i don't expect to hear from you . Just file this like everthing else.
The contact owns a 1994 gmc yukon.the contact stated that the windshield wipers worked intermittently.the dealer stated that the vin was not included in nhtsa campaign id number 03v159000 (visibility:windshield wiper/washer), although the failures were identical.the vehicle will be repaired at the contact's expense.the failure mileage was 155,000 and current mileage was 160,000.
Windshieldwipers workedintermittently. Dealer /manufacturer notified, and informed consumerthatthis ehicle was not covered under nhtsa recall 98v-150.001. Due to vin. *adj
Windshield wipers work intemittently. When it rains windshield wipers stop without warning.contacted dealer, and no reply tosituation.
Windshield wipers are working randomly. Dealer was contacted and denied the problem.problem still exist.
Intermittently while drivingwindshield wipers come on without application. The problem was reported to the dealership. A computer chip was replaced at owner's expense. When contacting manufacturer, owner was told that vehicle not included in recalls # 98v150001/98v150000 gm/ windshield wiper wiring due to vin#.
Windshield wiper motor failed causing poor visibility.
Recall 98v150000. Windshield wiper motor will stop when wipers are being used. Dealer contacted, and vehicle does not comply to recall.problem still exists.
The contact owns a 1994 gmc yukon.while driving at an unknown speed in the rain, the windshield wiper motor failed.when the contact set the wipers on high, they worked intermittently.report number 71-744459098 was filed with the manufacturer and they stated that the vin was excluded from nhtsa campaign id number 03v159000 (visibility:windshield wiper/washer).he will take the vehicle to the dealer to be diagnosed.the failure mileage was 132,000 and current mileage was 133,000.
Windshield wipers completly stopped working in a winter storm 12/09/03.i found out about a recall on the wiper circuit board and took it to the dealership and told them what had happened.they did nothing but look at the vin and told me that my 1994 yukon needed a circuit but did not fit into the recall.they were going to charge me $85.00 for something that many others get fixed for free.they knew what was wrong with the wipers without any exam at all.that tells me that there must also be a problem with all on the circuit boards in all of the trucks.i called gmc they told me it had to do with the plants were the boards were made.i would like to know how many plants there were. It would seem to me that if other people are haveing problems with the same part on the same trucks but their parts were made in a different plant that there is not a problem with the plant but a problem with the design of the part that will cause all of them to fail.i am going to have the one from my truck looked at by someone that designs and manufactures boards every day to see if the problem is the same as the one stated in the recall.someone needs to have this recall expanded to cover all of the defective (poorly designed) parts.
Windshield wipers will turn off intermittently, causing poor visibility. Vehicle isnot included under recall due to vinalthough it has same defect.
While driving in rainy weather front windshield wipers failed. Recall 03v159000 was issued.but this vehicle was not included in the recall due to vin. *mr
Windshield wipers quit working in the middle of operation. At times windshield wipers would come back on, and at times they would not. Sometimeswindshield wipers would not come on at all.when dealer was contacted about the problem, he indicated that vehicle could not berepaired free of charge. Vehicle not included in recall 98v150001 gm/windshield wipers due to vin.please provide any furhter information.
This same model truck was recalled in 1998 for model made on or after august 1994 on. Nhtsa has two campaign numbers for this same year. #98v150000 & #98v150001. The # of vehicles affected were 1,566,510. Year of recall was in 1998. These windshield wipers will either not come on during rain or will work and quit(this is the case most often).this is a safety issue that i would appreciate nhtsa looking into, and notifying of any changes in the recall. Thank you.
Windshield wipers operate intermittently.consumer contacted the dealer, whostated that this vehicle was not apart of the recall, but the plug to the wiper motordefective.
Nhtsa# 98-v-150-0001: vehicle description:light duty pickup trucks and sport utility vehicles, 2 and 4-wheel drive.solder joints near the wiring harness connector can crack causing the windshield wipers to work intermittently. Consumer has the same problem. However this vehicle was not recalled due to the vin.
Vehicle experienced the same defect with its windshield wipers as stated in recall 03 v 159 000.the consumers vehicle was not included in the recall due to vin.the windshield wiper worked almost 70% of the time. Sometimes the wiper wouldn't shut off by using the switch but when the would finally go off the stopped in the middle of the windshield which made it difficult to see. *nlm
Windshield wiper circuit board failed, recall (98v-150) does not apply to vehicle, denied recall repair. Mjs
Intermittentlywindshield wipers become inoperable, obstructingview ofdriver. A recall has been issued onvehicle's make and model; however, this vehiclewas not included due tovin. Dealer has been notfied.
I own a 1994 gmc yukon and the windshield wipers quit working without warning. Sometimes they will start working on their own, sometimes you have to tug on them to get them to start up again. The recall says 1994 to 1997 but i have not received a letter. Gm says my vin is not included.this is a joke, there is definately a defect and this is very dangerous as i drive 68 miles a day.
Read more
