We found the following complaints for FORD CROWN VICTORIA (1995)
Read complaints for FORD CROWN VICTORIA (1995)
I am trying to find out if this vehicle was used as a taxi/police vehicle and if any recall services were performed on it. Hyannis ford inc. Stated there were no recalls on this vehicle, but i saw many listed on this site, i have questions in regards to the suspension/airbags/torque converter,etc. Could you please tell me how i can find out if this vehicle has recalls on it and if i can get the work done. I had immediate problems with the vehicle when i bought it, and i don't think the dealer will give me straight answers. Thanks for any help or informationyou can give me.
Air bag deployment was violent during accident, causing injuries to both driver and passenger.*skd
Steering wheel is loose, feels like it could come. Air bag light is on, cruise controlnot working correctly. All these things are safety related and should be fixed. I think steering wheel should be repaired free of charge, since it's a major problem.
Air bag warning light remains illuminated, indicating a malfunction within the system.dealer replaced the clock spring within the steering column which has not corrected the problem.
Airbag did not inflate fully causing consumers chest to hit the steering wheel.the violent deployment of the airbag caused injury to the victims arm and also caused the seatbelt to cut her stomach.
Passenger air bag emitted burst of intesnse heat into glove box during deployment, melting plastic contents - concern arises because vehicle was a police cruiser with ammunition (none discharged during accident) stored in the glove box.
A sudden stop caused the a head-on collisionand the air bags deployed and consumer's wife lost her hearing.
Frontal collision, impact 12:00, speed 50 mph, passenger's air bag failed to deploy.
Frontal collision, impact 12:00, speed 50 mph, driver's air bag did not deploy .tt
While driving 35 mph on a straight road vehicle swerved to avoid hitting an object. The front tires collided with normal size cement curb, causing the air bag to deploy. Driver lost control, resulting in a clash.
Drivers airbag did not deploy upon impact; airbags deployed after officer existed vehicle; driver's shoulder/seat belt did not hold; hit a tractor trailer
Passengers airbag did not deploy upon impact; airbags deployed after officer existed vehicle; driver's shoulder/seat belt did not hold; hit a tractor trailer
The contact owns a 1995 ford crown victoria.while the vehicle was parked in the carport, the middle of the steering wheel melted from the air bag module inside of the steering wheel.as a result, the air bag is hanging from the steering wheel and there is a strong smell present from the air bag melting the steering wheel.the contact received a recall notice for the cruise control, however, the dealer and manufacturer stated that there were no recalls for this defect.the vehicle has not been repaired.the nhtsa campaign id number and powertrain were unknown.the failure and current mileages were 147,000.
The contact owns a 1995 ford crown victoria. The contact stated that while driving 65 mph with the cruise control activated, the cruise control failed. In addition, the horn failed. The vehicle was not repaired or diagnosed. The manufacturer was notified of the incident. The vehicle was previously repaired under nhtsa campaign number: 08v051000 (vehicle speed control). The vehicle was not further repaired. The approximate failure mileage was 215,000.
Dt: contact states on 7-26-05 1995 crown victoria caught on fire.smoke and fire came from the hazard switch and the directional signal switches. On 1-16-04 signals would not work so she had a multi-functional switch put on.the covering on the steering column were destroyed and all of the wiring inside had to be replaced. The fire department. Was not called.
The alternator gauge,alternator and the window couldn't roll up, there is a popping noise in the front end .ttconsumer states the front end collapsed because of the dealerships reuse of a neoprene nut, also there is a popping noise in front end, fuel tank was replaced, alternator replaced, fuel guage on instrument panel replaced,rear passenger window would not roll all the way up, gas lid fills with water, replaced both arm bushings and correct toe end, cassette player does not work properly, and a malfunctioing head light switch.
Horn buttons difficult to access while driving without taking eyes off road.
Headlight lenses constantly turn yellow and cloudy, power window regulator cables constantly snap, excessive play in steering wheel, horn buttons too small and inconvienient and pop out at times, egr chamber always clogs every 40k miles and causes stalling condition.
Horn is not loud enough and the horn buton is to small and hard to find when needed. In 1996 i noticed the button was changed by ford,so they knew it was a problem too. I think it should be replaced with a 1996 stering wheel or horn buttom assembly and thehorn needs to be much louder.
Consumer can't locate the horn button to blow the horn.took vehicle to the dealer and they said it was a faulty design made by the manufacturer.
Design/location of the horn button causes difficulty accessing horn in emergency situations.
Size and location of horn button prevents easy access during emergency situations.*skd
Horn blew intermittently without anyone being in/around vehicle.*skd
Ford crown victoria has hesitated on numerous ocassions.
Replaced wiring assembly.
When it is raining outside (moist air /dew) when running the wipers for a period of time when you go to turn off the wipers they may stop in the center of the windsheild or all the way towards the outsideof the (a pillar) you then have to either attempt to turn the switch on and off fromhigh to low to off or low to off to attempt to retract them into there normal position
The front suspension ball joints were replaced at my cost. They had started squeakingand were worn badly. My mechanic suggests that the entire front suspension be rebuilt for safety because ford does not have grease joints on any these parts. When the horn button was pushed for longer than a few seconds, it used to blow the fuse. The last time it did this, it also disabled the cruise control. I was told by my mechanic the only fix was to replace the steering column where these wires were shorting together internally.
Recall # 95s24. Dealer does not have parts.tt
The vehicle started to burn from under the dashboard. It burned itself out. Please describe.
Ford crown victoria rusted oil pan and brake failure. Customer states the brakes failed while backing out of a parking space. The oil pan rusted and was removed and replaced on a maintenance service. Updated 12/12/07 when the brakes failed, fluid was dripping from under the left/center body. The dealer informed the consumer the brakeline was enclosed in the frame channel and the body would have to be lifted in order to make the repair. Updated 12/12/07
Driving vehicle about 20 mph vehicle started sputtering before stalling out; had it towed to mechanic & informed a spring had broken & the rod went through engine, causing the malfunction.(police interceptor).
While driving at 60 mph vehicle stalls for no reason. Dealers have replaced emission control device which did not correct problem.
While driving the vehicle would stall and lose all power. When the vehicle loses all power the steering goes out.
Intermittent stalling.
Engine failed/stalled.
Car was hit head-on and fire broke out in the engine compartment.
Engine failed to start after several repair attempts.
While driving down the interstate, i noticed a noise and strange feeling in the steering wheel.it felt like the car's engine had shut off.i pulled over, but the car was still running.however, the alternator light was on and there was no response from the power steering.upon examination, the serpentine belt had come off due to an apparent seizure of the tensioner pulley.it had melted and fallen off.the heat was great enough to leave drops of molten aluminum on the shroud underneath and the pulley itself was melted into it as well.my whole family was in the car at the time and we beleive that under other driving conditions or circumstances this could have caused a deadly crash.thank you for your time,lemuel justice.
While driving at 60 mph vehicle stalls for no reason. Dealers have replaced emission control device which did not correct problem.
Catalytic converter odor.
My engine checklight keeps going on.we have changed the pfe sensor, installed new egr sensor, and installed a new egr selenoid, along with changing the second sensor.still the "check engine" light goes on.i knowwhenthe light goes on because i can feel in wheni excelerate. Now i will be bring it to the mechanic for the 5 time next week.this egr has something to do with the air pollution, and it also effects my gas mileage.thank you for your time.
Headlight lenses constantly turn yellow and cloudy, power window regulator cables constantly snap, excessive play in steering wheel, horn buttons too small and inconvienient and pop out at times, egr chamber always clogs every 40k miles and causes stalling condition.
The alternator gauge,alternator and the window couldn't roll up, there is a popping noise in the front end .ttconsumer states the front end collapsed because of the dealerships reuse of a neoprene nut, also there is a popping noise in front end, fuel tank was replaced, alternator replaced, fuel guage on instrument panel replaced,rear passenger window would not roll all the way up, gas lid fills with water, replaced both arm bushings and correct toe end, cassette player does not work properly, and a malfunctioing head light switch.
The vehicle in front of me, due to a faulty strap/hook on the motorcycle carrier, lost its mountain bike.i could not stop in time, destroyed the bike and did slight damage to my bumper.please tell me if there are any controls or rules for the safe manufacture of bicycle carriers??.....thank you!
Headlamp lenses have become white and smokey looking causing lighting to be poor on low or high beam resulting in poor visibility.
Lights dim when vehicle is driven slower than 40 mph.
Headlight lenses constantly turn yellow and cloudy, power window regulator cables constantly snap, excessive play in steering wheel, horn buttons too small and inconvienient and pop out at times, egr chamber always clogs every 40k miles and causes stalling condition.
Recall for power windows and head lamps. Recall #95s24.tt
The headlight plastic cover turned yellow making it hard for the consumer to see.the lights had to be turned on high.*scc
Headlight switch overheats and causes a temporary failure of entire vehicle lighting system. This is a documented problem which has happened to others and needs to be recalled.
Headlight switch fails to work properly when turned on. Would sometimes go on/off on its own. The electrical wires to the switchshorted out.
The alternator gauge,alternator and the window couldn't roll up, there is a popping noise in the front end .ttconsumer states the front end collapsed because of the dealerships reuse of a neoprene nut, also there is a popping noise in front end, fuel tank was replaced, alternator replaced, fuel guage on instrument panel replaced,rear passenger window would not roll all the way up, gas lid fills with water, replaced both arm bushings and correct toe end, cassette player does not work properly, and a malfunctioing head light switch.
Intermittentlymulti service switch malfunctioned. Dealer has replacedmulti service switch, problem has not reoccurred.
Subject regarding fuel system upgrade for ford.*dt
While driving slowly into garage, there was a loud explosion, followed by a fire ball from front to rear; vehicle and garage totaled; cause not yet determined.
Dt:the contact states there is a nhtsa recall campaign id02i003000 concerning the fuel neck of the gas tank.this vehicle hasthe sameproblemsas indicated in the recall.the manufacturer said this vehicle's was not included in the recall because it was no longer used by law enforcement.the vehicle has not been repaired at this time.updated 1/25/2006 -
Fuel pump failed, vehicle stalls unexpectedly which could cause an accident.tt
Vehicle collided with steel utility pole, causing breakage of fuel line/fire. *sd
Gas tank seal leaked prior to service recall
The alternator gauge,alternator and the window couldn't roll up, there is a popping noise in the front end .ttconsumer states the front end collapsed because of the dealerships reuse of a neoprene nut, also there is a popping noise in front end, fuel tank was replaced, alternator replaced, fuel guage on instrument panel replaced,rear passenger window would not roll all the way up, gas lid fills with water, replaced both arm bushings and correct toe end, cassette player does not work properly, and a malfunctioing head light switch.
Gas is spilling out of gas tank between the filler neck and the fuel tank . Consumer feels this may cause a fire if something ignites on the ground.
Consumer states contacted dlr regarding ford fuel tank modification.consumer advised that vehicle was previously and police fleet car.dlr advised still will not make modification because car is not currently being used as a police car.nlm
Ford motor company was contacted by toll-free number.(no solution given). No safety defect listed.
The consumer was concerned about rear-end collision fires regarding the crown victoria's. *ph
I own a vehicle driven by law enforcement. To date nothing has been done for the single owner. Is this saying we are not going to have a similar condition occur?? attourny general sent a letter to the ford people. As yet no decision has been made. Is the public to assume that another person has to loselife in order for this problem to be resolved.
The alternator gauge,alternator and the window couldn't roll up, there is a popping noise in the front end .ttconsumer states the front end collapsed because of the dealerships reuse of a neoprene nut, also there is a popping noise in front end, fuel tank was replaced, alternator replaced, fuel guage on instrument panel replaced,rear passenger window would not roll all the way up, gas lid fills with water, replaced both arm bushings and correct toe end, cassette player does not work properly, and a malfunctioing head light switch.
The fuel pipe leaked, which caused a strong smell of fuel . Dealer notified.
The alternator gauge,alternator and the window couldn't roll up, there is a popping noise in the front end .ttconsumer states the front end collapsed because of the dealerships reuse of a neoprene nut, also there is a popping noise in front end, fuel tank was replaced, alternator replaced, fuel guage on instrument panel replaced,rear passenger window would not roll all the way up, gas lid fills with water, replaced both arm bushings and correct toe end, cassette player does not work properly, and a malfunctioing head light switch.
Fuel gauge and sender assembly failed.
Four aluminum rivets that hold my hood to the latch striker plate broke causing the hood to fly up and break windshield and blinding driver, recall component on heavier suspension models, vehicle denied due to suspension design.
The hood came up and blinded me on the freeway at 60mph. I beleive i am lucky to be alive and not injured.nhtsa campaign id number: 97v024000, describes what happened to my car.i believe the same hood latch striker defect exists on 1995 crown victoria's without the police option,but it just takes longer to show up.this defect showed up on my car with 96625 miles of mostly freeway driving.i suspect in time many other standard 1995 crown victoria's will be having this problem.the four aluminium rivets that hold the hood striker plate to the hood fatigued with the stress of freeway driving, and came out when i was traveling 60mph on the freeway, releasing the hood which came up and smashed my windshield and blinded me.i am luck to be alive and not in injured.
While coming to a stop the emergency brake and the hydraulic brake went out and the owner could not stop the car.
Front disc brake calipers failed. Also replaced emergency brake.
Rear emergency parking brake cable clip has worn through the cable .this could result in emergency parkingbrake failure.cable is also rubbing against shock absorber causing a wear in a second location.manufacturer has not been notified.
Transmission failure. Aw
When drivingat speeds between 30 and 40mph the vehicle loses power as if t transmission is slipping. Dealer has not seen vehicle.
Hairline crack in the transmission case resulted in hard shifting of the transmission.
Transmission slips for a second or two when accelerating from a standing start intermittently.car was serviced for this symptom once under warranty and again in sep. 2001.began experiencing symptom again, not sure of exact date.latest occurred on or about 3/13/2003.
Tramsmission hesitates and engages suddenly.
Car vibrates and gear shifts at low speed. I brought it to dealer and had transmission serviced.torque coverter will need to ber replaced, if it continues
Vehicle engine had to be raced to get it into first gear.
Pitman arm separated, after inspection found the separation of the arm. Transmission was also replaced, with low mileage.
Transmission continues to hesitate, jerk and lurch forward after repair of the faulty torque converter, unable to rectify transmission failure.
Transmission shifting problem.
Car vibrates and gear shifts at low speed. I brought it to dealer and had transmission serviced.torque coverter will need to ber replaced, if it continues
Transmission continues to hesitate, jerk and lurch forward after repair of the faulty torque converter, unable to rectify transmission failure.
I am trying to find out if this vehicle was used as a taxi/police vehicle and if any recall services were performed on it. Hyannis ford inc. Stated there were no recalls on this vehicle, but i saw many listed on this site, i have questions in regards to the suspension/airbags/torque converter,etc. Could you please tell me how i can find out if this vehicle has recalls on it and if i can get the work done. I had immediate problems with the vehicle when i bought it, and i don't think the dealer will give me straight answers. Thanks for any help or informationyou can give me.
Owner states while driving vehicle it stalls,causing vibration,theremay be a faulty torque converter,dealers cannot find problem.
Torque converter failed twice.
Consumer states that drivers seat belt does not lock. Delaer notified.
Driver side seat belt is inoperative.belt will either,not fasten or will release while fastened.cause of the failure is undetermined. Also hile driving and brake pedal depressed, the pedal will "surge against driver's feet". When thisoccursvehicle fails to stop, causing extended stopping distance.
Seat belt does not retract.qcaw
Front seat shoulder straps failed.please describe.tt
Passengers airbag did not deploy upon impact; airbags deployed after officer existed vehicle; driver's shoulder/seat belt did not hold; hit a tractor trailer
I'm aware of seat belt latch failures(driver's side only) on several vehicles.
Vehicle was at complete stop hit at 6:00 position, driver side collapsed into recline position causing injuries.tt
Anti-lock brake system constantly cycles and ceates a hazardous condition by reducing braking power on smooth dry roads.
Constant abs failure caused by sensor and steel ring rust in brake system. Problem causes activation of abs system without regard to speed, conditions or any braking effectiveness. Abs pump may run at any time the brakes are applied causing increased stopping distance on smooth dry roads.
Rotors warped causing vehicle to vibrate when braking.
Steel brake lines to both rear brake cylinders developed leaks causing almosttotal loss of breaking. Both leaks occurred along the frame member at themidpoint of the chassis.
Driver side seat belt is inoperative.belt will either,not fasten or will release while fastened.cause of the failure is undetermined. Also hile driving and brake pedal depressed, the pedal will "surge against driver's feet". When thisoccursvehicle fails to stop, causing extended stopping distance.
The contact owns a 1995 ford crown victoria. The contact stated that while driving 25 mph and attempting to decelerate, the brakes failed. The vehicle was put into neutral in order to stop the vehicle. The failure occurred on an intermittent basis. The vehicle was inspected by a dealer who informed the contact that the brake line was corroded. The brake line was repaired. The failure mileage was approximately 118,000.
The contact owns a 1995 ford crown victoria.while pulling out of the driveway at an unknown speed, the brake line exploded.the manufacturer stated that his vin was not included in nhtsa campaign id number 98i001000 (service brakes, hydraulic:foundation components:hoses, lines/piping, and fittings).the vehicle has not been repaired.the failure and current mileages were 125,000.
First related symptom:few years ago brake lines rusted under the hood.original remedy: i have painted them to protect them from further rust.current issue:12/26/2008 brake light switched on during drive to work.12/26/2008 brake pedal got soft on the way back to home.12/27/2008 i have checked the brake fluid.it was low.i have bought and add more fluid (car was not moved this day).while fluid was added i started the engine and in park gear i have pumped the brake pedal.it remained soft.fluid got low again...there was a fluid on the pavement between rear axle and the fuel tank in the middle of the car.speed of break deterioration and speed at which car is loosing fluid might lead to an accident.this is definitely a safety issue.vehicle: crown victoria 1995, with abs and traction assist.break lines have corroded several years ago, now first has developed large leak.i will have to repair the car in the next few days, this is first time i will repair the lines.the vehicle has 130k miles.i have never seen other vehicle with such brake line corrosion.
Abs light sensor keeps coming on. Vehicle has been in/out of dealer's shop, and the condition would return within a day or as much as four days.dealer keeps charging consumer every time he brings the vehicle back.
The abs is engaging unexpectedly and the brakes don't work. This happens on normal road conditions.one minor accident already happened.
Anti-lock brake system failed.
Abs brake failure, overheating, replacement of rotors andpads, and causing a vibration in the front end and makes a grinding noise, a loss of effectiveness.
Anti-lock brakes come on when ever they feel like it.been serviced many times, still having same problem.
(four wheel disc brakes). During inclement weather total loss of abs capabilities.resulting in vehicle crash. The vehicle does not stop properly when the weather is damp or wet, and the responce time from initial brake depression to actual braking is too long. *nlm
Officer turning corner in vehicle, brakes started pulsating (abs), vehicle hit a home.
Consumer has had this abs problem for over 3 years. When the brakes are applied they make a horrifying grinding & rubbing sound. Dealer says the only remedy is to replace the brake line.
Anti lock brakes grind in wet weather.
Other: air bag readiness light comes on/stays on intermittently. *dsh
While coming to a stop the emergency brake and the hydraulic brake went out and the owner could not stop the car.
Front brake rotors are worn out, and the pads are not on the spring plate.originally incorrectly installed. Ford was told about the problem. But is not interested in hearing the problem..et.
Front disc brake calipers failed. Also replaced emergency brake.
(police car),failure on the front brake caliper bracket bolts.
Abs brake failure, overheating, replacement of rotors andpads, and causing a vibration in the front end and makes a grinding noise, a loss of effectiveness.
Linings fall off of shoes causing loss of emergency braking.
The brakes on this vehicle wear excessively.
Abs brake failure, overheating, replacement of rotors andpads, and causing a vibration in the front end and makes a grinding noise, a loss of effectiveness.
Brake rotors warped/noisey. *sd
Consumer has had this abs problem for over 3 years. When the brakes are applied they make a horrifying grinding & rubbing sound. Dealer says the only remedy is to replace the brake line.
The brake fluid in my 1995 ford crown victoria had to be topped off last week. The red brake light came on indicating the fluid was low. After filling the fluid and driving the car, the pedal felt a little on the soft side, but no light. On my way to work today, i was 2 miles from home and went to apply the brakes. I had no brakes whatsoever. The pedal did have some feel to it, but there was absolutely no brakes. Luckily, i veered off the road avoiding a collision with a car, and had to downshift the car to get it to slow down. After getting the car to 5 or so mph, i shifted into reverse to stop the car, then park. The red brake light never came on and i had no warning of the failed brakes. After inspection, i found both brake lines to be rusted out on the drivers side frame rail. All brake lines on the car were inspected and are extremely rusty. The car is inoperable and has not been repaired as of yet.
Dt*:the contact stated while driving the vehicle at 8 mph, the brake light illuminated. The contact depressed the brake pedal. There were no brakes; the vehicle was driven home without any brakes. Upon inspection of the master cylinder the brake fluid was 3/4 empty.the vehicle was inspected further and the problem was the tubing that holds the brake fluid was corroded and cracked, causing the fluid to leak out.the manufacturer was alerted.updated 2/13/2006 -
Consumer applied brakes at 35 mph and the pedal went to the floor, no braking action. Mechanic (friesmill auto repair) determined that the rear brake line had ruptured.rear brake lines were repaired.*sccreferenced in rq03-004
While the vehicle was in the repair shop to have its tires rotated the mechanic informed and showed the consumer that all the metal brake lines were corroded, and needed to be replaced.
1995 crown victoria right rear brake line failed and resulted influid leakage because of corrosion on line and line fitting.(12/01/05)*sc
Brake line rusted through causing rear brakes to fail.the brake line piping should either be made of stainless steel, or coated with a rust preventative, or shielded in some way so water/snow/road salt can not get between it and the frame of the car, causing it to rust through.this isn't rocket science !!!!!!!!
Ford crown victoria rusted oil pan and brake failure. Customer states the brakes failed while backing out of a parking space. The oil pan rusted and was removed and replaced on a maintenance service. Updated 12/12/07 when the brakes failed, fluid was dripping from under the left/center body. The dealer informed the consumer the brakeline was enclosed in the frame channel and the body would have to be lifted in order to make the repair. Updated 12/12/07
Erratic brake pedal when abs light is on. *sd
Steering wheel is loose, feels like it could come. Air bag light is on, cruise controlnot working correctly. All these things are safety related and should be fixed. I think steering wheel should be repaired free of charge, since it's a major problem.
At high speed going around curve, experience momentary steering loss. (police car).tt
Police dept experienced trouble with steering of the vehicle while driving, steering makes popping noises,sometimes hard to steer while turning corners.
Steering shaft is bad, excessive rust to the u joint is causing vary stiff steering and steering wheel lock up in turns
While driving, at approx. 65-135mph, police package exhibits momentary loss of steering around corners, which causes extreme veering to left or right.tt
Went driving above (45) steering goes limp, this condition lasted for about (1) second, then steering comes back.this happens about once a week.
When coming off highway speeds into urban areas, particularly in parking lots, the steering fails, making it difficult to control. Dealer can't duplicate the problem.
Headlight lenses constantly turn yellow and cloudy, power window regulator cables constantly snap, excessive play in steering wheel, horn buttons too small and inconvienient and pop out at times, egr chamber always clogs every 40k miles and causes stalling condition.
Campbell county police department is experiencing a problem with the steering wheel and column when making a turn,the driver lost control of the vehicle.
The steering wheel pulls away when going around curves.
Anti-theft alarm system not installed properly, leaving trunk/hood unprotected.
This car has many failures. No safety defect listed.
Front driver ball joint design designed for failure, under normal use lower ball joint rapidly deteriorates and causes an unsafe environment for vehicle.steering becomes erratic and steering wheel feels loose.
Bearing in the pitman arm of the steering system may become excessively worn allowing the pitman arm to separate from the center link of the steering system without warning.driver would likely experience loss of steering control of vehicle - as per recall.two hours after scheduled appointment time for recall service, owner was informed that repairs could not be performed because they had no information on the recall.
Pitman shaft separates from arm, causing loss of control of steering. (third vehicle on 503161, 601414) *dh
Pitman arm assembly separated, causing loss of steering. *dh
Pitman shaft separates from arm, causing loss of control of steering. (first vehicle on 601414, 601415) *dh
Pitman shaft separates from arm, causing loss of control of steering. (second vehicle on 503161, 601415) *dh
Pitman arm worn almost to the point of failure. *dh
Pitman shaft separates from arm, causing loss of control of steering. *dh
Ball joint/ pitman arm separated, resulting in loss of steering.
Police package vehicle speed sensitive power steering; over 100 mph, steering appears to lock/stiff. Please describe details.tt
Experiencing intermittent power steering loss.tt
On a low speed turn, vehicle becomes very hard to steer, loss of power steering.
Police vehicle, loud noise when turning the steering to the left and right.
Vehicle is very hard to steer when you are mashing on the gas pedal. You have to let up off the pedal in order to steer the vehicle. Please describe details.
Power steering failure, when making turns the steering wheel will freeze.tt
Vehicle is very hard to steer when you are mashing on the gas pedal. You have to let up off the pedal in order to steer the vehicle. Please describe details.
#pe96-029; driving at high speed car over steers and causes the car to go into a skid. Please describe details.
Police dept experienced trouble with steering of the vehicle while driving, steering makes popping noises,sometimes hard to steer while turning corners.
I saw smoke coming from a cylinder under the brake booster.i then checked under the hood,the smoke simmerd and went out.just ariving home from work ,i said ill get it checked out tomorow.two hours later a neighbor knocked at the door, and said your car is on fire.
#pe96-029;had to replace pitman arm/ball joint (policedepartment, town of mccandless).
I saw smoke coming from a cylinder under the brake booster.i then checked under the hood,the smoke simmerd and went out.just ariving home from work ,i said ill get it checked out tomorow.two hours later a neighbor knocked at the door, and said your car is on fire.
While driving ball joints/pitman arm malfunctioned.was no prior warning. Vehicle was serviced by dealership before problem happened. Steering linkages were defective after havingvehicle checked.
Pitman arm failed. *sd
#pe96-29; has (5) police criusers. Had to replace pitman arm & ball joints in (4). Under 40,000 miles on vechicle.
#pe96-029: pitman arm fell apart on several cruisers. Please describe details.
Pitman arm broke. (1st vehicle on 483817,601370-601374)*sd
Ball joint/ pitman arm separated, resulting in loss of steering.
Police cars experiencing excessive play in pitman arms, found during inspection of 11 cars.
Pe96-029, active, pitman arm failure, discovered when checking the parts (other vehicle from 985920).
Pe96-029, active, on 3 vehicles experienced pitman arm failures, when ckecking the parts very looseandreplaced the part.
Excessive wear in pitman arm ball joint. (3rd vehicle on 505636)*sd
#pe96-029;had to replace pitman arm/ball joint (policedepartment, town of mccandless).
Pitman arm broke. (6th vehicle on 483817,503160,601370-601372,601374)*sd
Excessive wear in pitman arm ball joint. (4th vehicle on 505635)*sd
#pe96-029; when making left turn there is a pop like a joint is popped out. Only heard when making hard left turns, please describe details.
While driving on the highway, steering pitman arn broke, resulting in a steering loss.please describe details.*a
(4)severalcrown victoria's had to be repaired because of the pitman arms.please describe .
Pitman arm broke. (1st vehicle on 503164,601375-601378)*sd
Police cruiser package: pitman arm/ball joint seperation occurred 2 times.
Pitman arm broke.(2nd vehicle on 503164, 601375-601378)*sd
#pe96-029; had to replace pitman arm ball joints on both vehicles.
Pitman arm worn/unable to steer vehicle properly. (2nd vehicle on 601554)*sd
The contact owns a 1995 ford crown victoria.the vehiclehadthe same failure as mentioned in recall # 96v135000.in 2003, the vehicle accelerated,but the contact was unable to turn the steering wheel.the contact shut the vehicle off, and had it towed to the personal mechanic.the mechanic stated that the ball joints were corroded and detached from the sockets.in addition, the pitman arms were not lubricated.the manufacturer stated that there were no recalls on the vehicle.on april 8, 2007, the vehicle was involved in a crash.the insurance company checked the vehicle's history and stated that the vehicle was included in a recall.the contact called the manufacturer again, andwas still being informed that there was never a recall on the vehicle.the current mileagewas 89,200,and failure mileage was 49,200.the consumer states that there are 2 recalls for this specific car which are 98v322000 and the recall for steering listed above. The consumer states that the car was totaled while running into a ditch. Update 05/04/07
I saw smoke coming from a cylinder under the brake booster.i then checked under the hood,the smoke simmerd and went out.just ariving home from work ,i said ill get it checked out tomorow.two hours later a neighbor knocked at the door, and said your car is on fire.
Pitman arm broke. (4th vehicle on 503164, 601375-601378)*sd
Pitman arm joint failed; 1) separated from drag link; 2) very loose failing immediately. Please describe details.
Excessive wear in pitman arm ball joint. (2nd vehicle on 505633) *sd
When turned corner, noticed clunking noise, found pitman arm had nearly separated.
Loss of steering control, especially when changing lanes at highway speeds or making tight turns.can also occur when holding steering wheel straight.vehicle will have a noticeable "drift" or "shift" to either side, and seems quite dangerous.dealer found that a recall had been done (96s45), but that this vin was not included.the symptoms are exactly as described in recall 96s45.visuall inspection by mechanic verified that this was the problem, and that the vehicle is probably dangerous to drive.
Pitman arm worn/unable to steer vehicle properly. (1st vehicle on 506278,2nd vehicle on 601554)*sd
Pitman arm broke.(3rd vehicle on 503164, 601375-601378)*sd
Pitman arm broke. (4th vehicle on 483817,503160,601370-601374)*sd
Loss of steering control, especially when changing lanes at highway speeds or making tight turns.can also occur when holding steering wheel straight.vehicle will have a noticeable "drift" or "shift" to either side, and seems quite dangerous.dealer found that a recall had been done (96s45), but that this vin was not included.the symptoms are exactly as described in recall 96s45.visuall inspection by mechanic verified that this was the problem, and that the vehicle is probably dangerous to drive.
Pitman arm separating from the shaft, presenting possibility of steering loss.
Pitman arm broke. (1st vehicle on 601375-601378)*sd
Pitman arm broke. (5th vehicle on 483817,503160, 601370-601374)*sd
Steering pitman arm failure. *sd
Vehicle police, expericing steering problems, possible pitman arm problem, also front suspension being repaired.
Pitman arm worn/unable to steer vehicle properly. (1st vehicle on 506278)*sd
Pe96-029, active , pitman arm failure, discovered when checking the parts (other vehicle on (507840).
Excessive wear in pitman arm ball joint. (1st vehicle on 505634)*sd
Pitman arm separating at joint.
Pitman arm separated, after inspection found the separation of the arm. Transmission was also replaced, with low mileage.
Police vehicle. The pitman arm fell apart and loss of steering.please describe.
Pitman arm worn, causing steering failure. *sd
This a police vehicle. The vehicle had a shot pitman arm and it caused the steering of the vehicle to be off. Please describe.
#pe96-029; (4) vehicles had problem with pitman arm. Please describe details.
Loss of steering control, especially when changing lanes at highway speeds or making tight turns.can also occur when holding steering wheel straight.vehicle will have a noticeable "drift" or "shift" to either side, and seems quite dangerous.dealer found that a recall had been done (96s45), but that this vin was not included.the symptoms are exactly as described in recall 96s45.visuall inspection by mechanic verified that this was the problem, and that the vehicle is probably dangerous to drive.
#pe96-029: (6) out 0f (8) cars experienced steering problems, due to pitman arm. Please describe details.
During routine maintenance, when pitman arm was greased, joint popped out about 1/2 inches pe96-029. Vehicle is maintained per factory specifications by contracted vendor.
Police cars experiencing excessive play in pitman arms, found during inspection of 11 cars.
This is a police vehicle. The car has had steering problems due to the pitman arem falling out of the car. Please describe.
Four police vehicles are experiencing failures w/pitman arm/ball joint separating.
Steering had become erratic. Dealer replacedsteering linkage/ idler arm, and pitman arm. Please provide additional information.
Pe96-029 active, steering gear ball joint on the pitman arm, stopped while driving, loss of steering.
Pitman arm broke. (3rd vehicle on 483817,503160,601371-601374)*sd
Pitman arm worn out, discovered during routine check, could have separated from socket causing loss of steering control.
Pe96-029; 1 out 3 police vehicles have had pitman arm failures.durnign normal maintanence it ws discovered the pitman arm was loose at the ball socket so the dealer was contacted and they saud they would replace it, also the steering gear assembly was overhauled and idler arm and bracket assembly replaced, because the front end had to much slack and wanders, spool valve did not have all the balls betwern worm and rack.
Pe96-029 active,pitman arm failure, when inspected, parts falling off, also misalignment, resultin gin replacement of front tires.
Police cars, found 3 pitman arms defective, replaced all three.
Replaced loose pitman arm.
Excessive play in pitman arms found during inspection of vehicle. Please describe details.
Police car, pitman arm/ball joint let go, resulting in steering problems,in for repair.
Townson state police dept; the ball joint connecting the pitman arm is wearing out. Consumer feels it may separate from the socket.please describe.
Premature wear of pitman arm/ball joint due to lack of lubrication.
(streering) loose pitman arm. Please give more information
Pitman arm broke. (7th vehicle483817,503160,601370-601374)*sd
Loss of steering control, especially when changing lanes at highway speeds or making tight turns.can also occur when holding steering wheel straight.vehicle will have a noticeable "drift" or "shift" to either side, and seems quite dangerous.dealer found that a recall had been done (96s45), but that this vin was not included.the symptoms are exactly as described in recall 96s45.visuall inspection by mechanic verified that this was the problem, and that the vehicle is probably dangerous to drive.
Recall 96v135000 ; the pittman arm was not lubricated enough which caused the ball joints to become corroded.called manufacturer, but this vehicle is not included in the recall. *ml
Pitman arm broke.(2nd vehicle on 503160 and 601370,601374)*sd
Sudden failure of ball joints in ford passenger cars.
Pitman arm joint failure; arm separated from drag link, resulting in lost of steering control. Please describe details.
Pe96-029; 1 out 3 police vehicles have had pitman arm failures.durnign normal maintanence it ws discovered the pitman arm was loose at the ball socket so the dealer was contacted and they saud they would replace it, also the steering gear assembly was overhauled and idler arm and bracket assembly replaced, because the front end had to much slack and wanders, spool valve did not have all the balls betwern worm and rack.
Steering had become erratic. Dealer replacedsteering linkage/ idler arm, and pitman arm. Please provide additional information.
Two bolts holding brake assembly to spindle broke off.( first vehicle on 601597)
Two bolts holding brake assembly to spindle broke off. ( second vehicle on 508207)
Right inner/outer tie rods loose, causing steering problems.
Pe96-029; 1 out 3 police vehicles have had pitman arm failures.durnign normal maintanence it ws discovered the pitman arm was loose at the ball socket so the dealer was contacted and they saud they would replace it, also the steering gear assembly was overhauled and idler arm and bracket assembly replaced, because the front end had to much slack and wanders, spool valve did not have all the balls betwern worm and rack.
Safety recall 97s63, hood striker plate replacement. Ford says not this vin, but it failed!
When hitting a bump there is a noise in the rear passenger side trunk.tt
The contact owns a 1995 ford crown victoria. The contact stated that while driving approximately 5 mph, the driver side front fell to the ground and the tire buckled inward. The vehicle was towed to an independent mechanic where they advised him that the ball joint had come out from the socket and needed to be replaced. The vehicle was repaired. The manufacturer was contacted and they offered no assistance. The failure mileage was approximately 93,000.
I am trying to find out if this vehicle was used as a taxi/police vehicle and if any recall services were performed on it. Hyannis ford inc. Stated there were no recalls on this vehicle, but i saw many listed on this site, i have questions in regards to the suspension/airbags/torque converter,etc. Could you please tell me how i can find out if this vehicle has recalls on it and if i can get the work done. I had immediate problems with the vehicle when i bought it, and i don't think the dealer will give me straight answers. Thanks for any help or informationyou can give me.
While driving between 35-55mph, the vehicle will shudder and vibrate excessively.consumer has had the transmission fluid checked, also the no skip was checked.(neither has corrected the problem with the shuddering).*scc
The contact owns a 1995 ford crown victoria. The contact stated that while exiting a residential drive way, the driver's side front suspension ball joint fractured and separated from the vehicle. The manufacturer advised the contact that the vehicle was not included in nhtsa campaign id number: 98v322000 (suspension). The vehicle was not repaired. The failure and current mileage was 192,000.
The contact owns a 1995 ford crown victoria.the contact was experiencing steering failure.he stated that the ball joints were loose on the vehicle and should be tighter.the vin was excluded from nhtsa campaign id number 96v135000 (steering:linkages).the failure and current mileages were less than 140,000.
The alternator gauge,alternator and the window couldn't roll up, there is a popping noise in the front end .ttconsumer states the front end collapsed because of the dealerships reuse of a neoprene nut, also there is a popping noise in front end, fuel tank was replaced, alternator replaced, fuel guage on instrument panel replaced,rear passenger window would not roll all the way up, gas lid fills with water, replaced both arm bushings and correct toe end, cassette player does not work properly, and a malfunctioing head light switch.
Welds on the front of vehicle are not sufficient.
While parking consumer heard a clunk noise andsteering became very loose,and front wheels would not turn. Cause unknown.
Pe96-029 active,pitman arm failure, when inspected, parts falling off, also misalignment, resultin gin replacement of front tires.
When turning the corner car feels like it is floating , please describe .
Police vehicle, front suspension, when driving at any speed makes a loud noise,when making a left or right turn or on uneven highway.
I have a 1995 ford crown victoria with 83,000 miles on it. The control arm dropped and hit the road, causing loss of steering. Lucky for us we were going slow turning into a place of business, if we were going fast it could have been bad news. This car started a squeak on the front a little while ago, i guess it had something to do with it. I have noticed alot of 90's and some 2000's model fords have this same squeak. I contacted ford, and they said there was no recall on my model, i told them there should be.
The alternator gauge,alternator and the window couldn't roll up, there is a popping noise in the front end .ttconsumer states the front end collapsed because of the dealerships reuse of a neoprene nut, also there is a popping noise in front end, fuel tank was replaced, alternator replaced, fuel guage on instrument panel replaced,rear passenger window would not roll all the way up, gas lid fills with water, replaced both arm bushings and correct toe end, cassette player does not work properly, and a malfunctioing head light switch.
The alternator gauge,alternator and the window couldn't roll up, there is a popping noise in the front end .tt
1.i had just backed out of a parking spot, finished turning the car around to face forward and began approaching exit out of parking lot.i estimate speed at the moment of failure was less than five (5) mph.it is very fortunate that i was not going faster or i could have lost control of the crown vic,been killed, or killed someone else.as i began to approach the exit, i heard a sound of metal dragging on the street.i thought i accidentally ran over a metal shopping cart or someone on a bicycle.this is the type of metallic, dragging sound i heard.2.right-front wheel fell off of car whileapproaching exit.i looked under my car just after the incident occurred, within approximately one or two minutes as it was then disabled in the lot.i observed ball joint had popped out.3.ford replaced the following parts: arm asy fmc xw1z 3078 ba, kit-ste fmc f8az 3050 aa, joint asy fmcf7az 3049 aa, link fmc* f6az 5k484 aa, shield fmc* f5az 2k004 a, kit-sho fmc f8az 18124 ha, link spo* f6az 5k484 aa.i do not personally have any of the old parts that were replaced, perhaps ford does.
Need parts replaced. No safety defect listed within summary.
1995 crown victoria had a blow out on the expressway at 55 mph at about midnight after picking up our grandson from the airport don't know for sure if ball joint broke first or tire did my husband managed to get the car to the side of the road without hitting any thing. This happened may 24th 2009 the other ball joint just broke today august 16 2010car was going about 5mph when it happened today. What are the odds this was just a coincidences or this was a defect in manufacturing someone could have been killed. We were lucky.
The front suspension ball joints were replaced at my cost. They had started squeakingand were worn badly. My mechanic suggests that the entire front suspension be rebuilt for safety because ford does not have grease joints on any these parts. When the horn button was pushed for longer than a few seconds, it used to blow the fuse. The last time it did this, it also disabled the cruise control. I was told by my mechanic the only fix was to replace the steering column where these wires were shorting together internally.
While driving at 5 to 10 mph front passenger's side wheel came off due toball joints coming apart. Dealer has been contacted.*ml
Front suspension was popping and getting tight. Ball joints broke into two pieces, and the front of vehicle dropped down, totally disabling the vehicle.
Four police vehicles are experiencing failures w/pitman arm/ball joint separating.
Police car, pitman arm/ball joint let go, resulting in steering problems,in for repair.
While driving ball joints/pitman arm malfunctioned.was no prior warning. Vehicle was serviced by dealership before problem happened. Steering linkages were defective after havingvehicle checked.
Design of ball joints causes them to not have greased insert which resulted in ball joint failing collapsing the left front end of vehicle and puncturing the left front tire.nlm
Lower left control arm replaced. (2nd vehicle on 511309)
While driving the right lower control arm fell off the vehicle.
Both lower control arms of this vehicle have failed and require replacement for safety. Ford sates they have recalled 1997-1999 fords for the same defect and are unsure about extending the sefect recall to 1995. Ford admits that both arms should not fail or need replacement.
Severe front end noise is caused by the lower arms and the steering is off. Rubber booty is torn and the front end makes loud "pop" when steering to the left or right turns. This problem has been with the car since purchased and has been to the dealer on 3 occasions were they say there is no problem. I had a garage look at it and they informed me that the ball joints and or thr arms needed to be replaced. The dealership tells me that there is no problem. My warranty ends soon and am wondering if there are other complaints like this.
Lower left control arm replaced. (1st vehicle on 511310)
While driving 10 mphleft front of vehicle dropped onto wheel. Dealer determined lower ball jointbroke.
First of all i am not sure of the month we bought the car but it was in 1996. This is what happened.my daughter was over at the oregon coast andhad just pulled out of a parking lot when the left front lower ball joint came apart and the front wheel collapsed inward.luckily no one was injured and there was no body damaged.i called the dealership to find out if there was a recall notice for the vehicle.they said that there was not.on your web site i found two (2) recalls summarys: nhtsa campaign id numbers :98v322000 and 96v135000.these deal with the lower control arm ball joints and the pitman arms on the 1995 ford crown victoria. I asked the dealers in newport, or. And junction city, or and they claimed no knowledge of either one.in addition i was given an number for the main customer service office for ford back east.they didn't acknowledge the recalls either.both dealers i talked to suggested replacing all four of the ball joints (upper and lower) which i did.it cost $561.63.i had a towing bill of $142.00 and a cab bill of $57.75.i asked the dealer to be reimbursed at least of the repair and towing bills.they refused.if my daughter had been driving along at 55 mph and the ball joint came apart she could have been killed.if i had been driving the car and it came apart, i could have been killed. I have talked to several mechanics and they claim that this shouldn't have happened given the year of the car and miles driven. I feel that ford motor company should pay the repair bill at least.if this happened to me, it could happen to other owners of the 1995 crown victoria's, and it seems to have already since you have recalls summarys concerning them.
The contact owns a 1995 ford crown victoria.the vehiclehadthe same failure as mentioned in recall # 96v135000.in 2003, the vehicle accelerated,but the contact was unable to turn the steering wheel.the contact shut the vehicle off, and had it towed to the personal mechanic.the mechanic stated that the ball joints were corroded and detached from the sockets.in addition, the pitman arms were not lubricated.the manufacturer stated that there were no recalls on the vehicle.on april 8, 2007, the vehicle was involved in a crash.the insurance company checked the vehicle's history and stated that the vehicle was included in a recall.the contact called the manufacturer again, andwas still being informed that there was never a recall on the vehicle.the current mileagewas 89,200,and failure mileage was 49,200.the consumer states that there are 2 recalls for this specific car which are 98v322000 and the recall for steering listed above. The consumer states that the car was totaled while running into a ditch. Update 05/04/07
Front driver ball joint design designed for failure, under normal use lower ball joint rapidly deteriorates and causes an unsafe environment for vehicle.steering becomes erratic and steering wheel feels loose.
Sudden failure of ball joints in ford passenger cars.
The contact owns a 1995 ford crown victoria.the vehicle was a fleet.while driving between 5-10 mph, the front end of the vehicle dropped.the vehicle was towed to the dealer and they stated that the driver side lower ball joint separated.the manufacturer stated that the vin was not included in nhtsa campaign id number 98v322000 (suspension:front:control arm:lower ball joint).the purchase date was unknown.the failure mileage was 140,931 and current mileage was 141,000.updated 11/15/07
Dt: the front suspension lower control arm lower ball joints separated.this happened while driving 35 mph.there was a tiny bump in the road and the vehicle tilted to the right side lane.the vehicle was slanted to that side.there was a loss of steering.the vehicle was immobile at that time.a tow truck towed the vehicle to the contact's house and later to a mechanic.a recall was issuedconcerning the front suspension lower control arm lower ball joints.the contacts vehicle was not includedin the recall due tovinalthough thecontact's vehicleexperienced a similar problem.the mechanic replaced both lower ball joints.
The contact owns a 1995 ford crown victoria.the vehiclehadthe same failure as mentioned in recall # 96v135000.in 2003, the vehicle accelerated,but the contact was unable to turn the steering wheel.the contact shut the vehicle off, and had it towed to the personal mechanic.the mechanic stated that the ball joints were corroded and detached from the sockets.in addition, the pitman arms were not lubricated.the manufacturer stated that there were no recalls on the vehicle.on april 8, 2007, the vehicle was involved in a crash.the insurance company checked the vehicle's history and stated that the vehicle was included in a recall.the contact called the manufacturer again, andwas still being informed that there was never a recall on the vehicle.the current mileagewas 89,200,and failure mileage was 49,200.the consumer states that there are 2 recalls for this specific car which are 98v322000 and the recall for steering listed above. The consumer states that the car was totaled while running into a ditch. Update 05/04/07
Sudden failure of ball joints in ford passenger cars.
Check air suspension dash light. Ride control module failure also in lincolns. High temprature suspect. Please notify me.
Tire size 225/60 r16 , andhad a roofing tack in the tread.
Tire suddenly lost all air pressure and sidewalls detached from face of tire. Pressure was checked approximately 8 hours prior.i was enroute to emergency call.(tiresize: 255/70/r15)( dot number:tire size: 255/70/r15 )
While driving, when consumer applied brakes vehicle continued to accelerate.this resulted in consumer losing control of vehicle and running into a tree.please provide more details.ts
My engine checklight keeps going on.we have changed the pfe sensor, installed new egr sensor, and installed a new egr selenoid, along with changing the second sensor.still the "check engine" light goes on.i knowwhenthe light goes on because i can feel in wheni excelerate. Now i will be bring it to the mechanic for the 5 time next week.this egr has something to do with the air pollution, and it also effects my gas mileage.thank you for your time.
The alternator gauge,alternator and the window couldn't roll up, there is a popping noise in the front end .ttconsumer states the front end collapsed because of the dealerships reuse of a neoprene nut, also there is a popping noise in front end, fuel tank was replaced, alternator replaced, fuel guage on instrument panel replaced,rear passenger window would not roll all the way up, gas lid fills with water, replaced both arm bushings and correct toe end, cassette player does not work properly, and a malfunctioing head light switch.
Consumer complains that the overdrive light is not bright enough to be seen in daylight.
The front suspension ball joints were replaced at my cost. They had started squeakingand were worn badly. My mechanic suggests that the entire front suspension be rebuilt for safety because ford does not have grease joints on any these parts. When the horn button was pushed for longer than a few seconds, it used to blow the fuse. The last time it did this, it also disabled the cruise control. I was told by my mechanic the only fix was to replace the steering column where these wires were shorting together internally.
The contact owns a 1995 ford crown victoria. The contact stated that while driving 65 mph with the cruise control activated, the cruise control failed. In addition, the horn failed. The vehicle was not repaired or diagnosed. The manufacturer was notified of the incident. The vehicle was previously repaired under nhtsa campaign number: 08v051000 (vehicle speed control). The vehicle was not further repaired. The approximate failure mileage was 215,000.
Car has hesitation, bucking, seems to acceletrate on its own.
July 2006 my crown victoria caught on fire due to a brake switch and cruise control wiring problem i notified ford motor company to see if there was any recall or problem with such happenings they told me no.august 2007- i received a recall notice for my crown victoria that this problem does exist= i almost lost my car to this fire i had it repaired at my mechanic in july they same day the fire happened i had it flatbedded to his garage. In september 2007- i brought the recall letter and the bill to mantilla ford to see about a reimbursement for this problem just like the recall letter told me to do with all the appropriate bills etc.i was told by the service department at mantilla that they would give it to their regional manager and he will call me.. On october 26, 2007 i called mantilla because i heard nothing they said he would call me today well now october 30, 2007 i have heard nothing at all. I only want this problem resolved and reimbursement for a repair per the recall which i think i am entitled to. But i am having no satisfaction at all--can you help me don't understand why this problem happened to me in july and then in august i get a recall for the problem i just went through which was scary and costly i hope this is the right place to complain if not pls contact me or email me either way.
The contact owns a 1995 ford crown victoria.in august of 2007, the contact received a recall notice for the vehicle speed control.since that time, she has been informed every month thereafter that the parts would be available the following month.in january of 2008, she was informed that the parts would be available in february.there had been no failure to date.the purchase date, recall number, and powertrain were unknown.the current mileage was 163,000.updated 02-19-08 updated 02/19/08
The vehicle suddenly accelerated after pulling out of a drive way at approximately 20mph, vehicle stopped after hitting apole and both air bags deployed.tt
Steering wheel is loose, feels like it could come. Air bag light is on, cruise controlnot working correctly. All these things are safety related and should be fixed. I think steering wheel should be repaired free of charge, since it's a major problem.
Car has hesitation, bucking, seems to acceletrate on its own.
Speed sensor replaced. *sd
Replaced defective speed sensor.
The contact owns a 1995 ford crown victoria. The contact stated that while driving 45 mph, the vehicle suddenly accelerated to 85 mph. The contact applied the brakes but the vehicle did not respond. The contact had to shut the vehicle off while in drive in order to stop the vehicle. The contact referenced nhtsa campaign i.d. Number 08v051000 (vehicle speed control) and called the dealer, who stated that the vin was not included in the recall. The contact did not have a diagnostic test performed on the vehicle. The failure mileage was 181,000.
Consumer is in a stop position , vehicle is on ,vehicle will suddenly accelerate,causing the the rear wheel to spin, making smoke dealer cannot determine problem.
While driving at 65 mph cruise controlsafety switch failed.consumer parked the vehicle in driveway and the wiring caught on fire after being parked for aboutfive to ten minutes.consumer extinguished the fire, and vehicle was towed to dealer.
While vehicle was parked it caught on fire. Consumer stated the fire started in the engine compartment near the battery. It was the very same issue as the recall stated.
The contact owns a 1995 ford crown victoria. The contact was driving approximately between 60 to 70 mph and engaged the cruise control; however, the cruise control would not operate. The failure occurred after the vehicle was repaired under the nhtsa campaign id number 08v051000, vehicle speed control cruise control. The vehicle was taken to an authorized dealer where they refused to correct the failure. The contact stated that the cruise control was functional before the recall remedy repair was performed on the vehicle. The failure mileage was 51,717. Updated 09/28/10 the consumer also stated the air bag light illuminated after the cruise control was inspected. Updated 10/01/10
The contact owns a 1995 ford crown victoria.while the vehicle was parked in the carport, the middle of the steering wheel melted from the air bag module inside of the steering wheel.as a result, the air bag is hanging from the steering wheel and there is a strong smell present from the air bag melting the steering wheel.the contact received a recall notice for the cruise control, however, the dealer and manufacturer stated that there were no recalls for this defect.the vehicle has not been repaired.the nhtsa campaign id number and powertrain were unknown.the failure and current mileages were 147,000.
After turning into a parking lot with foot on brake the throttle stuck, causing vehicle to increase speed, causing an accident.please provide any details.
Both driver's and passenger's side windows were repaired on two occasions because the plastic cradle guide on bottom of glass kept breaking off. Also, in need of repairs again. Dealer notified. *ml
The alternator gauge,alternator and the window couldn't roll up, there is a popping noise in the front end .tt
Recall for power windows and head lamps. Recall #95s24.tt
Headlight lenses constantly turn yellow and cloudy, power window regulator cables constantly snap, excessive play in steering wheel, horn buttons too small and inconvienient and pop out at times, egr chamber always clogs every 40k miles and causes stalling condition.
Consumer states side windows do not work. Consumer states all three windows are now inoperable, the two rear windows failed to roll back up.
This is the second windshield failure due to stress cracks in less than five years on my 1995 ford crown victoria lx.i am reporting this so that it may prevent someone from becoming injured.
Possible design flaw of three windows on vehicle are inoperative. However, vehicle is out of warranty so repairs could not be done.
The alternator gauge,alternator and the window couldn't roll up, there is a popping noise in the front end .ttconsumer states the front end collapsed because of the dealerships reuse of a neoprene nut, also there is a popping noise in front end, fuel tank was replaced, alternator replaced, fuel guage on instrument panel replaced,rear passenger window would not roll all the way up, gas lid fills with water, replaced both arm bushings and correct toe end, cassette player does not work properly, and a malfunctioing head light switch.
Windshield wipers failed during rainstorm.aw
Defective wheel lugs, nuts and bolt fell off causing potential risk of loss of vehicle control. Please describe details.tt
Read more
