We found the following complaints for CHRYSLER TOWN AND COUNTRY (1993)
Read complaints for CHRYSLER TOWN AND COUNTRY (1993)
Airbags didn't deploy, and seat belts released on impact.driver's/passenger's and two captains seats, which are the middle seats, fell back to the floor .vanwas totaled.
Abs brakes failed and van would not stop.a on going problem that started in 1995 and still continues to the present 2003.dealership has had vechicle to repair problem everyyear until 2000.my abs bake light still comes on and i have had 10-ten complete brake jobs done to my van.the dealership has had my van for almost 2 years for repair and we could not use it.i need help brakes are failing again and just after 5000 miles.i can not get anyone to take my van in on trade for another vechicle.i need help so no one will be seriously injured.we have had to many near misses with the brakes failing.thank you robert phelps.
Brakes failed in winter/dealer kept vehicle 3 weeks!in april, i was driving, brakes went out/towed to dealership/no problem found/i picked up vehicle ,drove home and went to stop,no brakes!avoided near-collision by luck!went back to dealer/abs and brake lights on /the pump was out,for the 3rd time!dealer kept car 10 days/supposedly fixed!wife will not drive car/will not allow kids to drive it!now car is losing electrical power!brought it to dealer/can't find any problem!between dying out and sudden brake loss/we are unable to drive or sell the car,for fear of someone getting injured or dying!chrysler made note of it!maybe someone has to get killed before anything can be done!i
Battery failed.
Brake and abs light would stay on, and it was hard to press brake pedal. Took vehicle to dealer and he replaced abs pump ondecember 22, 2000. Abs pump went out again, and it was replaced, on24th, then relay went out.also,battery died.
Vehicle died out for no reason. Consumer noticed around cellular poles when it shut down.vehicle started to back up in neutral. Vehicle vibratedat any speed.
It appears power brakes and engine is turned off during brake application.tt
While driving vehicle lost power completely, consumer was unable to activate it.tt
Throttle cable froze due to itslocation near engine, and touching the hot engine.in addition, wires overheated, resulting in a fire. Rear abs brakes/overheated engine and radiatorwere replaced also.
Throttle cable froze in open position, causing vehicle to accelerate./loss of control.also,front/rearabs brakes failed prior to/after recall repairs.in addition, engine overheated, causing radiator to fail and wiring to burn.
While driving, smoke came out of the engine compartment, dealer stated that when the manufacturer assembled the wiring harness, all fusible links were taped together, causing it to get hot and melt, the heat generated the plastic to catch fire and burn all of the wires.
The fusable links were tightly bundled near driver side shock tower. The cooling fan motor siezed. The engine did not overheat due to operation at highway speed . The fuseable link in the center of the tight bundle burned, causing most of the others to also burn.this bundle was also atop the main wiring harnes, causing it to start to burn. Smelling something hot, i pulled over and opened the hood to find a small electrical fire. Being a firefighter i quickly disconected the negative battery cable causing the fire to go out. The fuasble links were tightly bundled at the factory. This is a dangerous situation that is simple to fix, by cutting the bundle and slightly spacing the fusable links out.
Electrical wire harness unde rthe hood caught on fire.
The contact owns a 1993 chrysler town and country. While driving uphill, the vehicle hesitated and, occasionally, the engine stalled. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of failure. The failure mileage was unknown.
Consumer was sitting still & there was a loud bang & antifreeze started leaking on the ground.water pump was changed last year because of the same transmission problem. Thiswas third time it has shut down. Dealer has been using rebuild transmissions. Consumer againwas responsible of paying for the cost.
Throttle cable froze due to itslocation near engine, and touching the hot engine.in addition, wires overheated, resulting in a fire. Rear abs brakes/overheated engine and radiatorwere replaced also.
I need my van running will . My kids and myself travel alot so i can't afford to have an accident due to a recall mulfunction on my vehicle.
Throttle cable froze in open position, causing vehicle to accelerate./loss of control.also,front/rearabs brakes failed prior to/after recall repairs.in addition, engine overheated, causing radiator to fail and wiring to burn.
On 3 separate occasions the fan belt has come off this van in rainy wet conditions. It could have caused accident if i had not had good upper body strength and know to exert extra force to steer vehicle. The first incident occurred at 80,000 miles . Chrysler dealer replaced tension pulley as it was diagnosed as problem. It occured again at 120,000 with tensioner pulley replaced at another auto repair shop and again at 130,000 miles.
The fusable links were tightly bundled near driver side shock tower. The cooling fan motor siezed. The engine did not overheat due to operation at highway speed . The fuseable link in the center of the tight bundle burned, causing most of the others to also burn.this bundle was also atop the main wiring harnes, causing it to start to burn. Smelling something hot, i pulled over and opened the hood to find a small electrical fire. Being a firefighter i quickly disconected the negative battery cable causing the fire to go out. The fuasble links were tightly bundled at the factory. This is a dangerous situation that is simple to fix, by cutting the bundle and slightly spacing the fusable links out.
Because the radiator fan engine went out and the plug burned into we need a new plug, but to our surprise chrysler says they won't sell the plug,but instead we will need to purchase the wiring harness at the tune of $800.00 which is the mechanic's cost.we were trying to find a plug at a salvage yard,but none are available.we were told that this part is in high demand because of the high failure rate.is chrysler making this part out of too light a material for the amount of current? if we can find one at a salvage yard they told us they sell them for $20.00.a friend is checking salvages in another state for us. Why won't chrysler sell them?why do they try to force us to buy a whole harness at the outrageous price of $800.00?the fan engine was $247.50and then $800.00 on top of that for the harness.quite an expensive repair.
Throttle cable froze due to itslocation near engine, and touching the hot engine.in addition, wires overheated, resulting in a fire. Rear abs brakes/overheated engine and radiatorwere replaced also.
Vehicle stalls while driving in hot temperatures without warning. Cause unknown.
While driving the steering just stopped working. Had the car towed to find out later that it was steering belt tensioner that caused the problem.tt
While driving in the rain engine pulley released the belts when gotten wet. Then steering wheel lock ed, and engine won't work without a prior warning.
Cylinder head failed.
Motor mounts failed.
The belt tensioner broke in half.tt
Belt tensioner broke while driving, loss of steering.tt
Motor mounts failed.
We have a 1993 chrysler town and country mini van, and discovered a few years ago about a well known problem these have, wet or even damp, the belts will be thrown off the engine causing everything from no charging to losing your power steering. I guess this is a problem that chrysler knows about , but will not correct. All that is needed is to replace the smooth pulley belt adjuster, to a pulley with sides that keep it on................my problem, my wife nearly wrecked recently when the belt came off while going around a curve on the highway when the belt came off. I am lucky i didn't get a call from the highway patrol that day. Chrysler needs to replace these pulleys. It costs around $150-170 for consumers to buy the kit, we shouldn't have too. How many people have to die before chrysler fixes this.
Automatic transmission shifting problem. Failure to shift in the 3rd gear upon driving in the speed of 40 mph on freeway. Also wining sound may hear upon driving on a freeway speed. Also, have hard to ship the gear uponstarting the vehicle. Engine hasvalve knocking problem too .
While driving at any speeds, the vehicle engine shuts down, causing the vehicle to stall.
The enginejust cuts off periodacally.all power is lost, causing us to lose steering ability.this usually happerns when we have taken our foot off of the gas pedal.the dealer said it was probably the throttle motor.it was cleaned, but it didi not help.this may be similar to complaint odi id, 812181.
Engine fails repeatedly. Also belt tensioner broke while driving in parking lot for no apparent reason.
Engine fails repeatedly. Also belt tensioner broke while driving in parking lot for no apparent reason.
Tensioner belt on the engine had snapped / broke while pulling out of driveway. Vehicle towed to dealer & was repaired. Then the driver's side seat belt locked up. It failed to release when trying to loosen it up. Consumer took vehicle back to dealer.
On 3 separate occasions the fan belt has come off this van in rainy wet conditions. It could have caused accident if i had not had good upper body strength and know to exert extra force to steer vehicle. The first incident occurred at 80,000 miles . Chrysler dealer replaced tension pulley as it was diagnosed as problem. It occured again at 120,000 with tensioner pulley replaced at another auto repair shop and again at 130,000 miles.
No summary listed for abov evehicle.
Evaporator, condensor, compressor, h-valve failures.
Motor mount crushed an air conditioning line causing air conditioner failure.
Evaporator, condensor, compressor, h-valve failures.
Air conditioner evaporator has failed due to internal corrosion causing
Motor mount crushed an air conditioning line causing air conditioner failure.
Air conditioner failed, o-rings were leaking and it needed freon.
The fog lamp lenses on my 1993 chrysler town & country minivan keep falling off. There is an engineering design defect in that the lens are glued in and not held in by screws.at about the 8-10 year time period, the glue deteriorates and the lens fall off while driving.this is a very common problem in all 1993 and 1994 chrysler town and country minivans.the local chrysler dealership wants $106 plus labor to replace a single lens. I have called and written to chrysler complaining about this problem, but they insist that since the vehicle is out of warranty, they can do nothing to help. I believe this to be a safety issue and request your assistance in getting chrysler to fix this problem.
While filling tank with gas, heard something running; gasoline was flowing out from under vehicle; was told, stopper in gas tank was not properly installed.tt
Gas gauge failed.
Driver unable to close and lockdoor. Also,passenger's door has to be lifted up to close properly. Dealer notified, and informed consumer that parts were not covered under recall, and repairs would only be made at consumer's cost.
Driver's side door does not latch. Door will swing open while driving. Dealer has been notified.
Hatchback bolts broke, causing it to fall on an occupant of the vehicle.occupant sustained minor injuries.the manufacturer has been notified.
Rear liftgate opened by itself while driving.tt
Latch gate opens while car is in motion or when door is unlocked.tt
Sometimes when driving, the rear hatch latch come open no one was hurt.tt
Upon coming to a stop, rear back latch flew open allowing item to fly out the rear door.tt
When driving the rear hatch latch opened, no one was hurt.tt
Having difficulty closing rear door, have to slam several times to close.tt
Rear hatch latch failed,causing rear door not to close well.
Vehicle on incline w/parking & emergency brakes on; vehicle started rolling down hill. Took to dealer & nothing found. Called zone office & manager arrive.had vehicle broken down, found park pawl defective. Pan was dropped; noticed transmission (park pawl) was broken. Park pawl was fixed,but not transmission. Informed owner would need to pay for transmission.
Transmission just went out.
Pedal gets stiff and hard until consumer has to pump it up in order to hold. Lights comes on dashboard intermittently. Dealership is aware of problem. When brakes fail, abs light illuminates, dealers have been unable to recreate fault codes, this failure did not occur until after recall repair 96v099, on one occasion, brakes failed completely and brake fluid spewed from the master cylinder all over, the emergency brake also illuminated, dealer replaced abs pump piston assembly, abs dual function switch, and abs accumulator package, this was all done when recall was completed, dealer stated to redo recall work.speedometer reads high, it is reading more miles than what is being driven.
When driving at 40 mph consumer noticed noise coming from the front end. Vehicle went into neutral, andthere was loss of acceleration. Consumer contacted the dealer. Dealer linked the problem to the transmission. Please provide any further details.
I need my van running will . My kids and myself travel alot so i can't afford to have an accident due to a recall mulfunction on my vehicle.
While driving 25 mph vehicle caught on fire inside of the transmission.due to severe fire damagevehicle was totaled. No injuries reported.
Transmission seals failed, causing transmission to shift improperly.
Transmission failed to downshift.
Transmission bangs into drive or reverse from neutral gear, also sluggish when shifting from 2nd to 1st gears.*skd
Consumer was sitting still & there was a loud bang & antifreeze started leaking on the ground.water pump was changed last year because of the same transmission problem. Thiswas third time it has shut down. Dealer has been using rebuild transmissions. Consumer againwas responsible of paying for the cost.
Transmission failure l/r clutchnoe in limp home(unsafe).
Vehicle on incline w/parking & emergency brakes on; vehicle started rolling down hill. Took to dealer & nothing found. Called zone office & manager arrive.had vehicle broken down, found park pawl defective. Pan was dropped; noticed transmission (park pawl) was broken. Park pawl was fixed,but not transmission. Informed owner would need to pay for transmission.
Reporting auto transmission failure; had three replacement from 70,515 miles and all replacement was done by the same dealer. Can nhtsa share some light on this matter.
Automatic transmission shifting problem. Failure to shift in the 3rd gear upon driving in the speed of 40 mph on freeway. Also wining sound may hear upon driving on a freeway speed. Also, have hard to ship the gear uponstarting the vehicle. Engine hasvalve knocking problem too .
Transmission slips out of gear during acceleration.tt
Abs brakes failed and van would not stop.a on going problem that started in 1995 and still continues to the present 2003.dealership has had vechicle to repair problem everyyear until 2000.my abs bake light still comes on and i have had 10-ten complete brake jobs done to my van.the dealership has had my van for almost 2 years for repair and we could not use it.i need help brakes are failing again and just after 5000 miles.i can not get anyone to take my van in on trade for another vechicle.i need help so no one will be seriously injured.we have had to many near misses with the brakes failing.thank you robert phelps.
Transmission failed.*skd
The transmission sometimes sticks when going into gear. Please describe .
Tensioner broke with serp belt i stated it was faulty asked for reimbursed on repair with chrysler custormer service, turned down.
After driving for 10 hours the vehicle starts to downshift by itself. Dealer can't find the problem.
Transmission failed.
Consumerhad problem regarding repeated replacements of transmission.
Continuous transmissionoil leak. Cost to repair is $800 to 1000. Do not expect this to occur with only 112,000 miles.
Continuous transmissionoil leak. Cost to repair is $800 to 1000. Do not expect this to occur with only 112,000 miles.
Reoccurring problem with left front axle needing replacement. Replaced three tofour axles due to defect in cv joint.axle kept coming out or disconnected from the joint of the cv booth. Dealer notified/ independent repair shop making repairs. Please provide further details.
Vehicle gets locked in 2nd gear.took to dealer, and they said clutchwas slipping.
Reoccurring problem with left front axle needing replacement. Replaced three tofour axles due to defect in cv joint.axle kept coming out or disconnected from the joint of the cv booth. Dealer notified/ independent repair shop making repairs. Please provide further details.
Transmission failure.
Vehicle gets locked in 2nd gear.took to dealer, and they said clutchwas slipping.
Transmission failure.
Transmission is slipping.
Transmission failure two weeks after complete tune up.
Lap/shoulder belt in rear seat outer seat and the captain chairs by the door torn and cut.
The driver's seatbelt anchor will not come out, causing theseatbelt to be inoperative, which will not protect the occupant in theevent of anaccident. Currently at dealer.please provide details.no prior problems.
Tensioner belt on the engine had snapped / broke while pulling out of driveway. Vehicle towed to dealer & was repaired. Then the driver's side seat belt locked up. It failed to release when trying to loosen it up. Consumer took vehicle back to dealer.
Driver's seat belt will not retract. Fastener got shut in the door and broke.
Front passenger's seat does not release from the seat track mechanism.cause unknown.please give any further details.
Airbags didn't deploy, and seat belts released on impact.driver's/passenger's and two captains seats, which are the middle seats, fell back to the floor .vanwas totaled.
The contact owns a 1993 chrysler town and country. While driving, the brakes hesitated to respond and caused an extended stopping distance. The vehicle was diagnosed by an independent mechanic who stated that the brake actuator piston assembly failed. After contacting the dealer and manufacturer in reference to nhtsa campaign number: 96v099000 (service brakes, hydraulic), the contact was informed that the lifetime recall warranty for the brake actuator piston assembly and the pump motor assembly would not be honored. The failure mileage was 245,000.
The contact owns a 1993 chrysler town and country. The contact stated that the abs brake warning light illuminated and when depressing the brake pedal the abs activated erroneously. The vehicle was taken to a dealer where they refused to repair the vehicle under nhtsa campaign number: 96v099000 (service brakes, hydraulic) due to the year of the vehicle. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 101,000.
The contact owns a 1993 chrysler town and country mini van. The contact stated that the abs warning light continuously illuminated on the instrument panel. The vehicle was taken to the dealer. The abs system was replaced at the recommendation of a chrysler dealer. The manufacture was contacted about the failure. The failure mileage was 43,000 and the current mileage was 75,000.updated 08/25/14*lj updated09/5/2014
The contact owns a 1993 chrysler town and country. The contact stated that the brake booster was malfunctioning and it was very difficult to stop the vehicle when driving. The contact called the manufacturer who stated that there were no recalls; however, there may be coverage via an extended warranty. The manufacturer had not called the contact back to confirm if the brake booster parts were covered. The manufacturer stated that they would only offer partial reimbursement if the vehicle were towed to a dealer. The dealer was not contacted. The vehicle was not repaired. The failure mileage was 139,552. Consumer stated parts still unavailable for repair. Updated 12/18/18
Recall on breaking system 01-19-1996 fca#685 nhtsa # 96v-099 lifetime replacement of parts .parts no longer availablecase # crysler #30082328 asked for compensation to purchase a used vehicle since brakes cannot be repaired . All the van needs is brakes the millage is low engine and trans good interior and exterior of body good.
The contact owns a 1993 chrysler town and country. While driving various speeds, the contact had to use both feet to depress the brake pedal. The contact stated that the abs and brake warning indicators illumined. The vehicle was previously repaired per nhtsa campaign number: 96v099000 (service brakes, hydraulic). The vehicle was taken to courtesy chrysler dodge jeep ram of superstition springs (located at 6130 e auto park dr mesa, az 85206, 480-569-2991) where it was diagnosed that the actuator piston assembly and the pump motor failed and needed to be replaced. The manufacturer was notified and stated that they did not make faulty parts. The failure mileage was 200,000. The vin was not available.
Brakes failed in winter/dealer kept vehicle 3 weeks!in april, i was driving, brakes went out/towed to dealership/no problem found/i picked up vehicle ,drove home and went to stop,no brakes!avoided near-collision by luck!went back to dealer/abs and brake lights on /the pump was out,for the 3rd time!dealer kept car 10 days/supposedly fixed!wife will not drive car/will not allow kids to drive it!now car is losing electrical power!brought it to dealer/can't find any problem!between dying out and sudden brake loss/we are unable to drive or sell the car,for fear of someone getting injured or dying!chrysler made note of it!maybe someone has to get killed before anything can be done!i
I have had the recalled abs pump replaced 6 times in the last 25,000 miles.this includes replacing this part 4 times in the last 3 months.new parts last as little as 22 miles.chrysler tells me to find another dealer.i do not trust this car or its brake system any longer.mr
The contact owns a 1993 chrysler town and country. The contact stated that the abs brake warning light illuminated and when depressing the brake pedal the abs activated erroneously. The vehicle was taken to a dealer where they refused to repair the vehicle under nhtsa campaign number: 96v099000 (service brakes, hydraulic) due to the year of the vehicle. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 101,000.
The contact owns a 1993 chrysler town and country. The contact stated that the abs and the emergency brake lights flashed then suddenly remained illuminated. In addition, the brake pedal required excessive force in order to stop the vehicle. The failure occurred on several occasions. The vehicle was towed to an authorized dealer, who diagnosed that the abs dual pressure switch or the abs dual function switch needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure and informed that the vin was not included in nhtsa campaign id number: 96v099000 (service brakes, hydraulic). The approximate failure mileage was 77,000.
The contact owns a 1993 chrysler town and country.the contact stated that the vehicle was covered by a warranty repair that chrysler does not honor. The dealer repaired the brakes; however, the failure recurred in two months. The dealer replaced the master cylinder, pressure motor, and pump motor assembly. The contact took the vehicle back to the dealer and was told that some of the components on the vehicle were missing. The contact is concerned about the safety risk since the mounting bracket assembly was not attached to the vehicle. The vin was not available. The failure mileage was 125000 and the current mileage was 126000.
Dt*: the contact stated the abs brake lights illuminated and while stopping the vehicle from 25 mph, the brakes became difficult to apply.the vehicle was taken to an independent mechanic shop, who determined that the abs brakes needed to be replaced under nhtsa recall #96v099000, regarding service brakes, hydraulic:antilock.the vehicle was towed the dealer who refused to examine or perform repairs, because the vehicle was not included in the recall due to the vin.the vehicle was towed back to the residence, and no repairs were made. Updated 11/30/2006 -
Brake and abs light would stay on, and it was hard to press brake pedal. Took vehicle to dealer and he replaced abs pump ondecember 22, 2000. Abs pump went out again, and it was replaced, on24th, then relay went out.also,battery died.
Abs & brake lights 'on' and no braking.sometimes abs & brake lights are 'on' and braking is normal. Dealer finally performed recall #685. Brakes were ok for 11 months. Orig. Problem is back. Dealer will not fix. Recommended i go to a independant garage for repairs. Have not been able to find anyone willing to work on the abs-10 brake system.
Abs system failure, excessive long stopping distance, replaced abs system.tt
While depressing the brakes vehicle continued totravel. Please provide further information.
Throttle cable froze in open position, causing vehicle to accelerate./loss of control.also,front/rearabs brakes failed prior to/after recall repairs.in addition, engine overheated, causing radiator to fail and wiring to burn.
Abs: anti lock system pump and motor replaced; annoying noise, when braking; brakes do not grab properly; vibrates; so far, brakes have not failed.tt
Request for reimbursement for repairs performed to abs system.*mrwhile driving the abs light and brake light illuminated.the vehicle was taken tot he dealer where it was determined that the abs pump failed.about eight months later the brakes failed and the vehicle was taken to the dealer.
Abs and brake lights 'on,' and no braking.sometimes abs and brake lights are 'on' and braking is normal. Dealer finally performed recall #685. Brakes were ok for 11 months. Orig. Problem is back. Dealer will not fix. Recommended i go to a independent garage for repairs. Have not been able find anyone willing to work on the abs-10 brake system.
Recall 96 v 099 000abs brake repairsfailed 3 times after the recall parts were replaced. At time of the last failure it almost caused an accident because the vehicle experienced extended stopping distance when brake pedal was depressed.
Ea94-028 active, brake failure, complete loss of brakes, to stop vehicle turn off ignition (abs).tt
While drivingconsumer would step on the brakes, and they would make a loud grindingnoise, like metal to metal. Consumer was concerned.
Consumer was traveling about 40-45mph,brake light & the abs light came on and brakes failed.emergency brake had to be used to slow down or stop. Dealer said condition could be caused by the hydraulic pump or pump switch going out.pump has lifetime warranty & pump switch is no longer covered under warranty. Dealer wants consumer to drive vehicle at his ownrisk to see if problem will occuragain.*ml
Abs system failure, loss of braking ability in cold weather.tt
Dt*:the contact stated while driving 35 mph, the vehicle's hydraulic brakes malfunctioned even with the use of both feet applied to the brake pedal.the vehicle's had an extended stopping distance whenever the brakes were applied.the brake light remained illuminated during normal driving conditions. The design was all 4 wheel antilock brakes.the vehicle was taken to the service dealer who determined that the abs failed due to an electrical problem but the computer would not comply.also, the manufacturer was notified and provided the same information as the service dealer.the contact diagnosed the problem and fixed the vehicle under recall# 96v099000.
Consumer had to repairanti- lock brake system 2 weeks ago without warning while driving 65 mph. Vehicle hit a side rail.dealer has been notified about problem.
The vehicle was repaired under abs recall, since the repair the vehicle experienced abs failure.the vehicle is being repaired under waranty. Manufacturer has been notified.
The contact owns a 1993 chrysler town and country.the contact stated that the abs indicator remained illuminated on the instrument panel.she took the vehicle to the dealer and they stated that the previous owner already had the vehicle repaired according to nhtsa campaign id number 96v099000 (service brakes, hydraulic:antilock).the contact paid for the repairs out of pocket and the dealer replaced the filter module, brake rotors,and brake caliper.the repair corrected the failure for approximately one year, but it has recently recurred.the abs indicator illuminates randomly.the contact is upset because the failure has occurred twice and she believes that the dealer is repairing the vehicle with a defective part, which causes the problem to recur.the failure mileage was 45,000 and current mileage was 51,000.updated 02-23-09the abs module had an internal failure and the abs accumulator had lost its precharge.. Updated 02/25/09.
The abs system has failed. The brakes went out completely a few times. Please describe.tt
Abs brakes failed to stop vehicle when applied causing vehicle to skid.tt
The anti-lock brake system failed, which caused the vehicle to experience extended stopping distance.
Experiencing extended stopping distance with abs.tt
Consumer states there was a recall on the abs actuator #96v099, vehicle was then inspected and found to be okay, consumer stated he was informed that if it ever failed for the life of the vehicle it would be replaced free of charge, consumer states a few weeks ago the brake pedal fluctuated and had been acting irregular, at times there are sounds coming from the actuator when it is operating and its sounds like it is not acting properly and the abs warning light illuminated after any driving of the vehicle, vehicle was taken to mechanic and there were no problems with the brakes, however mechanic stated it sounded like the actuator or abs was not functioning properly.
Abs system failure, total loss of braking ability.tt
While driving on wet pavement the abs brake light illuminated ,indicating malfunction within thesystem. Shortly after driving on wet pavement the pedal traveled to the floor, causing extended stopping distance. Cause unknown.please give any further details.
Dt*: the contact states there isnhtsarecallcampaign 96v099000regarding theabsbrakes. The parts needed to repair the vehicle are not available at the local dealership.the contact spoke to the manufacturer, who has confirmed that parts were not available.
Antilock brake system pump failed twice, causing extended stopping distance. *dsh
#ea94-028 in dry weather at two times went to apply the brake there were no brakes once went trough a stop sign .tt
Abs: abs light and brake came on; brake pedal was vibrating and making hissing noise; brakes hesitated; extended stopping.tt
After the work had been performed under the recall, the abs system failed twice again. Please describe details.
Anti lock brakes failed before recall repair, but dealer states parts that need to be replace are not part of recall.
Recall #96v099000, after contacting the dealer consumer has been waiting for parts for over (2) months. Dealer did work on abs, but vehicle is not working properly. The abs warning light is on.
Purchase truck new the abs anti-lock brake light kept on when apply the brake is soft been to dealer five times.tt
The contact owns a 1993 chrysler town and country van. In 2003 the vehicle was taken to the dealer for recall 96v099000 service brakes, hydraulic: anti-lock. In march 2010 the contact noticed that she had to increase the stopping distance while driving various speeds. The vehicle was taken to a local mechanic who stated that the failure was caused by the anti-lock system whichneeded to be replaced. The manufacturer was notified and stated that they would not offer any assistance with the repairs because the vehicle was over 100,000 miles. The warranty was not a life time warranty as stated in the recall. The failure mileage was 125,000 and the current mileage was 137,385.
Antilock brakes failed.
Consumer received recall 96v099000 concerning abs brake failure.consumer had a concernthatabs light stayed on,illuminating while driving, and the brake pedal will not depress. Vehicle had been todealer on three separate occasions, but problem recurred.
Brake pedal went to floor, no braking, went thru intersection. Pedal came right back. Drove car 1/4 mile to home, called local service dealer. Dealer has car 1 week, says can't duplicate problem and won't do any of the 3 abs recalls involved. This is a well documented problem, safety recall and symptom. It is also well document that dealers run owners around the "can't duplicate" excuse. The pump is deterioating and fouling the cylinder and piston causing an intermittent (pedal to floor)problem in the early stages of total brake failure. Need to get the recall fix performed before people are killed. Spoke to daimler chrysler recall center and cc csr - no help. Can you help me get this done?dt
On-going / intermittent problem with brake system working erratically; when brakes are applied the pedal would be hard, which causedextended stopping distance. Consumer would place gear into neutral and applied brakes to get vehicle to stop. Dealer notified andinformed that nothing could be found.
Recall no.#96v099000, hydraulic anti-skid system:the manufacturer continued to replace the defective part with the same exact part. The part was replaced five times with in a two year period.
Abs brakes failed 5 times.
No summary listed for above vehicle.
Dealer wanted owner to pay for recall repairs on anti lock brakes.
The abs system has failed. When the brake was applied the pedal was hard and took an excessive amount of time to stop the vehicle. Please describe.tt
Abs warning light came on due to failed abs pump/motor, pistons, and switch. *dsh
Rio rancho chrysler dealer, located at 25 rio rancho rd., pomona, california 91766, in cooperation with the chrysler corporation has caused the following:a.failure to correct the abs system leak and resulting abs light coming and staying on. Within days of dealer??s repair work, the leak and abs light problems were discovered. Now the dealer states it to be a new problem that occurred during the couple of days of dealer??s work. The dealer says the new problem is the shorted abs pressure switch, with a replacement cost of $565. The dealer further asserts the newly discovered shorted abs switch has rendered abs pump inoperative and causing the leak from brake fluid reservoir. The dealer is wrong on both counts. The abs system works well so long the brake fluid level is adequate, and the leakage is not from reservoir cap but from somewhere else in the abs system, which was not corrected the first time.b.the repair should have been part of nhtsa recall 96v099000, without any charge to the owner. However, the dealer, in concert with chrysler corporation, replaced the abs accumulator without any factual basis and charged the vehicle owner $521.88 for it. Even if one assumes that the accumulator needed replacement, there should not be a $274.38 charge for labor. Because it??s dismantling and remounting is part of abs piston, pump and motor replacement, which by dealer??s own assertion was covered under the above recall.c.the dealer in it??s quest to milk, gouge and hose the customer for more money, deliberately left the tps connecter ajar despite a second visit by the owner, rendering the vehicle unsafe stalling at or near idle speed in traffic and on highways.
Abs brakes failed and van would not stop.a on going problem that started in 1995 and still continues to the present 2003.dealership has had vechicle to repair problem everyyear until 2000.my abs bake light still comes on and i have had 10-ten complete brake jobs done to my van.the dealership has had my van for almost 2 years for repair and we could not use it.i need help brakes are failing again and just after 5000 miles.i can not get anyone to take my van in on trade for another vechicle.i need help so no one will be seriously injured.we have had to many near misses with the brakes failing.thank you robert phelps.
Abs system was loud, brake pedal would stick, and liners started to smoke .tt
Consumer states there was a recall on the abs actuator #96v099, vehicle was then inspected and found to be okay, consumer stated he was informed that if it ever failed for the life of the vehicle it would be replaced free of charge, consumer states a few weeks ago the brake pedal fluctuated and had been acting irregular, at times there are sounds coming from the actuator when it is operating and its sounds like it is not acting properly and the abs warning light illuminated after any driving of the vehicle, vehicle was taken to mechanic and there were no problems with the brakes, however mechanic stated it sounded like the actuator or abs was not functioning properly.
Abs indication light flashes intermittently,vehicle would lose all braking ability.please provide further information.
Abs anti-lock brakes failed three time on this van,alsowarning light came on and fail .tt
Took to dealer and they said that the abs system failed but would not warranty the parts and i would have to pay $2000. For the repairs of a recalled problem in these vehicles.
Ea94-028, active, abs brake light continuously stays on, in for repair makes a noise when applied.tt
Brake system failure, partial loss of braking, vehicle equipped with abs brakes .tt
Got recall notice 96v099000/ manufacturer's recall 685, and had recall repairs done. However,problem still exists. Had to have recall repairs done over at least 3 times.
The front brakes are anti-lock brakes and they locked up when applied. Please describe.tt
While braking to exit abs light came on and brakes locked up.tt
Driving along , pulled off highway because of an accident. When started back onto the highway there were no brakes, brake pedal pushed completely to the floor and there were no brakes at all. Consumer states vehicle had been at dealership per an abs recall 3 days before the system failed , dealership which did the repairs found the abs system was totally worn because of a defect and felt the system was never evaluated properly by dealership, dealership is not taking any responsability for the mishap.
Abs light came on at 55-60 mph, consumer applied brakes pedal felt hard,and there was extended stopping distance. Dealer cannot duplicate the problem.
On three occasions w/abs and master cylinder, brakes had total failure.brakes have failed right after being repaired the next day. Please describe details.
The owner is having problems with the abs system.ttabs light illuminated, dealer states there was no problem, however later brakes failed, this time dealer replaced piston assembly in abs, brakes failed again and this time dealer replaced the abs pump, consumer no longer owns this vehicle.
1993 town and country mini van anti lock brake system has failed on numerous occasions.the consumer stated the abs and brake warning light illuminated . In addition, the brake pedal became difficult to depress.the accumulator, pump motor, abs pump, and relay were all replaced, however the problem continued.the dealer stated the problem could not be determined and /or not repairable.
Abs system failure, indicator light turned on, partial loss of braking.tt
Vehicles abs braking system intermittently fails prior to a loud boing noise was heard.pedal would go to floor and become very hard.(ea94-028).tt
Front brakes engaged without warning while vehicle was merging onto highway.vehicle has been checked by dealer.abs module that control abs system is faulty.
Abs, brake failure, loss of effectiveness, have no brakes ea94-028 active.tt
Throttle cable froze due to itslocation near engine, and touching the hot engine.in addition, wires overheated, resulting in a fire. Rear abs brakes/overheated engine and radiatorwere replaced also.
Vehicle experienced a problem with the abs brake system. Driver was unable to push the brake pedal down before starting the vehicle. There was a short in the controller anti-lock brake system. Owner contacted the dealer, who said the parts needed to repaired. This defect was no longer available through chrysler.
Recall # 96v099000 chrysler/brakes;hydraulic anti-skid system. Owner was having problems with brakes. When van was taken to the dealership owner was informed that van was included in recall,but parts would not be available for three weeks. Dealer could not release van to owner because of liability, and would not provide a loaner.
While driving applied the brakes , once brakes were applied they failed,resulting in extended stopping distance and loud noises before stopping.
Abs system failure, abs indicator light comes on, total loss of braking.tt
Consumer had abs recall work performed (#685) but dealer chared for a replacemnt accumulator switch which was not covered under recall/refused.nlm
Abs braking system fails, warning lights come on and then brake pedal becomes very hard, causing extended stopping distance.(ea94-028)
When driving at 30-40 mph and upon coming to a graudal stop andwhen depressing brake pedal,pedal was very hard, causing extended stopping distance. Consumer has contacted dealer..ett.
Pedal gets stiff and hard until consumer has to pump it up in order to hold. Lights comes on dashboard intermittently. Dealership is aware of problem. When brakes fail, abs light illuminates, dealers have been unable to recreate fault codes, this failure did not occur until after recall repair 96v099, on one occasion, brakes failed completely and brake fluid spewed from the master cylinder all over, the emergency brake also illuminated, dealer replaced abs pump piston assembly, abs dual function switch, and abs accumulator package, this was all done when recall was completed, dealer stated to redo recall work.speedometer reads high, it is reading more miles than what is being driven.
The brake light and abs light illuminated, and all of a sudden the vehicle had no brakes, consumer had to hit a curve to stop the vehicle.
Dt*:the contact stated the brakes on the vehicle completely failed.there is a recall, #96v099000 concerning the antilock brakes; however the dealer informed the contact the failure was not part of the recall.an independent repair shop indicated the failure was in fact the recalled part.
There was a recall, 96v099, issued regarding the abs actuator, piston and pump.consumer had no abs problems until the repairs were made per recall.since then, consumer has had three abs failures.the first two were sudden and unexpected causing a near miss.the vehicle was repaired following both failures.the third failure has consumer's confidence in the competency of dodge to correct the problem.consumer is requesting information on abs components and how they work and a full disclosure as to why the recall occurred in the first place.*jg
When applying brakespedal went to the floor,resulting in extened stopping distance. Dealer will be notified. Feel free to provide any further infromation.
Anti lock brakes not working properly-when brakes are applied you have to pump them-they do not catch.tt
The brakes intermittently fail and the abs light illuminates, this vehicle did not have brake problems until taken to the dealer for recall repair 96v-009, now the dealer can not duplicate the problem therefore can not locate or eliminate the malfunction.nlm
The abs system on the truck has failed. The pedal goes to the floor and will not stop the truck. Please describe.
Ongoing / intermittent problem with brake system: whenever brakes are appliedvehicleexperiencesextended stopping distance because pedal appears hard when applied. Dealer notified, and informed consumer that nothing couldbe found.
I had right front wipers repaired by a repair shop (r&r wiper transmission and wiper link and bushings) at a cost to me of $162.56. Marong repaired wiring at dual function pressure switch and replaced switch in order to correct my abs problem; and they charged me $200 deductible.marong also replaced my front axle ($171.73)to correct a problem i had since i owned the van.
There's a loud clicking noise coming from brakes, and brakes feel different. Consumer can feel a difference inbrakes when braking. Consumerreceivedrecall 96v099000. Dealer will not fix it under the recall becauseabs on this vehicle is not part of the recall.tone ring on axle is broken and caused loss of abs..
There is96v099000; dealer claims thatrecall repairs have been done already, butremedy that was used has not helpedvehicle at all.
Consumerreceived recall 96v099000 forabsfailure.dealership was going to chargeconsumer $240 to run a diagnostic onvehicle beforerecall was tobe repaired.consumer stated thatabs light was coming on , and brakes do not completely bringvehicle to a stop.please provide any additional information/attachments.
I need my van running will . My kids and myself travel alot so i can't afford to have an accident due to a recall mulfunction on my vehicle.
Recall work completed on the abs system however failed on two occasions after work completed.
Abs light came on while driving brakes went completely out.tt
Consumer took vehicle in for recall involving the abs brake system, recall no. 96v09900. Problem has been corrected four different times, but problem remains.
The contact owns a 1993 chrysler town and country mini van. The contact stated that the abs warning light continuously illuminated on the instrument panel. The vehicle was taken to the dealer. The abs system was replaced at the recommendation of a chrysler dealer. The manufacture was contacted about the failure. The failure mileage was 43,000 and the current mileage was 75,000.updated 08/25/14*lj updated09/5/2014
The contact owns a 1993 chrysler town and country.the contact attempted to brake from 45 mph but the vehicle would not respond. The abs warning light was illuminated and the contact applied repeated steady pressure to the brake pedal until the vehicle came to a stop. The failure recurred intermittently. The manufacturer advised that the vehicle was previously repaired under a recall campaign (nhtsa campaign id number: 96v099000- service brakes, hydraulic: antilock) and would not take the liability for any further repairs. The vehicle was not repaired.the failure mileage was 121,600 and the current mileage was 122,000.
Recall 96v099000/685. The abs brakes have failed three times, without prior indication. Repairwork was done each time, and thebrakes failed two times after the repairs were done. Dealer contacted and is aware of the problem. Manufacturer contacted and cannot duplicate the problem.
Anti-lock brake failure.
Recall 96v099000, manufacturer's recall 685;the abs brakes and the regular brake lights come on.loses braking power intermittently. Brakes go off, and after a while they would brake okay.this has occurred approximately eight times, and the dealer cannot duplicate the problem.
Abs brakes fails to stop vehicle effectively when applied causing extended stopping/inoperative. Please describe details.tt
Vehicle been experiencing problem with abs system; intermittently brake would experience extended stopping distance; also, when brakes are applied the vehicle felt as if it was running on ice ( sliding ). Dealer notified and informed consumer nothing could be found. Seeking help from nhtsa in this matter.
During brake application no response from anti lock braking system.tt
Was drivingwhenabs light came on. Had appliedbrakes to slow down &brakes failed to stop vehicle.problemhas been intermittent. Had taken vehicle to dealership & mechanic tried to repair problem of the abs brake light, but it was not resolved.consumer had abs replaced prior to this system and experienced the exact same problems as now.
Ea94-028 active, abs brake failure, loss of effectiveness, pedal goes to the floor without warning.tt
The abs system pump and accumulator have not been working. Please explain.tt
Recall#96v099000 concerning abs control unit/module.the dealer would do repairs, but was charging for the replacement of the part. Dealer stated that brake problem would not be solved without replacingabs control unit/module. Consumer requesteda call back.manufacturer would not cover that part because it was not within the warranty time period.
Brake/abs warning lights come on/off.
The recall remedy only temporarily corrected the problem , recall number 96v099000. The brake actuator malfunctioned whichwas not covered in the recall extended warranty.please give any further details.
Experiencing extended stopping distance.tt
Consumer experienced brake failure, running through a stop sign, dealer informed that the entire brake system needed to be replaced.
Recall # 96v-099000; after arriving at dealership for appointment, owner was told that the tool needed to perform recall work was not available and would be ordered.
While owner was driving the brake light came on (abs brakes) and the next day checked the brake fluid and a few minutes later brakes went out. Car was totalled.
It appears power brakes and engine is turned off during brake application.tt
While drivingconsumer would step on the brakes, and they would make a loud grindingnoise, like metal to metal. Consumer was concerned.
While driving steering rack and pinion bracket broke, front safety frame broke off, frame has huge crack, resulting in loss of control. Also, replaced fron brake rotors/pads.
While driving steering rack and pinion bracket broke, front safety frame broke off, frame has huge crack, resulting in loss of control. Also, replaced fron brake rotors/pads.
Abs system was loud, brake pedal would stick, and liners started to smoke .tt
On three occasions w/abs and master cylinder, brakes had total failure.brakes have failed right after being repaired the next day. Please describe details.
Vehicle's brake pedal does not release properly,causing the brake light to stay on and run the battery down.
After having complete brake service by independent car repair shop, then continuing to experience poor braking, took to dealer listed. Diagnostics showed "no problem" and tech drove and said brakes were fine.we continue to have poor braking to point that pedal in depressed to stop yet van keeps rolling(and abs does not activate). Worse when van is loaded or pulling the boat. Frightening to not be able to quickly stop as was the case previously and certainly not like any of our other vehicles. There has been an abs recall on our model and i suspect something is wrong and the dealer evidently doesn't have the ability to detect it. I believe this to be a major safety issue that needs another evaluation from someone with more expertise before an accident occurs.
After having complete brake service by independent car repair shop, then continuing to experience poor braking, took to dealer listed. Diagnostics showed "no problem" and tech drove and said brakes were fine.we continue to have poor braking to point that pedal in depressed to stop yet van keeps rolling(and abs does not activate). Worse when van is loaded or pulling the boat. Frightening to not be able to quickly stop as was the case previously and certainly not like any of our other vehicles. There has been an abs recall on our model and i suspect something is wrong and the dealer evidently doesn't have the ability to detect it. I believe this to be a major safety issue that needs another evaluation from someone with more expertise before an accident occurs.
Abs systes pump motor failure, causing loss of braking ability, also abs warning light came on.tt
The contact owns a 1993 chrysler town and country. The contact received notification of nhtsa campaign number: 00v305000 (steering); however, the part needed to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Ma 08/13/15
Moaning noise coming from the power steering system.in march 08 i took my 1993 town and county mini van in and my mechanic replaced the steering rack.this seemed to work until the moaning sound started again in october 08.after keeping the van for four days my mechanic could not find anything wrong and did not hear the noise.i picked it up and it was quiet until march 09.at this time i brought it back and the power steering pump was replaced.after only one week i am again hearing the moan start.my vehicle had 47,000 miles on it when this problem occurred and now has 55,700 miles.
While driving in the rain engine pulley released the belts when gotten wet. Then steering wheel lock ed, and engine won't work without a prior warning.
Due to a design flawweldon steering wheel broke loose, causingsteering wheel to come off while driving, which could have caused a crash.please provide further information.
The power steering belt simply slipped off. I am lucky not to have been on the expressway. I pulled the car to a safe area, but strained my neck in the process. I have now learned that chrysler has updated this steering belt system with a product that bolts the belt to the front pulley acting as a guide rail.which other cars have?i would like to find out if this is an official recall and this is why i'm communicating with you.i hope you can help me find out. This situation is very dangerous if not updated/fixed with the newguide rail parts. Thank you! please e-mail me with whatever you can tell me!dt
The power steering belt fractured. Please describe.tt
While driving out of parking lot area, could not turn steering wheel. Had no control of vehicle at time. Had vehicle towed to dealer. Was informed drive tensioner had broken.
After driven and parked and re-entry to leave steering system failed due to tensioner breaking. Please describe details.tt
Front end swings on the highway when driving approximately 65mph. Dealer contacted, states they should last longer, and cannot duplicate the problem.if the tie rod is broken the vehicle's steering will be lost.
Rack and pinion replaced (3) times. Please describe details.
While driving steering rack and pinion bracket broke, front safety frame broke off, frame has huge crack, resulting in loss of control. Also, replaced fron brake rotors/pads.
When driving at any speed there is a knocking noise coming from under the vehicle.
The selling dealer was approached twice about the door misalignment. They stated we could have the door trim stripes and mouldings aligned or the closing problem fixed, not both. They stated that they had seen this problem before. They did not want know the cause. Associated with this problem are dimple dents in the area, just above the outside door handle. The spot welds securing the door hinges to the door frame assembly have failed. The skin of the door slides before and after as the door is closed and shakes when the vehicle is in transit. The dimple dents are a diagnostic of this failure. There are thousands of these 93, 94 and 95 chrysler /dodge and plymouth minivans on the road with the dents. For a long while i believed that they had all been unlucky in the parking lot. Having seen the hinges floating free and the door skin moving before and after against the spot welds of the trailing edge of the door, i now know the dents are from the failed door hinges. Jerry's collision center in springfield va says they have seen many of these failures. Shop repair cannot be guaranteed, and they suggest replacement of the door. This shop is very competent. They do the body work for the white house cars.
The welds have failed on both doors.the passenger door is sagging and must be slammed to shut it.
Door hinges on front passenger's side needs to be continuously welded. Please provide more information.
Rear hatchback window exploded while vehicle was parked inside garage.
Recall repair scheduled (99v-213) however dealership did not complete work.*mjs
While shuttinghatchsupport arm broke, swinging up and breaking the cargo window. Dealer has not been contacted.
A few months ago the consumer received a recall notice# 99v213000 subject:lift support bracket.the vehicle was taken to the dealer for repair.during the repair, the owner noticed a crack where the lift connected to the gate.the mechanic said it had nothing to do with the recall.recently, the liftgate was opened. It separated and fell on the owner.the owner requested a call back.*scc
No parts available for liftgate. Nhtsa recall #95i00100. Please describe details.
Liftgate support arm came loose, andliftgate slammed shut, andglass shattered. Glass flew about 15 feet, consumerfelt this was very dangerous because children were present, and consumer was cut.
Arms that hold liftgate came apart and liftgate slammed shut, and glass shattered everywhere.
Rear liftgate support failure damaged internally.dealer said no recall. This is safety hazarous because children were present.dt
Recall 99v21300 repairs done on liftgate support, butliftgate support broke again.
Abs brakes failed and van would not stop.a on going problem that started in 1995 and still continues to the present 2003.dealership has had vechicle to repair problem everyyear until 2000.my abs bake light still comes on and i have had 10-ten complete brake jobs done to my van.the dealership has had my van for almost 2 years for repair and we could not use it.i need help brakes are failing again and just after 5000 miles.i can not get anyone to take my van in on trade for another vechicle.i need help so no one will be seriously injured.we have had to many near misses with the brakes failing.thank you robert phelps.
Front end swings on the highway when driving approximately 65mph. Dealer contacted, states they should last longer, and cannot duplicate the problem.if the tie rod is broken the vehicle's steering will be lost.
Front end misaligned, shimmied due to front tires being out of balance.
I had right front wipers repaired by a repair shop (r&r wiper transmission and wiper link and bushings) at a cost to me of $162.56. Marong repaired wiring at dual function pressure switch and replaced switch in order to correct my abs problem; and they charged me $200 deductible.marong also replaced my front axle ($171.73)to correct a problem i had since i owned the van.
I need my van running will . My kids and myself travel alot so i can't afford to have an accident due to a recall mulfunction on my vehicle.
Throttle cable froze due to itslocation near engine, and touching the hot engine.in addition, wires overheated, resulting in a fire. Rear abs brakes/overheated engine and radiatorwere replaced also.
Throttle cable froze in open position, causing vehicle to accelerate./loss of control.also,front/rearabs brakes failed prior to/after recall repairs.in addition, engine overheated, causing radiator to fail and wiring to burn.
Back windshield exploded while driving; shattered completely; glass fragments flew inside vehicle; no apparent reason; no nicks in glass; speed 35 mph.tt
Rear hatchback window exploded while vehicle was parked inside garage.
In snowy conditions andwhile driving at 32 mph rear windshield on liftgate exploded without any cause.rear defroster was on at the time.
Drivers side rear middle window exploded inward into car. 2 children where covered in glass for no reason.tt
I had right front wipers repaired by a repair shop (r&r wiper transmission and wiper link and bushings) at a cost to me of $162.56. Marong repaired wiring at dual function pressure switch and replaced switch in order to correct my abs problem; and they charged me $200 deductible.marong also replaced my front axle ($171.73)to correct a problem i had since i owned the van.
When the windshield wipers are turned on they will start, and while driving the wipers will stop working.. There is an investigation on the windshield wipers, ea-97. 022.
Wiper blades shut down while driving.*la recall#99v189000 the consumer requested reimbursement for the replacement.*sc
When traveling in inclement weatherwindshield wipers are needed. The shaft disengaged from the wipers, causing poor driver visibility. Also, recall99v189000 concernswindshield wiper motr failure.however, thisvehicle was not included due to vin. Consumer has contacted the manufacture.
Windshield wipers malfucntioned, causing visual difficulty andcould result in a crash.there is recall 99v189000 concerning windshield wiper motor failure. However,this vehicle is not included in the recall due to vin although it has the same problem.
Recall 93v09800/ mfr 575.when driving wheel sheared off and bolt broke off the wheel. Manufacturer and dealer contacted and cannot remedy the problem. Problem continues toexist. Provide further information.
15 inch wheel has a deformed lug: nut seat configurationwhich causes poor nut to wheel contact. Vehicle not included in recall number 93v098000.while driving bad vibration, consumer got off the freeway and the right front wheel broke off the hub, after putting in new wheel bolts they loosened again but did not break off, larger bolts installed and they are working fine, consumer feels that is may be a possibility that the spare tire that was on for a while which is steelk was not seating properly started the problem with the wheel bolts.*mjs
Read more
