We found the following complaints for CHEVROLET CAMARO (1986)
Read complaints for CHEVROLET CAMARO (1986)
Horn failed.*skd
Intermittent stalling.
While driving the vehicle caught on fire in the engine compartment.cause was not determined by fire department. Please provide details.
Design of emergency brake system fails to allow brakes to adjust to meet safety standards for new jersey state inspection.*skd
Driver's side automatic seat belt plasticcover doesn't contain an ultra violet stabilizer, and exposure to the sunlight can weaken the plastic, andseatbeltwill release automatically.
Replacement driver side seat belt does not release smoothly, passenger sidebelt plastic attachment molding come undone, passenger belt have not been replaced.
Owner states that she has problems with one front and rear safety belt, and that there was a recall for the seat belts. Owner also noted that her belts broke,but her vehicle was not indentfied as an affected model.
The driver seat belt had problems latching and the passenger seat belt had problems releasing once it was locked.both seat belts in the rear failed to latch properly.
Seatbelt failure.
Seat belts failed prior to recall notice.
The driver side seatbelt willnot engage at all,the top part of the seatbelt buckle is inoperative.the dealership is aware of the problem.
Plastic cover on front driver and passenger seat belt buckle broke.tt
The passenger front seatbelt is not latching and if it is latched it will not unlatch. Please describe.tt
The contact owns a 1986 chevrolet camaro which was purchased in 1992. She received a recall letter in 1994 regarding the seat belts (nhtsa campaign id number: 90v105000: seat belt buckle assembly) but did not have the recall repair performed on the vehicle at that time. While utilizing the driver's side seat belt, the locking mechanism became disengaged from the seat belt housing. The manufacturer was contacted and stated that there were no recalls listed under her vin and the recall repairs were already performed on the vehicle. The contact stated that she never had the repairs made to the seat belt mechanism. No repairs were made to the vehicle when the complaint was filed. The failure and current mileages were 99,960.updated 5/6/10 updated 06/18/10.
The casing where the seat belt is secured/locked broke prior to/after recall repairs. Manufacturer said that there is a warranty on recall, and that this warranty had expired. (90v-105).
Right front seat belt fails to latch properly.
The front driver and passenger side seat belt buckle seat belt will not latch .tt
Both front seat belts once fastened could not be unfastened, causing the occupant to be trapped, and on occasion they tend to pop open.tt
A recall notice concerning seat belt buckle failure was sent to consumer and the car was not taken in right away. Once consumer took the car car into be repaired, the dealer refused to fix the problem.
Passenger side plastic part that goes down inside buckle is broken.tt
Recall 90v105;the seat belt buckle recallhas not been modified since 1994.the driver's and passenger's seat belt buckles are broken due to defect in the recall, but dealer claims that they have no information on the recall.
Seatbelt buckle jammed, will no longer latch seatbelt.
Consumer stated upon connecting seat belt latch, it will not stay connected, passenger and driver seat belt does not work at all, recall number 90v105000. The manufacturer refused to fix the defective seat belt that was on recall, also the cruise control malfunctions.
The seat belt buckle on the front passenger side when consumer buckles up remains locked and she couldn't it get loose.tt
Seat belt buckles inoperative. *sd
Seat belt buckle broken.
Seat belt latch/buckle. *cj
Dealer is charging consumer for replacing the seat belt because the release button broke and they claimed that it was not part of the recall. Consumer thinks that the dealer should pay or replace the seat because he feels like this is a safety defect.
Everything in the system has been replaced and adjusted to factory specs.replaced master cylinder, porportioning valve, rear calipers and pads, front pads, bled lines, adjusted rears to factory specs. The rear wheels will not stop the dynamometer drum for an emission test.reported to chevrolet, c00382938, unable to help.
Everything in the system has been replaced and adjusted to factory specs.replaced master cylinder, porportioning valve, rear calipers and pads, front pads, bled lines, adjusted rears to factory specs. The rear wheels will not stop the dynamometer drum for an emission test.reported to chevrolet, c00382938, unable to help.
Everything in the system has been replaced and adjusted to factory specs.replaced master cylinder, porportioning valve, rear calipers and pads, front pads, bled lines, adjusted rears to factory specs. The rear wheels will not stop the dynamometer drum for an emission test.reported to chevrolet, c00382938, unable to help.
Everything in the system has been replaced and adjusted to factory specs.replaced master cylinder, porportioning valve, rear calipers and pads, front pads, bled lines, adjusted rears to factory specs. The rear wheels will not stop the dynamometer drum for an emission test.reported to chevrolet, c00382938, unable to help.
Steering wheel tilt fell apart while driving.tt
Bolt nut loose on the tilt steering wheel causing the ignition to shut off while turning the steering wheel resulting in no power steering/power brakes.nlm
Hood and hatch dampers were not holding up the hood or hatch in the up position, consumer replaced.
Hood and hatch dampers were not holding up the hood or hatch in the up position, consumer replaced.
Consumer stated upon connecting seat belt latch, it will not stay connected, passenger and driver seat belt does not work at all, recall number 90v105000. The manufacturer refused to fix the defective seat belt that was on recall, also the cruise control malfunctions.
Consumer was driving and car accelerate causing consumer to get a ticket .tt
Read more
