We found the following complaints for EVENFLO 207 (ON MY WAY) (Unknown)
Read complaints for EVENFLO 207 (ON MY WAY) (Unknown)
Evenflo model # 207-117, dom 02-06-96 css is included under recall # 98e003. Consumer hascontacted the manufacturer in march 98and has not receivedrepair kit.
Evenflomodel # 20, domjun. 96.owner contacted manufacturer in apr. Of 98 and has not received repair kit.
Evenflomodel #207, dom 7/24/96; consumer contacted manufacturer april 16, 1998. As of 06-aug, 1998, repair kit has not been received.owner has contacted the manufacturer.
Evenflo model # 402; whenputting the hook into the buckle latch it clicks, but does not connect.owner tried to contacting the manufactuerer .
Evenflo model # 207163p1, dom 07-dec-1998; plastic piece inside of canapy is exposed & child is able to pull canapy backwards/forwards. This causes canapy to be detached & child places it in mouth.
The shoulder harness is not correctly pulled tight against the harness slot on the back of the child seat.it catches on a thick, sewn-in loop of webbing, which could allow as much as two inches of slack when subjected to crash forces.
The canopy on the child safety seat came unraffled and and wrapped around the child's neck. Manufacturer has not see vehicle.
Evenflo on my way model # 4951, dom 01-05-2000;infant 4 months oldarm was broken in a car accident.css was installed correctly.vehicle was struck on driver's side & the infant's upperarm was broken.
Ater 5 1/2 months the car seat broke, a small piece of plastic fell out of the back where the seat tighten the 5 point harness strap, within day the whole clamp that holds the harness strap snapped off, exposing a sharp screw, the harness on the seat can not be tighted, evenflo told me to borrow a seat or use a friends seat until they mail me the part
My 7 month old infant pulled the infant carseat cover away while strapped in the seat and traveling.he then was able to pull at the polyester backing and put it in his mouth resulting in choking.fortunately an older child was seated near him and removed the peices from his mouth.
Evenflo model # 207, dom 01/31/96; csswasrecalled under recall number 98e- 003.contatced evenflo in march of 98 for the repair kit and has not received it.
Consumer has a 15 lb. 4oz, 26" tall son. The carseat base and the carrier do not align properly, causing it is not to be secure when her son sits in it.*et
Consumer contactedthe evenflo manufacturer in march to receive repair kit to remedy recall probelm. Consumer has not received parts or reply from the evenflo company. Recall #98e003000.
Css in included under recall # 98e003.contacted the dealer for replacement part .as of today part has not been received.
Evenflomodel # 20, dom 5/28/98;comsumer contacted manufacturer april 16, 1998.as of 06-augrepair kit has not been received.manufacturer contacted in july.
Manufacturer failed to comploy with safety recall.
Disappointed in its structural design and lack of easy handling, details in report.
The child safety seat became stuck in the base.consumer had to rock the seat back and forth before the seat let lose.
The child safety seat contains a knob for adjusting the seat and the gauge on the side to let you know when the seat is at a proper angle, the gauge was dramatically off and registered wrong which could have resulted in injury to child. *mjs
Evenflo model # 2071c5p1, dom 01-18-1999; vehicle was involved ina serious accident when the rear facing css detached from the base. Driver found 8-month old infant still strapped in css facing down.
Evenflo model # 2071a3p2, dom 03/25/98; while carrying the css the handle releases from the locked position.also,the base of the seat released without manual operation while the css was being carried.please provide any further details.
Evenflo on my way model # 207293p1, dom 01-oct-96, seat is easily removed from base by tugging upward near the front of child's seat.
Consumer was driving with evenflo child seat installed invehicle.when hitting a pot hole in road surface base of child seat flipped up,forcingbaby face intoback ofback seat.consumer has yet to contact manufacturer.please provide the model number and date the seat was manufactured.
My wife was involved in a head on collision.she and my two children were choppered to a trauma unit.my 10 week old son was in the evenflo on my way system and the base broke apart upon impact.the system held him in place, but my concern is with the base breaking apart. Model#4921b7p2 manufactured 14 jan98.
Upon impact the child seat separated from its base without warning. As a result, the seat flipped over onto the child.no injuries reported.
Evenflo model # 2071l3p1, dom 01-aug-1999 27 aug 99: 1. It is very hard and difficultto release css from base;2. Consumer went to grab handle with infant inside, and handle released, jumped out of position, causing infant to fall out. Infantrushed to hospital, later released with no injuries.
While driving 35 mph the vehicle was involved in a head on collision. Upon impact the child safety seat separated from the base.
Evenflo model # 207106p2, dom 10-31-97 , two front hooks on base will not release the css carrier, causing a safety hazard.
Defect of alignment post on child seat base.*mrthe consumer was sent a repair kit for the known defect and carefully followed the simple directions, but now the seat does not release from the base without using a great amount of force.*scc
Evenflo model # 4841025p1, dom 1/10/00; while pushing the stroller up over a curb, car seat separated from the stroller, throwing the baby and car seat to the ground.manufacturer will be notified about the car seat. Please provide any further information.
Evenflo model # 3861364p1, dom 01/09/2003; consumer called complaining aboutchild seat baseproblems.
Seat and base were perfectly installed in car it had been done with deborah baer cps instructor #0017.we noted that often locking the seat (the carrier) into the base, we were able to put our hand under the carrier behind the baby's head and lift the carrier out of the base without unlocking the seat with the red release handle.we took the system back to mrs. Baer and she also could lift the back of the seat out of the base with very little force.
Dt: evenflo onmy way model 48431025p2, dom 02/18/2000. The contact stated that car seat failed this weekend.the seat would not unlatch from the base. The contactwas trying to remove the seat into a different vehicle, and the latch would not disengage from its base.thecontactcontacted evenflo, and they said that they would take her safety concern into consideration, and not to use the car seat again. They did not offer any free remedy or replacement seat.
Evenflo model # 207, dom 02/27/97;the seat will not detatch from the base.manufacturer will be noti fied.
Evenflo model # 207, dom 09/10/96; while carrying the car seat, the handle unlatched, causing the seat to flip over with baby inside of the seat.
Ea97-006, the carrying handle becomes unlatched when carrying the handle.it doesn't stay in the locked position.
Consumer not satisfied with the method manufacturer has taken to remedy the faulty carrying handle (repair kit).
While carrying child seat by handle carrier seat would flip over without indication..et.
Evenflo model % 2071a6p2, dom 09/18/97: while carrying the seat by the carrying handle, the handle unlatched and the seat flipped forward. The baby was not injured.
Evenflo model # 227013, dom 07-01-98; while carrying the seat by the handle the handle released from the locked position, causing the seat to flip forward. Please give any further details.
Consumer states that the handle that allows the seat to be moved foward and back wards on the carry broke off when trying to install the car seat into the base of the seat.
Evenflo model # 207, dom 11/17/95; while using the seat as a carrier the haldle slipped, causing the seat to rotate the child.the child was not injured.the manufacturer has been notified.
Evenflo model 207, domaug-17-199;, carrying handleunlatched by itself while infant was in seat, causing infant to fall,resulting in injuries.
Carrier handle released with infant in seat resulting in the child falling face down on the floor.
Evenflo model # 2071a6p1, dom 07/31/97; while carrying the css the handle released, causing the seat to flip forward. This seat was not included in recall number, 98e00300. Please give any further details.
Consumer was not satisfied with the remedy for the recall of the infant car seat.
We were given an evenflo car seat for a past child that we never used. We recently had a newborn and decided to use it as our other one was used heavily. My husband picked up our son while in the seat on tuesday may 8, 2007. The handle was up but unexpectedly became unsecured ,which resulted in our 1 week old child being jarred forward. Yesterday i saw on the news that there were some evenflo car seats on recall for the sameproblem.i did not see the recall for our model beginning with 495.wasthere one?
Cosco model # 2071a6p1, dom 012/o4/97; when the seat is being carried the handle releases from theposition,causing the seat to flip forward.please give any further details.
The contact owns an evenflo rearfacing infant seat, model 2580191 or 2580336 (na).the seat was manufactured on may 1, 2008.while carrying the seat, the handle collapsed and the baby fell out of the seat.the baby was taken to the doctor for bruises.on occasion, the handle locks and the contact cannot remove her child from the infant seat.the purchase date was unknown.
Evenflo model # 2821163, dom 03/12/2001; lock for seat belt broke off. Please add additional information.
Ea-97006;evenflo model 20760p1, dom 04/28/97, while resting the child seat on hip, the handle released and flipped forward over the plastic grooves that the seat belts go through, and caused the baby to hang upside down in the seat. Consumer will contact evenflo.
Carrier handle did not latch/lock completely and the seat flipped forward while baby was strapped in it.
Evenflo model # 3 207213x1 9/95;went to pick up the child in the css and the carrying handle went back and the seat flipped forward.no injuries to the child.
Evenflo model # 207105p2, 11/12/97; when carrying the seat by the carrying handle, the handle snapped and the baby flipped out onto the cement.not able to reach manufacturer. Telephone number constantly busy.
98 e 003 000/handle slippage:evenflomodel# 211, domsept- 23- 00: carrying handle unexpectedly unlatched causing the baby to fall, injury undertermined at this time. Manufacturer was not notified at this time.feel free to provide any further details on this matter.
Consumer contacted the manufacturer in may to receive the repair kit for the handle of the seat, but still hasn't received the kit for the recall.recall #98e003000.
Consumers states thatchild seat handle broke off.
When the seat was being taken out of the vehicle the body weight of the child flipped the seat backwards(child weight 8 pounds and was only 2 weeks old) which caused the baby to hit the ground. There were no serious injuries.
Evenflo model # 4921b7p1, dom 09/05/97; while carrying the seat by the carrying handle inhome, the handle released by itself and the seat tumbled forward, throwing the baby out of the seat onto the floor. The baby is being observed for 24 hours for any injuries.the manufacturer will be contacted.
Evenflo model # 2071f3p2, dom april 28, 1998; car seat handle moves unexpectedly and very loosely which may cause the css to flip over.if the child is not strapped in,child may fall out.please provide further information.
Handle locking mechanismdoes not stay in a locked position, allowing the seat to rotate withchild in the seat.
Evenflo model # 207, dom 30-dec-1998; while walking child in the seat carrying unexpectedly unlatched, causing baby to fall out andsustain minor bruises. Manufacturer contacted.
Evenflo models # 2071c5p1 and 2071c5p2, dom 04-may-98 & 20-oct-98;while carrying css by carrying handle it released & css fell forward with child in it. When one of the twins fell to the concrete face down. Was taken to hospital. Had some scrapes & bruises.
Evenflo model # 492157p1,dommar.15. 1996 locking mechanism released while carrying child, child was not injured.
Evenflo model # 4951l2p2, dom 05/27/98;handle does not lock in position. Handle releases when carrying the seat by the handle. Please give any further details.
Evenflo on my way model # 207, domapr 24-00: carrying handlehas suddenly and unexpectedly unlatched fromred push button assembly, which causedchild to roll over.child was straped in, andsustained no injury. Manufacturer notified, and sent a repair kit.repair kit was installed, andproblem has reoccurred.manufacturer was notified again, andreplacedseat.feel free to provide any further details on this matter.
Evenflo model # 2071l3p2, dom june 25, 1995; while carrying the css carrying handle unlatched, causing the css to rotate forward, resulting ininjuries to the child.there is a recall for the early date, but this css is not included in the recall although it has the same problem.
Evenflo mdel # 492, dom 02/01/97, while carrying the car seat both sides of handle latching mechanism broke, causing seat to fall.
Evenflo model # 4921a5p1, dom 07/22/97; while carrying the css the carrying handlereleases on its own. This is the second seat that has done this.consumer is will contact the manufacturer.
Handle locking mechanism failed resulting in the carrier flipping over with infant inside,prior to recall notice.
The child seat carrying handlegives way and seat flips forward. The incident occurred two times. The manufacturer was contacted, and stated that the item was not included in the recall. But the problem is identical to the same model that is listed as recall. The manufacturering date of the consumer's child seat is one month after the last date of the manufacturer's that is listed in the recall report for child safety seats.
Evenflomodel 207175p2 dom july 31, 1997, while carryingseat by the handle,handle moves forward unexpectedly, causes child to move back. If the child is not strapped inthe seat,child may fall out and sustain injuries.will be contacting manufacturer.please provide further information.
Evenflo model # 2071a3p2, dom 03/25/98; while carrying the css the handle releases from the locked position.also,the base of the seat released without manual operation while the css was being carried.please provide any further details.
Consumer claims that carrying handle of child safety seat is making a popping sound when it should already be locked in place.please provide any additional information.
While attempting to carry child in infant seat.the handle slipped from the lock position.the child and seat fell to the ground.child was not injured but frightened by the fall.
While carrying the seatlocking mechanism snapped loose,causing the seat to rotate with the child inside of it.
Evenflo on my way model #42,domjan 23, 98:carrying handle collapsed while the child was in the seat, this caused the child to fall out,and sustainhead bruises. Other then that the child was ok. Reporting this to nhtsa and seeking additional information.
Evenflo model # 4921b7p2, dom march 18 1997;while carrying the handle of the css, the defective handle moved out of position, throwing the baby out of the css and caused injuries.
The handle on the child safety seat is loose, allowing the seat to be rotated when carrying it by the handle. Manufacturer has not been notified.
Css was in volved in recall 98e003. After repairing the css , carrying theseat by the handle,the handle slipped, causing the seat to rotate.the child was not injured.
Evenflo model# 200, dom25 may 99: handle locks have suddenly and unexpectedly unlatched while carryinga 5 1/2 day old baby, thiscausedseat to flip over, andbaby received severe head injuries.manufacturerwas not notified at this time.please feel free to provide any further details on this matter.
Had child in carrier & taking it from waiting area to table in restaurant; the carrying handle became unlocked & seat flipped over. Child was strapped in & not hurt.
Evenflo child seat model # 206, dom 3/24/95.carrying handle suddenlyand unexpectedly unatched whilecarrying the seat by the handle.
Evenflo model # 207213p2, dom26-oct-95; left handle mechianism has cracked causing failure. This could allow the child to flip forward and cause injury. This seat is not included under recall, but has same defeect.
Evenflo model # 2071ap2, dom 04/02/97; recall # 98e003000 evenflo/handle slippage. Owner has not received recall kit ordered 8 weeks ago. Confirmation # a8140497.
Carrying handledoes not hold in a locked position, even with the repair kit that was obtainedfrom the recall. *ml
Handle plunger replacement recieved, however one spring was missing from the parts list.
Consumer states he was carrying his child when all of a suddenwhen he pulled the seat from the car and the handle collapsed, andthe whole thing almost fell to the ground. Mr
Evenflo model # 4921b7p2, dom 12/12/97; while consumer was carrying the child safety seat by the handle, the handle released causing the child seat to tip forward. The baby was not injuried. The manufacturer will be contacted.
Recalls 95e-024000 and 984-003000, evenflo on my way models 207 and 492 child safety seats, dom 12/15/95 and 07/27/97; carrying handles on affected seats can suddenly and unexpectedly unlatch when used as a carrier.
Had placed child in css & locked child in; went to pick css up by handle; the handle came unlatched/unhooked from css frame. It flipped over & out of owner's hand; child fell on its face.taking child to doctor's.
Evenflo model # 4921c1p2, dom 03/25/97; recall # 98e003000/evenflo/handle slippage; owner did not experience any problems with child seat until after the recall kit was installed. After installing the kit, the handle released by itself on more than one occasion.
Evenflo model # 207274t2, dom 06/05/97; recall # 98e003000;owner has not received recall kit ordered 5 weeks ago. Confirmation # 35438530, was told that kit would be sent in 2 weeks.
Recall notice arrived for child seat (#98e003000). Called manufacturer & left information. As of this date, repair kit has not been sent. Had called several times since receiving the notice.
Evenflo model 207104p1, dom march 15,1999; carrying handle will jump out of position, causing seat to rotate backwards, resulting in injuries.
Car seat handle unsnaps and baby falls forward. Please provide additional information.
Recall # 98e003000; evenflomodel # 207182p1, dom 04/02/96, /handle slippage. Owner has not received repair kit. Kit was ordered over 2 months ago.not able to give confirmation number.
Evenflo model # 492171p1, dom 19-jun-1q997; child seat was recalled 98v003000. Received remedy which failed to keep carrying handle from flipping child seat.
Carrying handle collapsed while carrying child,causing child to sustain bruises on top of head. Can nhtsa help in this matter.
Evenflo model # 207, dom 05/01/98; handle on the css does not remain in the locked positionwhich could cause the css to flip forward or backward.please give any further details.
Evenflo model # 207213p2 css handle released ,and the handle flipped under the seat. This resulted in the child falling to the ground.
Evenflo model # 492171p1, dom 08/21/96; recall # 98e003000 evenflo/handle slippage. Owner has not received repair kit. The kit was ordered from the manufacturer in march of 1998.
Consumer states thatchild safety seat handle keeps on falling off car seat.(make and model not specified.
Put the child in the child seat and the handle gave way.the child seat flipped forward.the incident happened two times. She contacted the manufacturer, and was informed that the child seat was not on recall, the consumer found recall information concerning a child seat with the same model number. The manufacturing date was one month before the dateon her child seat, which made her child seat not eligible for a recall.
Consumer states while carrying the child safety seat, the handle broke and baby fell out. Manufacturer notified. Please provide additional information. *ph
Evenflo model # 203; when picking up the css by the carrying handle the locking mechanism will become unlocked and the seat will flip forward and at times backwards.
Handle mechanism failed resulting in child falling down stairs, child suffered head injuries. (attorney for consumer).
Evenflo model #2052a7p2, dom7-9-97; carrying the child in theseat by the carrying handle and the carrying handle lock mechanism unlatched, and the carrying handle went forward and the seat went backwards.there was someone behind it the seat to catch it. The child is 13 pounds.
While carrying thechild seatthe handle snapped off, causing the child to fall down to the ground.
Evenflo model # 207, dom 05/01/98; handle on the css releases from locked positionwhich could cause the seat to flip forward.please give any further details.
Evenflo model # 207, dom 04/23/97; css was included under recall 98e003. Consumer has contactedmanufactureron march 98, and has not received repair kit.
Evenflo model # 206117p1, dom 12/16/94; when lifting the car seat by the handle in the locked position , the handle released and the child safety seat flipped forward. The infant was not injured.the manufacturer has not been contacted.
Called manufacturer for the repair kits (#98e003000), seat carrying handle.it has been several months since that call. There have been no information or repair kit sent. Will be expecting triplets soon & need the kits for the seats.
Seat rotated with child in it while carrying it by the handle due to a faulty locking mechanism in the handle.
Evenflo model # 2071l3p1, dom 01-aug-1999 27 aug 99: 1. It is very hard and difficultto release css from base;2. Consumer went to grab handle with infant inside, and handle released, jumped out of position, causing infant to fall out. Infantrushed to hospital, later released with no injuries.
Evenflo models 207 and 492, dom 12/15/95; the handle on the car seat can suddenly and unexpectedly unlatch when used as a carrier.
Evenflomodel492,. Dom.01-19-98;the harness buckle will not latch properly.owner will contact the manufacturer.
Consumer had 3- onth old childthat weighed 13 pounds, was buckled in a car seat. Car seat fell down some stairs.when consumer went to pick up car seat noticed that buckle had popped out/disengaged, but the release lock was still in lock position. This defect caused the infant's upper body to hit floor.
Evenflo model 3207213p1 domsept 12, 1996;the css buckle unlatches unexpectedly which wont protect the child in event of an accident.
Evenflo model # 20, dom dec 16 1998: css safety harness latchmalfunctioned, will not latch properly. Manufacturernotified.
Evenflo model #492, dom apr 9, 96; harness does not lock in properly into buckle assembly,causing the buckle to come out . Evenflo will send new seat.
Buckle on the harness/straps will not click or go into the correct receiver. Sometimes after buckling the harness , it comes loose.
Evenflo model #207104p1, dom 07/21/97;while riding with the car seat in the vehicle. The harness strap unlatched by itself.whentrying to re-latch the strap it would not latch.owner will contact manufacturer.
Evenflo model # 492171p1 dom 6/21/97;the restraint buckle will not latch. Manufacturer will be notified.
Evenflo model # 207, dom 06/23/97; css harness fails to lock properly, causing the strap to choke the baby.
Evenflo model # 207104p1, manufactured in 15-oct-98. The red button on buckle will not release. The consumer must wiggle the belt in order to release the child.
Evenflo model #207106p1, dom may, 2 1997; consumer was in rollover accident when infant carrier buckle unsnapped, causing the child to hang from locking clip that holds harness straps together.
Evenflo model # 2071c5p2, dom 09-02-98; locking mechanism between the crotch area will not latch. When it's finally locked, it's very hard to unlock to release child in css.
Css model # 492157p2,mfr date aug 7 1996,while driving at 60 mph the vehicle experienced rear end collision in which the defective css seatbelt buckle unlatched,throwing the child into the cargo areawhich caused serious injuries
Harness buckle sticks and will not release child from the seat.
Evenflo model 207,213p1-on my way, date mfr. Oct.11,1995, the harness strap buckle will come unattachedwhen in use.
The buckle became unlatched allowing the child to slide down in the seat and get neck caught up against the chest clip.nlm
The child safety seat is not fastening properly, the consumer would pull the buckle out and wouldn't have to press the red release because it just popped out.
The latch that comes down over the head won't stay latched. Evenflo wants to take it back.
Evenflo model 207104p2, dom nov. 99; buckle housing does not buckle, which won't protect the child in event of a crash.please provide further information.
Evenflo model # 207117p1, dom 09/01/95; sometimes the buckle does not latch.when the buckle does latch if the baby moves around, the buckle comes unlatched.when contacting evenflo the line is always busy.
The buckle that goes in to latch does not operate properly, does not catch. Manufacturer not aware of the problem, problem still exists. Provide further information.
Retainer clip onharness strap can come undone by a five month old child. Has not contacted manufacturer.
Evenflo on my way model #207, domapr 24-2000;manufacturer'sreplacement seat has experienced a problem withretainer clip not securing properly. Manufacturer was notified.please feel free to provide any further details on this matter.
Evenflo model # 2113p1, dom aug-17, 2000; clip adjuster in back of seat forstrap is broken.seat can no longer be used.
Retainer clip is easily moved by four month old child resulting in the infant being able to stick her arms between the straps.
Evenflo model # 2275013, 01-apr-2000; clips that holdharness straps in place broke off whileconsumer was puttingchild intocar seat.
The clip on one side of the car seat broke. The clip is what the seat belt weaved into at the back of the car seat. The actual part that loosened and tightened the set belt broke away from the back of the car seat. The manufacturer replaced the car seat.
Evenflo model#200, dommar 24-00:four month child is able to move retainer clip and slide out of harness strap. Manufacturer notified, and informed consumer to take the retainer clip off, and put it back on up side down. Please feel free to provide any further details.
The piece that is used to tighten and hold the seatbelt secure on the back of the seat broke.nlm
Tension clip broke off the child seat.
Ccosco on my way model # 207, dom 09/22/98;css harness strap retainerclip failed to lock properly. Also, when consumer locked the retainer clip and jerked on it it would still come apart, causing the child to fall out of css. Mfr. Was not contacted at this time .
Evenflo model # 492171p1, dom 10-jun-1997; while driving with one child in rear facing seat, and other child besides it, child in rear facing child seat managed to unlock harness clip.
Evenflo model # 70256014, the harness latch broke. Consumer is unable to fasten the child into the seat. The manufacture will be contacted.
Foam cushion on the evenflo my way model # 4921c1p2, dom 07/17/97 is prematurely wearing out.is not providing enough comfort or support because the child's back and bottom ison the plastic , cause unknown. .please give any further details.
Evenflo on my way model # 207, dom 24-apr-1996;mom complained that the warning label, attached to the cover of child safety seat, burned the back of child's head.asking nhtsa look into this matter.
Metal buckle is not flush with the back of the seat because it's caught on stitching.nlm
Evenflo model # 207117s1, dom 25-feb-1997;placed an 8-month old child in child seat. Child would put fingers under cloth padding, pull out the foam & put it into mouth. Once nearly choked on foam. Seams on padding, cover not adequate.
Metal buckle hanging 2-3 inches in back of seat is caught in stiching.nlm
Evenflo model #2075013p1, dom dec. 17, 1999, while drivingvehicle had a crash.child's seat padding was not sufficient forchild's head which caused a fractured skull. Please provide further infomation.
Evenflo model no.492-106p1,1996, cloth cover does not fit well,child was able to pull stuffing from seat, causing child to choke. Consumer is very concerned for childs seat. Evenflo has been notified of problem.
Evenflo model # 207493p2, dom 06/07/96; the padding under the seat comes off easily. The baby has pulled this material out of the padding more than once and placedit in the mouth, which has caused choking. Parents purchased 3 seats for triplets. Ths babies has pulled the padding out of each seat.the manufacturer has not been contacted.
Evenflo model 207293p2, dom june 17, 1996; the adjuster belt of the css does not retract which won't tighten the belt as needed toprotect the child in event of an accident.please provide further information.
Evenflo on my way model # 2111l3p1, dom 09-jan-2001; when tightening harness straps and usingadjuster lever lever on left side would pop off. This causesharness straps to be very loose instead of tight.
Evenflo model # 2071l3p1,dom18 june 1999, while adjusting harnessretractor clip in back of seat broke.
Evenflo model # 2821124p1, dom9 june 2001, harness adjuster in rear of seat broke on both sides.
Hazard:i purchased an evenflo "on my way travel" system in june of 2001. The infant carrier was used for under 1 year. The harness latch box on the left, back of the infant carrier has completely detached "broken".causing great concern about the safety of the product.i contacted the manufacture evenflo; and they said the carrier was "fine" and that they do not guarantee the product after the 1-year warrantee.they said i can purchase a new harness for 16.99 but i reiterated that the harness is not the problem the latch box on the back is.
There is a padded bar that comes over the baby's head. Consumer the bar catches the child's arm between the bar and seat. It pinches the child's arm.the consumer contacted the manufacturer.
Evenflo model #2111069p1, dom 4/ 14/2000;harness strap adjuster popped off while tightening the harness strap.evenflo will be contacted about car seat.
The harness adjuster broke on the left side, while the consumer wasadjusting the harness straps. Model # 2111124p1. The manufacture has been contacted.*la
We own a evenfloon my way model # 8450pvnvinfant rear facing child seat model on the back of the car seat where you tighten the harness there is a major stress point, and it has broken twice. It has only broken when we have went to tighten the harness. If it was to brake during an accident the harness could come free ejecting the child from the seat.
Evenflo car seat adjuster strap broke. Purchase a new one 2 years later and the adjuster broke on that one.the manufacturer stated they tested the adjuster strap and considered it safe.the consumer took the second car seat to the local police station and they stated it was a safetyissue and gave the consumer a new car seat. *sc
Evenflo model # 447102p2, plastic css alignment posts brokeoffwhile consumer was adjusting the harness straps.
The harness strap adjuster did not hold the harness in place. Model # 2071c5p1.
Hanging harness in back of child seat gets caught on stiching.nlm
Evenflo on my way model #4981p5p1,dom 21-sep-1999, consumer'sinfant can get his legs out off harness, it is not possible to adjust harness any tighter.
Evenflo model # 207, dom20-jan-99; harness strap would not stay secure when fastened.manufacturer notified.
The harness straps do not lock up. The baby had took the strap off, and fell out of seat with the harness still around her neck.
Evenflo model # 4471027p1, dom 04-26-2000; locking mechanism in the back to thechild seat that is suppose to holdharness strap in place is not holding the straps. In an accidentinfant will not be secure.
The clip on one side of the car seat broke. The clip is what the seat belt weaved into at the back of the car seat. The actual part that loosened and tightened the set belt broke away from the back of the car seat. The manufacturer replaced the car seat.
Hazard:i purchased an evenflo "on my way travel" system in june of 2001. The infant carrier was used for under 1 year. The harness latch box on the left, back of the infant carrier has completely detached "broken".causing great concern about the safety of the product.i contacted the manufacture evenflo; and they said the carrier was "fine" and that they do not guarantee the product after the 1-year warrantee.they said i can purchase a new harness for 16.99 but i reiterated that the harness is not the problem the latch box on the back is.
While tightening the shoulder harness, the harness adjuster guide pulled off of the rear of the seat, consumer was informed to snap piece back in, after 5 months of tightening harness by pulling the loose end straight down towards the bottom of the seat, the plastic piece cracked and broke off, consumer states that since the harness is pulled directly away from the seat it causes stress to the harness guide, causing the failure, manufacture date 02-aug-2000, seat was purchased new.
The straps on car seat were not adjustable for smaller babies (evenflo on my way 207106p2, manufactured may 15, 1997).*mr *ph *nlm
Evenflo on my way, model #211/mfr. Date, 16 feb 01: the plastic around the screw area broke on the right side of the strap adjuster.
Evenflo model # 492, dom 7/23/97.consumer states thatrestraint broke apart from the seat.manufacturer will be notified.
Infant seat evenflo 25804240 chest strap
The car seats seat belt popped off resulting in the child falling out of the seat andon the cement floor.the handle is defected also there is a red button jams the model #207104p1dec 30 1999 manufacturer date
My wife was involved in a head on collision.she and my two children were choppered to a trauma unit.my 10 week old son was in the evenflo on my way system and the base broke apart upon impact.the system held him in place, but my concern is with the base breaking apart. Model#4921b7p2 manufactured 14 jan98.
No summary listed for above vehicle.
Read more
