We found the following complaints for EVENFLO 201 (DYN-O-MITE) (Unknown)
Read complaints for EVENFLO 201 (DYN-O-MITE) (Unknown)
The child seat sun visor broke while the consumer attempted to lift it (evenflo, model number 4971r4p1)*nlm
Dt: evenflomodel # 3781522p1, domseptember 2, 2004.when the contact went to put the child in the seat she found that the bar had broke where it attached to the seat.the contact was unsure of what caused the brakeage.updated 11/29/05.
The bar attach to the car seats harness fell apart and the child came out the seat.*nlm
Evenflo model # 259 11 34; consumer states that child's safety seat broke while she was snapping the child in the seat.the snaps on the arms of the seat just broke off.
The restrain bar separated.
Dt*: the contact stated the tether strap allowed the seat to shift and tip to the side as the vehicle made a turn to either side.the recliner adjustment did not function properly.
Evenflo child restraint model # 2349l3p2 manufactured date sept 22, 1998.unable to locate any information on this car seat for replacement parts.buckles are worn, cover is torn and won't stay on seat.manufacturer has no recollection of this item in the computers.
- the contact stated that on 01/09/07 the news reported that evenflo discovery safety seat was not safe.the news report stated that the seat dislodged from the base, twisted and felloff.the news stated that the safety seat did't pass safety standards.the contact stated that she called evenflo ,and was told that the seat had not been recalled. The manufacturer told the contact that the seat was safe, and they will not reimburse her for the seat.
The base mechanism on the child seat broke, which left the childunrestrained.
Dt:evenflo model # 5931316n1. Consumer owns an evenflo child restraint t seat hat was part of a travel system. When she was strolling her son the seat was locked in the stroller, but the seat slipped off of stroller.when seat came off of stroller the springs located in the lock mechanism came out, and the handle that unlockedseat from stroller or base came completely off. Also when the seat was in vehicle locked into base the seat will not release from base. Once the seat beltwas removed from base then the seat will unlock from base, she did not know why it won't unlock or will unlock when seat belt was removed.
Dt: evenflomodel # 3781522p1, domseptember 2, 2004.when the contact went to put the child in the seat she found that the bar had broke where it attached to the seat.the contact was unsure of what caused the brakeage.updated 11/29/05.
Evenflo model # 4791255, consumer states that the handle onchild's car seat moves when it is suppose to be locked in place.she has called the manufacturer.consumerhas only had the car seat 11 weeks.she is afaid that the child may fall out.
Dt: a evenflo auramodel # 5501536a, dom 02/13/2005.the seat that came with the system had a problem. . whilecarrying son in the infant seat carrier the handle which should have been locked in position came unlocked and allowed the seat to flip forward and the sonfell out of the seat and onto the concrete sidewalk. Hehit the sidewalk head first,and was taken to the hospital, he only sustainedscrapes and bruises. Thechild wastwo and a half months old. The handle came loose once before, but the child was not in the seat. The seat has numbers on it that do not match any numbers listed in the menu.
Dt*:the contact stated while carrying the infant into the house in the child safety seat, the red button that secures the handle popped out.this caused the seat to flip over and because the infant was not secured in the seat, the infant fell on the ground.the infant has a bruise from the fall.the child safety seat is an evenflo #5481586, manufactured june 4, 2005.
Dt:evenflo model # 5501536a, dom 02/13/2005. The contact stated while carrying child the handle on thechild seat became loose, causing thechild to fall out of the child seat. This caused injury to the contact'sthree month old son because he fellon a cement floor.the handle was damaged, becamevery loose, and will not lock into place. The manufacturer has not been contacted. The child safety seat was replaced.
Dt: evenflo model # 2481185p1,dom 01/03/2002. The contact stated during an accident the harness buckle disconnected on the right side of the five point harness system.there was visible bruising to the child's left side and public area.the child passed away as a result of injuries received in the accident.a police reportwas taken at the scene.the investigation was not completed for the accident.also, while driving around a curve, the contact's grandchild informed her the child seat's buckle failed.the harness buckle disconnected on the right side of the five point harness system.she experienced no problems prior to this incident with this particular seat.however, she experienced the same problem with another child safety seat of the same make and model asaforementioned.
Dt:evenflo 5581356p1, the problem is with the latch on the child safety seat.sometimes the latch will appear to be latched whenactually it was not,and at other times it will not release.it has released before while the consumer has been driving. The child seat was the type that could be hooked on to the stroller or base.the problem occurred in the vehicle.
The latch on the evenflo discovery child seat did not lock (model # 21221223p1). *nlm
Dt:evenflo model # 5931316n1. Consumer owns an evenflo child restraint t seat hat was part of a travel system. When she was strolling her son the seat was locked in the stroller, but the seat slipped off of stroller.when seat came off of stroller the springs located in the lock mechanism came out, and the handle that unlockedseat from stroller or base came completely off. Also when the seat was in vehicle locked into base the seat will not release from base. Once the seat beltwas removed from base then the seat will unlock from base, she did not know why it won't unlock or will unlock when seat belt was removed.
Dt: evenflo model # 36631367p1, dom 06/15/2004. The contact stated the child safety seat harness buckle would not come unlocked.the child safety seat belt harness latchbroke.the child had to be cut out of the child seat.manufacturer has not been contacted.therewere no recalls on this child safety seat.
I was traveling down 231 south through an intersection of deese/231 when some one ran a redlight. Resulting in my injuries along with my children. The hot wheels car seat....fixed into the car correctly failed to keep my child from getting 27 stiches in the head. I would have genrally put him in the middle , but it states on the car seat itself do not put in only lap belt as of which resulted in the child being hurt. I do not feel that he would have a busted head if i had put him in the middle. I had to purchase a new car seat....i still have the old one. I would not recommend this particular booster to anyone. My child has been traumatized and has a life long scarring...
Dt*: the contact stated while catching a bus downtown, the red latch on the bottom of the infant carrier that attaches the carrier to the stroller broke.the carrier moved forward and the baby fell out of the carrier. The baby sustained minor cuts and bruises to the head and was transported to the hospital. The manufacturer of the infant carrier/stroller combination is evenflo, the model number is: 5831270p1 and the date of manufacture is: 06-29-05.
Evenflo titan model # 3661367p1, dom 08/16/2002, child seat broke. Consumer statedthat the spring just popped out.consumercalled evenfloto report the problem.
Dt:evenflo, model # 3591288p1, dom april 18, 2005.the consumerexperienceda problem with the padding not being secure enough so that the child couldnot access the styrofoam underneath.the problem started onseptember 14, 2005.the consumer felt that this should be a recall because of the choking hazard possibility.when he contacted the manufacturer, they said there was norecall at this time.
Evenflo ultra model # 235386p1081095;button is catapulted into the car along with the spring inside the red button.i cannot find the spring in the car, and this is the 2nd time this has happened.unless i check the seat each time i put the child in the seat, i don't know if this has happened again.this condition leaves the seat in an extremely unsafe condition that i would like to have corrected.this is not particularly easy to describe in writing, so please call with any questions.
Dt:evenflo model # 378100p1, dommarch 1,2003.the consumer states the overhead shield popped out while driving.itpopped out on both sides. This happened with the child asleep.the consumer s tried to contact evenflo tonight but they were closed.this happened on 09/11/2005. The child was not injured when this happened.she did have to buy a new seat.
Dt:evenflo model # 2361t2p2, the contact stated while drivingthe overhead shield shattered into two pieces,causing the buckle to break. There were no injuries were reported.
The child seat straps did not work.the middle slots of the harness straps seemed loose in the back, so the consumer returned the child seat in exchange for a new one.(same model/commet tv)the second child seat straps seemed tight enough, until the consumer strapped her 3 year old son into the harness when the harness strap pulled away from the seat and was no longer attached to the right side.evenflo replaced the car seat with the apollo model.scc
Dt*: the contact stated the child seat flipped over continuously and would not stay into place.this started when the child weighed 17 pounds.the child seat capacity is for up to 22 pounds.the seat was taken to an inspection station and the inspector confirmed that the seat was installed properly.
Dt*: the contact stated the tether strap allowed the seat to shift and tip to the side as the vehicle made a turn to either side.the recliner adjustment did not function properly.
Evenflo model # 259 11 34; consumer states that child's safety seat broke while she was snapping the child in the seat.the snaps on the arms of the seat just broke off.
Read more
