We found the following complaints for EDDIE BAUER OTHER (Unknown)
Read complaints for EDDIE BAUER OTHER (Unknown)
My grandmother had purchased a eddie bauer brooke stroller and car seat set online for my baby shower end of september through beginning of august 2011. Purchase was around $300+ which i don't find cheap by any means. Long story short- my 5 month old daughter and i were in a head on collision where i've learned her car seat base was defected during the crash and had actually lifted out of the base and back down. Could have easily went through the windshield. She suffered a broken right femur and a fractured left femur leaving her in a almost full body cast for 4 weeks. I had hit a full sized truck head on leading up to the even the base and car seat detached. The car seat was thrown away sometime while i was in the hospital. I was in a medically induced coma for three days before stating to anyone at the hospital. One of the first responders from the fire department had gotten the baby out from the drivers side door from reaching around me. I have the stroller and the box the set came in but they threw the car seat away. My grandmother should be able to locate purchasing info through her past credit card use if needed.
The contact owns a 2003 eddie bauer 22-720 seat (touriva ohb).while driving 10 mph, another vehicle crashed head on into the contact's vehicle.the vehicle was towed and a police report was filed.the driver was wearing a seat belt, but sustained a bruised neck and bruising on her right side from the air bags and seat belt.the child seat was empty; however, the handle that goes over the child's head completely detached.there was nothing that struck the child seat and the contact does not know how it failed.the purchase date was unknown.
My baby was riding in the back middle seat in the eddie bauer car seat facing the rear and i was driving my toyota scion.when i lifted the cover shade up from the bottom to check on the baby the cover shade fell over the babys face. When i looked back i was scared because the cover was halfway over my babys face.
I have tried this seat in many different vehicles. I travel a lot with my child and have tried it in countless rental vehicles, relatives vehicles as well as my own and i have not been able to get it tight enough in any vehicle. I have tried it in the middle as well as side seats and i have tried it with the latch system. It moves more than the 1 inch rule, it actually slides from side to side no matter how tight the seat belt/latch system and anchor are.also, the black plastic pieces are loose and fall off. I bought mine in canada so my model number is actually 22880cmtt.
Eddie bauer car seat 03/18/10 gb1b ic-048 aah item 1852.
The bolts in the handle of my daughter's car seat keep loosening up. I'm afraid that the bolts are going to loosen up and i'm not going to see it and the handle is going to break causing my daughter to hit the ground or floor. I've had to tighten the bolts about 6 times now in the last 3 months. It is a dorel juvenile eddie bauer edition 3 in one car seat with base and stroller. Model number 22-655 byte manufactured 04/03/08 gb1b and it has a green square on that tag.
About 1 month after i purchased my car seat for my son the screw holding the handle on the left side became loose. I didn't think much of it until it continued to happen. At one point the screw became so loose the left side of the handle bar became completely un attached.im worried that as my son becomes heavier and screw will continue to be loose and could cause serious injury to my son.
I have attempted to install the eddie bauer eb adj booster car seat (model 22880-mtta) in 3 different cars and it simply will not tighten into place. It's as if the shape of the car seat is at a 90 degree angle and thus will not fit into the seat of the car. If the base sits flat on the seat of the car, the head sits straight up, leaning forward from the seat of the car about 6 inches. Tightening it with a belt does no good because it continues to wobble back and forth several inches from front to back or even from side to side. Even the latch system does not work because it only pulls the carseat backwards, leaving a gap of several inches between the base and seat of the car. This is an incredibly dangerous design.
We have attempted to properly install the seat in four different vehicles without any success.the seat never tightens to a secure point that the seat can be used.the bottom of the seat moves and shifts a severe amount no matter how much adjustment is attempted.tightening the straps is challenging and almost makes the slack and movement in the bottom of the seat worst.since we purchased this seat we have been unable to use it.unfortunately, we didn't keep the packaging so we couldn't return it.we've owned other eddie bauer seats that have worked appropriately yet i believe this model is inherently flawed in its design.
I have serious concerns about the safety of the eddie bauer prospect adjustable highback booster (#1447). The model number listed on the seat is 22880-mtta, manufactured 09/06/07. I tried installing this seat in 2 different vehicles- an '06 mazda 5 with the latch system, and two subaru outback wagons (one is late '90s, and the other a 2002 model) using the outboard seat belts (we are using the seat with the 5-point harness, not as a belt-positioning booster). I was not able to get the seat even close to tight in any of these vehicles. I have 2 kids, and have installed a number of car seats without any difficulty. I also looked online, and both target.com and amazon.com reviews cite difficulty with installing this seat. Also note that i had to mark a different model for the booster seat since this model was not listed.
The contact owns a dorel eddie bauer 3-in-1 child seat, model 22-862ebc.the seat was manufactured on march 13, 2004.the contact removed the five point harness to use as a booster and she noticed that the left harness clip failed.she was unable to adjust the strap to fit the baby's height.the contact will notify the manufacturer.the purchase date was unknown.
The contact owns an eddie bauer model 22-627 tgj n/a child seat, serial number 5359-6598, manufacturedon november 17, 2008. She stated that the strap on the base of the child seat does not make a secure connection with the child seat. The vehicle is a 2008 pontiac grand prix. She will contact the manufacturer.
The contact owns an eddie bauer booster seat, model number 22-865chl (na).the seat was manufactured on october 23, 2007.since march of 2009, the bottom of the booster seat has been shredding.in addition, the straps are not reaching over the chld's shoulders.the contact feels that the seat was not measured properly and is defective.the purchase date was unknown.(related vehicle information: model year=2006, make=toyota, model=matrix).
The contact owns an eddie bauer 22-627mtt rearfacing child safety seat, model number 22655 byte.the seat was manufactured on december 4, 2007.when the contact attempted to attach the child seat to the base in the vehicle, the latch would not connect.the contact did not notice any differences with the child seat prior to the installation.
My grandmother had purchased a eddie bauer brooke stroller and car seat set online for my baby shower end of september through beginning of august 2011. Purchase was around $300+ which i don't find cheap by any means. Long story short- my 5 month old daughter and i were in a head on collision where i've learned her car seat base was defected during the crash and had actually lifted out of the base and back down. Could have easily went through the windshield. She suffered a broken right femur and a fractured left femur leaving her in a almost full body cast for 4 weeks. I had hit a full sized truck head on leading up to the even the base and car seat detached. The car seat was thrown away sometime while i was in the hospital. I was in a medically induced coma for three days before stating to anyone at the hospital. One of the first responders from the fire department had gotten the baby out from the drivers side door from reaching around me. I have the stroller and the box the set came in but they threw the car seat away. My grandmother should be able to locate purchasing info through her past credit card use if needed.
The contact owns an eddie bauer by dorel juvenile group infant seat, model #22655, manufacturer in 2007. The contact stated that the side screws were loose on the handle of the child seat which caused it to separate from the base; however, the harness straps kept the child from falling out of the safety seat. The manufacturer has not been notified. She still has possession of the safety seat.
The contact owns an eddie bauer child restraint system model number 22-627 cmp purchased in 2008. The carry handle was very loose. It felt as if it would come disconnected from the carrier shell. The restraint system had not been repaired and the manufacturer had not yet been contacted. The system was manufactured in december of 2006.
About 1 month after i purchased my car seat for my son the screw holding the handle on the left side became loose. I didn't think much of it until it continued to happen. At one point the screw became so loose the left side of the handle bar became completely un attached.im worried that as my son becomes heavier and screw will continue to be loose and could cause serious injury to my son.
While i was carrying my 3 month old in his car seat the screw on side of handle just came loose.this is a good brand of car seat and should not have happened. The store will not let us return it because it has been more than 3 months. The screw is broken so how do they expect me to put a 3 month old in no car seat or what, hello safety first right! also when looking for info on car seat there was no sticker or anything on it to get info so i hope all is correct.all i knew was it is a eddie bauer adventurer travel system- kingston.
The bolts in the handle of my daughter's car seat keep loosening up. I'm afraid that the bolts are going to loosen up and i'm not going to see it and the handle is going to break causing my daughter to hit the ground or floor. I've had to tighten the bolts about 6 times now in the last 3 months. It is a dorel juvenile eddie bauer edition 3 in one car seat with base and stroller. Model number 22-655 byte manufactured 04/03/08 gb1b and it has a green square on that tag.
The contact owns an eddie bauer 22-627 mtt (na) child seat.the contact stated that the handle on the seat was too loose and felt unsafe.there were no recalls on the child seat.the purchase date was unknown.updated 3/5/08 updated 03/05/08
The contact owns an eddie bauer booster seat, model number 22-865chl (na).the seat was manufactured on october 23, 2007.since march of 2009, the bottom of the booster seat has been shredding.in addition, the straps are not reaching over the chld's shoulders.the contact feels that the seat was not measured properly and is defective.the purchase date was unknown.(related vehicle information: model year=2006, make=toyota, model=matrix).
I have attempted to install the eddie bauer eb adj booster car seat (model 22880-mtta) in 3 different cars and it simply will not tighten into place. It's as if the shape of the car seat is at a 90 degree angle and thus will not fit into the seat of the car. If the base sits flat on the seat of the car, the head sits straight up, leaning forward from the seat of the car about 6 inches. Tightening it with a belt does no good because it continues to wobble back and forth several inches from front to back or even from side to side. Even the latch system does not work because it only pulls the carseat backwards, leaving a gap of several inches between the base and seat of the car. This is an incredibly dangerous design.
Cpsc#i11a0031a. Eddie bauer rear view mirror. Consumer stated she brought the mirror because it said it was crash tested. But unfortunately when they got into a car accident their daughter hit her head and cracked the mirror, and her left eyelid was lacerated. *lnthe rear view mirror was hanging on the middle seat head rest area. The consumer stated the mirror was not safe and the crash tested label was misleading advertising. The consumer stated the mirror cracked to easily.
Read more
