We found the following complaints for COMBI 8086 (CENTRE) (Unknown)
Read complaints for COMBI 8086 (CENTRE) (Unknown)
I have a combi baby car seat and its really hard to get the car seat of the base well i cant even get it of my husband only can with two hands. Lets say there was an car excedent and u would need to get the car seat with the baby out fast and u wouldn't.model name:center exmodel number:[xxx]manufactured in:10-29-2008[xxx]. Updated 07/10/2012 information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6)
I am a cpst with 12 years of experience who checks more than 900 seats per year. A father of a 2 day old infant presented today to my fitting station with a combi centre ex infant seat & base that he and his wife had used previously for an older child.since the older child's usea recall had been issued.on one prior occasion several years ago i assisted another family with this recall fix.father informed me that both he and his father-in law had labored for a good bit of time to address the recall on the infant carrier. In checking the carrier connection to the base it seemed somewhat difficult to release from the base.upon exploring further it was very difficult to verify that the recall repair had been correctly done. My complaint is primarily with nhtsa for approving this recall "fix".i think this repair is way too complex for mere mortals! the instructional materials available on the combi website (including the grainy poorly done video) are very difficult to follow. I was very uncomfortable coming behind the dad & grandfather with the responsibility of checking this "repaired" seat that was going to transport a 2 day old.i have ordered a recall fix kit to re-do the repair from square-one.nhtsa...please be more cautious with what you approve as a fix.even though i had previously repaired a similar seat several years ago this "already fixed" seat was a concern. The dificult to follow on-line instructions and video offered no me no reassurance.
My son's carseat was recalled. I contacted the company over 3 months ago and i still have not received the replacement.i e-mailed them again, no reply. I do not know what to do now.combi centre exmodel # 808660manufactured 08-09-2006serial # cc41c0111sc00351
The contact owns a combi centre rearfacing infant seat, model number 808660.the seat was manufactured on october 29, 2005.the contact received a combi recall notice regarding base failure in march of 2008.she ordered the retrofit kit on march 4, 2008.as of may 16, 2008, she has yet to receive the kit.the contact feels that the manufacturer has exceeded a reasonable mailing time.there had been no failure to date.
The contact owns a combi centre (8086) rearfacing infant seat.the seat was manufactured on december 4, 2005.the contact received a recall notice in february of 2008.the manufacturer stated that the repair kit would be sent; however, as of may 30, 2008, the contact still has not received the kit.he called the manufacturer to inquire as to how much longer it would be before his kit arrived, but they could not provide any information.the contact needs the child seat repaired for his newborn baby to use.the recall number and secured in vehicle method were unavailable.
I have a combi baby car seat and its really hard to get the car seat of the base well i cant even get it of my husband only can with two hands. Lets say there was an car excedent and u would need to get the car seat with the baby out fast and u wouldn't.model name:center exmodel number:[xxx]manufactured in:10-29-2008[xxx]. Updated 07/10/2012 information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6)
The contact owns a combi (centre) rearfacing infant seat, model number 808680.the seat was manufactured on december 12, 2005.the contact received a recall notice in february of 2008.she called the manufacturer at that time and still has not received her repair kit.the contact called the manufacturer in april of 2008 and was informed that it would take 6 to 8 weeks to receive the kit.the failure type was unknown.there had been no failure to date.
The contact owns a combi centre ex 808688 rearfacing infant seat.the seat was manufactured on february 2, 2007.the contact received a recall notice on the base of the child safety seat in march of 2008.the notice stated that by mid april of 2008 she would receive a retro fit kit for the repair.by may of 2008, the contact still had not received any repair kits.the manufacturer explained that the parts were on back order.as of june 9, 2008, the parts have still not arrived and she must continue to use the defected seat. Updated 06/25/08 updated 06/25/08.updated 7/3/08 updated
The contact owns a 2007 combi centrerear facing infant seat, model number 808688.the seat was manufactured on december 11, 2006.the contact received a recall notice for nhtsa campaign id number 08c004000 (child seat:base (infant)) in february of 2008.she immediately called the manufacturer to receive the repair kit; however, a representative stated that she would not receive the parts until april of 2008.the contact called the manufacturer back and a representative purposely disconnected the call.she has not received the parts as of may 27, 2008.there had been no failure to date. Updated 6/16/08 the consumer stated as of june 3, 2008 she still had not received the kit. Updated
My son's carseat was recalled. I contacted the company over 3 months ago and i still have not received the replacement.i e-mailed them again, no reply. I do not know what to do now.combi centre exmodel # 808660manufactured 08-09-2006serial # cc41c0111sc00351
I am a cpst with 12 years of experience who checks more than 900 seats per year. A father of a 2 day old infant presented today to my fitting station with a combi centre ex infant seat & base that he and his wife had used previously for an older child.since the older child's usea recall had been issued.on one prior occasion several years ago i assisted another family with this recall fix.father informed me that both he and his father-in law had labored for a good bit of time to address the recall on the infant carrier. In checking the carrier connection to the base it seemed somewhat difficult to release from the base.upon exploring further it was very difficult to verify that the recall repair had been correctly done. My complaint is primarily with nhtsa for approving this recall "fix".i think this repair is way too complex for mere mortals! the instructional materials available on the combi website (including the grainy poorly done video) are very difficult to follow. I was very uncomfortable coming behind the dad & grandfather with the responsibility of checking this "repaired" seat that was going to transport a 2 day old.i have ordered a recall fix kit to re-do the repair from square-one.nhtsa...please be more cautious with what you approve as a fix.even though i had previously repaired a similar seat several years ago this "already fixed" seat was a concern. The dificult to follow on-line instructions and video offered no me no reassurance.
Combi centre ex 808688. Consumer would like to know if this car seat is safe *tgw
Read more
