We found the following complaints for BABY TREND HYBRID 3-IN-1 (Unknown)
Read complaints for BABY TREND HYBRID 3-IN-1 (Unknown)
The contact owns a baby trend child safety seat, model number: fb58718, model: hydrid 3-in-1, and manufactured in june 21, 2015. The contact stated that the safety seat chest clips fractured while releasing the baby from the seat. The manufacturer was notified of the failure and indicated that a replacement part would be sent.
The contact owned a 2014 baby trend hybrid 3-in-1 booster seat. While driving 25 mph, another vehicle crashed into the rear of the contact's vehicle at a high rate of speed. The driver sustained whiplash and the child passenger was fatally wounded due to the impact of the crash. The seat belt did not secure the child during the crash. A police report was filed. The vehicle was towed to a yard and the booster seat was discarded. The contact could not diagnose what caused the failure. The manufacturer and the insurance company did not provide further disclosure on the investigation of the crash. The purchase date was unknown....updated 04/19/16 see also 10855262 *dsy...updated 05/24/16 updated 09/19/2017
A mother, child, and grandmother were involved in a head on collision with another driver. The metal bracket on the back of the child's seat was broken, and the child and his car seat were thrown forward. The child sustained head injuries that have resulted in permanent brain injuries. Updated 08/15/17 updated 09/18/17
I was traveling from las vegas, nv to twin falls, id with my son [xxx] on dec 14 2015 to visit family for christmas. My son [xxx] was a week from turning 4, weighed 37 lbs and was 38 inches tall. I had him in the baby trend hybrid 3 in 1 lx (kiwi color) forward facing in the 5 point harness. At around 9pm mountain standard time on dec 14 2015 my son [xxx] was able to pull the slack on his harness loose after unclipping his chest clip and freed his upper arms. The moment i noticed he had done this our small car was hit head on by a pickup truck that was driving at a high rate of speed. Since [xxx] lower body was the only thing restrained his upper body was thrown forward at a high rate of speed which caused a hyper extension and severance of his spinal cord at the c3- c4 vertebrae. [xxx] passed away at the scene of the crash within seconds. ...updated 04/19/16 see also 10859748 *dsy.....updated 05/24/16 updated 09/19/2017 information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6).
The contact owns a 2014 baby trend hybrid 3-in-1 booster seat, model number: fb48079. The seat was manufactured on january 29, 2015 and being utilized in a 2000 lexus es300. While attempting to strap the child into the safety seat, the harness buckle fractured. As a result, the contact was unable to utilize the safety seat. The failure occurred inside the vehicle. The child was in the safety seat at the time of the failure. The manufacturer was not notified of the failure. The vin was not available.
The contact owns a baby trend safety seat, model: hybrid 3-in-1, model number: fb58718 and manufactured in july 01,2013. The contact stated that while attempting to place the child in the child safety seat the chest clip fractured. The safety seat was not replaced. The manufacturer was not notified of the failure.
Chest bucket snapped in 1/2 rendering it useless. And unsafe
Cpsc: baby trend hybrid lx 3-in-1: consumer stated she and her son, were involved in a head-on collision. After the accident, the consumer noticed the chest clip had un-latched and her son was dangling out of the car seat and was barely in the shoulder straps, despite being correctly placed in the car seat. The consumer's son passed away from his injuries. Model # fb48417. *sssee also odi 10855262 *dsy
The strap is broken.(related vehicle information: model year=2001, make=toyota, model=sqeouia)
I purchased two of the baby trend hybrid 3-in-1 car seats - edge (item #: fb58718) from babies 'r uson 11/5/2015.about a month ago, one of the car seat's harness buckle stopped functioning.and this week, the other car seat's harness buckle stopped functioning.the result is the bucket does not safely keep my child in place as it opens on its own; does not lock.i contacted babies 'r us, who indicated there is nothing they can do about replacing the car seat or the buckle as it is beyond their 90 day return policy.i contacted baby trend, who indicated all they can do is provide us with a new harness for the two carseats. I requested the same, but indicated:1)i am still concerned even with a replacement buckle since i have witnessed two buckles stop functioning as they are supposed to well within the timeframe a child can use this car seat, and 2)i am surprised there is no recall on this car seat, particularly as i have found numerous complaints online about the same issue for this exact convertible car seat.as such, i am reporting this safety concern to you, with the hopes that a product safety recall can be issued.
The car seat latch has cracked this will not stay closed and would be dangerous baby trend hybrid lx 3-in-1 manufactured 7-20-2015 serial no fb48181 ff 000226 model no fb48079
As i tried buckling my child, my child's car seat, top chest buckle wouldn't clip in to place, it wouldn't stay buckled,an as i was trying to buckle the chest buckle the clip broke snapped in half...i just read a bunch of complaints that are the same as mine...why is there no recall on this product...
Cpsc: i have a baby trend car seat hybrid 3 in 1 model # fb48417. As i was trying to buckle my child in the car seat thechest clip broke. This is not a car seat that is used heavily. It is a spare that is kept in another vehicle. It concerned m because the clip seems to not be very sturdy to withstand an impact if it were to occur.updated 06/28/2017
Chest bucket snapped in 1/2 rendering it useless. And unsafe
Cpsc: baby trend hybrid lx 3-in-1: consumer stated she and her son, were involved in a head-on collision. After the accident, the consumer noticed the chest clip had un-latched and her son was dangling out of the car seat and was barely in the shoulder straps, despite being correctly placed in the car seat. The consumer's son passed away from his injuries. Model # fb48417. *sssee also odi 10855262 *dsy
The plastic chest clip no longer stays closed. When buckling my son into the seat i clip the plastic device together and without much effort can pull it apart because it doesn't catch anymore. My son who's 3 can pull it apart with little effort. Model # fb58588. Baby trend 3-in-1. This car seat has now become extremely dangerous.
I was strapping my daughter into her seat when the plastic piece that hooks across her chest broke off into my hand. I was not able to completely fasten her in, i had to drive her without being strapped in to my mother's house so i could switch car seats with her. There was nothing i could do to correct the failure.
Without notice the chest buckle broke leaving the car seat unsafe for my 2 year old. I have only had the car seat for about 2 months
The contact owns a 2014 baby trend hybrid 3-in-1 safety seat, model number fb58588. The seat was manufactured on march 2,2014. When attempting to unlock the childfrom the seat harness, the chest clip fractured. The failure occurred once. The manufacturer was not aware of the failure. The purchase date was unknown.
I purchased two of the baby trend hybrid 3-in-1 car seats - edge (item #: fb58718) from babies 'r uson 11/5/2015.about a month ago, one of the car seat's harness buckle stopped functioning.and this week, the other car seat's harness buckle stopped functioning.the result is the bucket does not safely keep my child in place as it opens on its own; does not lock.i contacted babies 'r us, who indicated there is nothing they can do about replacing the car seat or the buckle as it is beyond their 90 day return policy.i contacted baby trend, who indicated all they can do is provide us with a new harness for the two carseats. I requested the same, but indicated:1)i am still concerned even with a replacement buckle since i have witnessed two buckles stop functioning as they are supposed to well within the timeframe a child can use this car seat, and 2)i am surprised there is no recall on this car seat, particularly as i have found numerous complaints online about the same issue for this exact convertible car seat.as such, i am reporting this safety concern to you, with the hopes that a product safety recall can be issued.
The contact owns a baby trend hybrid 3-in-1 booster seat, model number fb58935 (na). The seat was manufactured on may 26, 2014. The contact stated that the buckle associated with the chest strap prematurely fractured without warning. The contact had to make a temporary contraption to secure the buckle. The car seat was unable to be secured and properly used due to the failure. The manufacturer was not notified. The purchase date was unknown.
Harness clip locking tab broken and doesn't allow it to latch, car seat is less than 6 months old.
The contact owns a baby trend hybrid 3-in-1 safety seat, model number: fb58935. The seat was manufactured on november 11, 2013. After securing the child in the seat, the chest clip fractured. As a result, the contact discontinued utilizing the child seat. The manufacturer was not made aware of the failure. The child seat was not replaced. The purchase date was unknown.
The contact owns a 2014 baby trend hybrid 3-in-1 booster seat, model number: fb48079. The seat was manufactured on january 29, 2015 and being utilized in a 2000 lexus es300. While attempting to strap the child into the safety seat, the harness buckle fractured. As a result, the contact was unable to utilize the safety seat. The failure occurred inside the vehicle. The child was in the safety seat at the time of the failure. The manufacturer was not notified of the failure. The vin was not available.
Just over a year ago we purchased the hybrid 3 in 1 fb58718. Two days ago i buckled my son in and started driving. He informed my the chest clip wasn't staying closed. A part of the front chest clip had just fallen off. If the chest clip breaks that easy with no force after only one year of use how is it supposed to protect my child in an accident? saftey first does not put our children's safety first!! i am disappointed in this product and upset that this has not been recalled.
The chest clip (harness tie) cracked on the male side and it doesn't stay closed now.babytrend is supposed to be mailing a new one.
Chest clip broke off my child's baby trend car seat on their website plenty of people are having the same problem their response is the chest clip isn't necessary and ok to drive without they will not refund money
The contact owns a baby trend safety seat, model: hybrid 3-in-1. The contact stated that the child was able to exit the child safety seat through the strap harness. The contact mentioned that the harness strap failed to secure the child. The failure recurred multiple times. The child safety seat was not repaired or replaced. The manufacturer was not notified of the failure. The purchase date was unknown.
I purchased a baby trend hybrid lx 3 in 1 booster seat for my child on july 20,2015. On january 25,2016 i was unbuckling my son and the chest snap broke in half.
Baby trend 3 in 1 hybrid model # fb 58718.not even a year old and the chest buckle latch broke off in my hand by simply trying to snap the buckle closed.the child safety seat is can not be used and should be recalled as if it will break with just a simple snap into the buckle- how can it be expected to withstand a car crash.baby trend offered to send a replacement buckle, but i believe an investigation needs to be completed to address the safety concerns of the child seat.
The straps on my baby trend 3-in-1 car seat loosen every time my child leans forward. I have tried to tighten the straps but when pulled on they come lose again. I tried checking to see if the button was jammed but that didn't do anything. My child is not safe in this seat. When i called baby trend they said the car seat wasn't under warranty and they wouldn't do anything about it but i could take the straps off and try to clean the adjuster. This seat needs to be recalled. Such a huge risk for children everywhere. Updated 10/11/18
Experienced cpst purchased baby trend hybrid lx 3 in 1 child restraint model # fb48166 (mfg 07-27-2015 at babies -r-us in august of 2016. Seat was on the sale isle with manufacturer tags still intact. Cpst was unable to successfully remove harness straps from ""double splitter plate" (behind the seat) connected to the harness adjustor strap.being unable to remove the shoulder straps from the splitter plate renders this seat unsafe for any child whose shoulders are above the first set of shoulder slots. I suspect that this situation reflects either a very poor design or more likely an assembly error.newer models seem to have a similar "double splitter plate" but the harness straps are threaded onto the splitter plate in a much more intuitive & less complex manner.after noting several reviews and videos on line that mentioned this problem i contacted baby trend directly to see if perhaps theywere offering a harness replacement upgrade. They were unable to offer a complete harness replacement (including the harness adjustor strap / splitter plate. I returned the seat to babies r-us and requested that it be sent back to the manufacturer marked as defective product. I feel certain after looking atreviews on line and seeing at least 1 video intended to show parents "how to fix the problem" ...that there are a significant number of seats that have been sold. I checked with baby trendon 10-3-16 to see if
The chest clip on my child's car seat broke after about a year of normal use.as i read the complaints on the website they are all the same and about the same chest clip. What i don't understand is why the company does not want to replace or refund or even put a recall on this part. This is outragous and unacceptable ... Thank god that as of yet nothing serious or major has occurred but i strongly suggest that something be done about this immediately. Baby trend model # fb58718 hybrid 3 in 1
The contact owns a baby trend safety seat, hybrid 3-in-1, model number: fb58935, manufacturer 5/26/2014. The contact stated that while strapping the child in the seat, the chest clip fractured preventing the harness from being strapped correctly. The manufacturer was not made aware of the failure. The child seat was replaced.
My child has the baby trend hybrid 3-1 seat, and after only owning it for a year the chest clip just fell apart!! god forbid if we would have been in an accident.after reviewing their facebook website, this is an ongoing problem that should be recalled!!
Very concerned parent. Bought baby trend hybrid3 in 1 carseats for children a little over a month ago. The buckle at chest snapped in two (vertically) for no reason at all. Wondering if would even hold up in an accident? also concerned the buckle at bottom is difficultto unbuckleshould a fire/accidentoccur. Would whomever be able to get children out easily.this buckle is much worse than the graco buckle i had that was recalled.
The contact owns a 2014 baby trend hybrid 3-in-1 booster seat, model number: fb48079 (na). The seat was manufactured on january 10, 2015. The contact stated that the booster seat's chest harness strap fractured. When the unlatch button was depressed, the harness strap fractured without warning. The manufacturer was not made aware of the issue. The purchase date was unknown.
Cheat clip comes undone on our baby trend hybrid seat. It comes unlatched without pressing the button on the clip. Happened several times while i was driving and when i looked into the problem this chest clip comes apart with very little movement.
The contact owns a baby trend safety seat, model number: fb58145, model type: hybrid 3 in 1, and manufactured in december 04, 2014. The contact stated that the latch at the top of the child safety seat fractured causing the entire safety seat to become unusable. The failure occurred inside of the vehicle. The child was in the safety seat at the time of the failure. The manufacturer was not made aware of the failure.
The straps on my baby trend 3-in-1 car seat loosen every time my child leans forward. I have tried to tighten the straps but when pulled on they come lose again. I tried checking to see if the button was jammed but that didn't do anything. My child is not safe in this seat. When i called baby trend they said the car seat wasn't under warranty and they wouldn't do anything about it but i could take the straps off and try to clean the adjuster. This seat needs to be recalled. Such a huge risk for children everywhere. Updated 10/11/18
Cpsc: baby trend: consumer states the chest clip and tab can no longer be used. *ssthe consumer stated as she unfastened the chest clip. It snapped off completely.serial # fb58134ff000675
The contact owns a 2014 baby trend hybrid 3-in-1 booster seat, model number: fb58145. The seat was manufactured on december 4, 2014. The latch at the top of the child safety seat was fractured, which rendered the entire safety seat unusable. The failure occurred inside the vehicle. The child was in the safety seat at the time of the failure. The manufacturer was not made aware of the failure.
The chest clip on the harness comes apart while driving, when child moves, or when pulled on without pressing the button.
I was traveling from las vegas, nv to twin falls, id with my son [xxx] on dec 14 2015 to visit family for christmas. My son [xxx] was a week from turning 4, weighed 37 lbs and was 38 inches tall. I had him in the baby trend hybrid 3 in 1 lx (kiwi color) forward facing in the 5 point harness. At around 9pm mountain standard time on dec 14 2015 my son [xxx] was able to pull the slack on his harness loose after unclipping his chest clip and freed his upper arms. The moment i noticed he had done this our small car was hit head on by a pickup truck that was driving at a high rate of speed. Since [xxx] lower body was the only thing restrained his upper body was thrown forward at a high rate of speed which caused a hyper extension and severance of his spinal cord at the c3- c4 vertebrae. [xxx] passed away at the scene of the crash within seconds. ...updated 04/19/16 see also 10859748 *dsy.....updated 05/24/16 updated 09/19/2017 information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6).
The strap is broken.(related vehicle information: model year=2001, make=toyota, model=sqeouia)
I was traveling from las vegas, nv to twin falls, id with my son [xxx] on dec 14 2015 to visit family for christmas. My son [xxx] was a week from turning 4, weighed 37 lbs and was 38 inches tall. I had him in the baby trend hybrid 3 in 1 lx (kiwi color) forward facing in the 5 point harness. At around 9pm mountain standard time on dec 14 2015 my son [xxx] was able to pull the slack on his harness loose after unclipping his chest clip and freed his upper arms. The moment i noticed he had done this our small car was hit head on by a pickup truck that was driving at a high rate of speed. Since [xxx] lower body was the only thing restrained his upper body was thrown forward at a high rate of speed which caused a hyper extension and severance of his spinal cord at the c3- c4 vertebrae. [xxx] passed away at the scene of the crash within seconds. ...updated 04/19/16 see also 10859748 *dsy.....updated 05/24/16 updated 09/19/2017 information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6).
Cpsc: baby trend hybrid lx 3-in-1: consumer stated she and her son, were involved in a head-on collision. After the accident, the consumer noticed the chest clip had un-latched and her son was dangling out of the car seat and was barely in the shoulder straps, despite being correctly placed in the car seat. The consumer's son passed away from his injuries. Model # fb48417. *sssee also odi 10855262 *dsy
The contact owned a 2014 baby trend hybrid 3-in-1 booster seat. While driving 25 mph, another vehicle crashed into the rear of the contact's vehicle at a high rate of speed. The driver sustained whiplash and the child passenger was fatally wounded due to the impact of the crash. The seat belt did not secure the child during the crash. A police report was filed. The vehicle was towed to a yard and the booster seat was discarded. The contact could not diagnose what caused the failure. The manufacturer and the insurance company did not provide further disclosure on the investigation of the crash. The purchase date was unknown....updated 04/19/16 see also 10855262 *dsy...updated 05/24/16 updated 09/19/2017
Read more
